Unleash the Power of Linux on Your Chromebook: An Installation Guide for 20

How to Install Linux on Chromebook

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Say Goodbye to Upside-Down Videos: A Quick Fix Guide

How to Flip Video Quickly and Easily

Ollie Mattison

Mar 27, 2024• Proven solutions

It’s very common that you filmed some amazing portrait or landscape videos but in the wrong direction. This is an error made by many people because not everyone will always think about orientation when filming. Is there an easy way to flip/rotate videos so that you can watch them without turning your head sideways?

What you need is just an ease to use video editor like Wondershare Filmora to flip/rotate your video clips easily and quickly. This application offers a remarkably easy way to flip videos clockwise or anticlockwise, horizontal or vertical. What’s more, this flip software also offers a broad range of video editing features, effects and intro/credits.

In the following, I’ll describe how to flip a video in Windows using this video flip program. If you’re a Mac user, just adopt Wondershare Filmora X for Mac (Latest Filmora version X for Mac) to achieve the same.

First, please download Filmora X for free as per your operating system, and then follow the steps below.

1. Import Your Original Video Clips

After launching Filmora X, click “New Project” to begin. Click “Import” to browse your file folder on computer or drag the video clips directly into the media library.

When you import all of them, click the thumbnails showing in the left pane to preview in the right screen window.

Note that this video editor supports an array of video & audio formats, such as MOV, MP4, AVI, WMV, DV, avchd (MTS, M2TS). And still image files like JPG, BMP, JPEG, PNG. TIFF are all fully compatible.

And then drag your video files from media library to the video Timeline.

Learn the complete list of supported files formats of Filmora X.

2. Flip the Whole Video

Then double click the video in the timeline to access the editing panel. In the window that appears, switch to Video tab and you will find Transform option located on the top.

Click on the Transform to expand the four options including Rotate, Flip, Scale and Position. To get the effect you need, you can adjust the Rotate and Flip settings and check the real-time effect in the previewing window. Though only four buttons available, you can create more options by using them together.

• Rotate: rotate video at any angle by entering the angle value or moving the Rotate slide: rotate 90° clockwise & anti-clockwise, rotate at 180°, rotate 270°, and more
• Flip: Flip video horizontally, i.e. flip video left to right; flip video vertically that is fliping video upside down
• You can combine Rotate and Flip feature to flip video vertically and rotate 90°clockwise or flip video vertically and rotate 90°counterclockwise.

Besides, you can also change the video position and the video scale. This is the step of flips the whole part of the video.

3. Flip Only a Part of the Video

Sometimes, you may just need to flip parts of your video file, e.g. only 1 minute instead of the whole video. In this case, you need to split your video into separate files , and then repeat step 2 to flip them individually.

To do it, just move the playhead to the position you want to split, and click the “Scissors” icon in the menu bar.

Learn more about how to split videos

4 Export Flipped Video

When you’re satisfied with the result, click “Export” in the middle right to save the flipped video. In the pop-up output window that appears, select your wanted format or configured preset for your portable player directly to watch on the go.

You may also want to upload your creation to YouTube or burn to DVD disc for better preservation, just go for it. Finally, click Export to let this video flip program perform the rest.

With the latest Filmora X video editor, you can do more than just flipping video files. For example, you can apply special effects, add background music, create picture-in-picture effect, and more. Try it now!

Check Best Program to Flip Video

---

Conclusion

If you are someone that can’t be bothered to learn a new video editor or someone that doesn’t want to fuss around and just want to get things done, Filmora is designed for you. Known for its lowest learning curve and low price, Filmora can help you to get the job done easily. Try it out with the buttons below to see if it matches your appetite.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

It’s very common that you filmed some amazing portrait or landscape videos but in the wrong direction. This is an error made by many people because not everyone will always think about orientation when filming. Is there an easy way to flip/rotate videos so that you can watch them without turning your head sideways?

What you need is just an ease to use video editor like Wondershare Filmora to flip/rotate your video clips easily and quickly. This application offers a remarkably easy way to flip videos clockwise or anticlockwise, horizontal or vertical. What’s more, this flip software also offers a broad range of video editing features, effects and intro/credits.

In the following, I’ll describe how to flip a video in Windows using this video flip program. If you’re a Mac user, just adopt Wondershare Filmora X for Mac (Latest Filmora version X for Mac) to achieve the same.

First, please download Filmora X for free as per your operating system, and then follow the steps below.

1. Import Your Original Video Clips

After launching Filmora X, click “New Project” to begin. Click “Import” to browse your file folder on computer or drag the video clips directly into the media library.

When you import all of them, click the thumbnails showing in the left pane to preview in the right screen window.

Note that this video editor supports an array of video & audio formats, such as MOV, MP4, AVI, WMV, DV, avchd (MTS, M2TS). And still image files like JPG, BMP, JPEG, PNG. TIFF are all fully compatible.

And then drag your video files from media library to the video Timeline.

Learn the complete list of supported files formats of Filmora X.

2. Flip the Whole Video

Then double click the video in the timeline to access the editing panel. In the window that appears, switch to Video tab and you will find Transform option located on the top.

Click on the Transform to expand the four options including Rotate, Flip, Scale and Position. To get the effect you need, you can adjust the Rotate and Flip settings and check the real-time effect in the previewing window. Though only four buttons available, you can create more options by using them together.

• Rotate: rotate video at any angle by entering the angle value or moving the Rotate slide: rotate 90° clockwise & anti-clockwise, rotate at 180°, rotate 270°, and more
• Flip: Flip video horizontally, i.e. flip video left to right; flip video vertically that is fliping video upside down
• You can combine Rotate and Flip feature to flip video vertically and rotate 90°clockwise or flip video vertically and rotate 90°counterclockwise.

Besides, you can also change the video position and the video scale. This is the step of flips the whole part of the video.

3. Flip Only a Part of the Video

Sometimes, you may just need to flip parts of your video file, e.g. only 1 minute instead of the whole video. In this case, you need to split your video into separate files , and then repeat step 2 to flip them individually.

To do it, just move the playhead to the position you want to split, and click the “Scissors” icon in the menu bar.

Learn more about how to split videos

4 Export Flipped Video

When you’re satisfied with the result, click “Export” in the middle right to save the flipped video. In the pop-up output window that appears, select your wanted format or configured preset for your portable player directly to watch on the go.

You may also want to upload your creation to YouTube or burn to DVD disc for better preservation, just go for it. Finally, click Export to let this video flip program perform the rest.

With the latest Filmora X video editor, you can do more than just flipping video files. For example, you can apply special effects, add background music, create picture-in-picture effect, and more. Try it now!

Check Best Program to Flip Video

---

Conclusion

If you are someone that can’t be bothered to learn a new video editor or someone that doesn’t want to fuss around and just want to get things done, Filmora is designed for you. Known for its lowest learning curve and low price, Filmora can help you to get the job done easily. Try it out with the buttons below to see if it matches your appetite.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

It’s very common that you filmed some amazing portrait or landscape videos but in the wrong direction. This is an error made by many people because not everyone will always think about orientation when filming. Is there an easy way to flip/rotate videos so that you can watch them without turning your head sideways?

What you need is just an ease to use video editor like Wondershare Filmora to flip/rotate your video clips easily and quickly. This application offers a remarkably easy way to flip videos clockwise or anticlockwise, horizontal or vertical. What’s more, this flip software also offers a broad range of video editing features, effects and intro/credits.

In the following, I’ll describe how to flip a video in Windows using this video flip program. If you’re a Mac user, just adopt Wondershare Filmora X for Mac (Latest Filmora version X for Mac) to achieve the same.

First, please download Filmora X for free as per your operating system, and then follow the steps below.

1. Import Your Original Video Clips

After launching Filmora X, click “New Project” to begin. Click “Import” to browse your file folder on computer or drag the video clips directly into the media library.

When you import all of them, click the thumbnails showing in the left pane to preview in the right screen window.

Note that this video editor supports an array of video & audio formats, such as MOV, MP4, AVI, WMV, DV, avchd (MTS, M2TS). And still image files like JPG, BMP, JPEG, PNG. TIFF are all fully compatible.

And then drag your video files from media library to the video Timeline.

Learn the complete list of supported files formats of Filmora X.

2. Flip the Whole Video

Then double click the video in the timeline to access the editing panel. In the window that appears, switch to Video tab and you will find Transform option located on the top.

Click on the Transform to expand the four options including Rotate, Flip, Scale and Position. To get the effect you need, you can adjust the Rotate and Flip settings and check the real-time effect in the previewing window. Though only four buttons available, you can create more options by using them together.

• Rotate: rotate video at any angle by entering the angle value or moving the Rotate slide: rotate 90° clockwise & anti-clockwise, rotate at 180°, rotate 270°, and more
• Flip: Flip video horizontally, i.e. flip video left to right; flip video vertically that is fliping video upside down
• You can combine Rotate and Flip feature to flip video vertically and rotate 90°clockwise or flip video vertically and rotate 90°counterclockwise.

Besides, you can also change the video position and the video scale. This is the step of flips the whole part of the video.

3. Flip Only a Part of the Video

Sometimes, you may just need to flip parts of your video file, e.g. only 1 minute instead of the whole video. In this case, you need to split your video into separate files , and then repeat step 2 to flip them individually.

To do it, just move the playhead to the position you want to split, and click the “Scissors” icon in the menu bar.

Learn more about how to split videos

4 Export Flipped Video

When you’re satisfied with the result, click “Export” in the middle right to save the flipped video. In the pop-up output window that appears, select your wanted format or configured preset for your portable player directly to watch on the go.

You may also want to upload your creation to YouTube or burn to DVD disc for better preservation, just go for it. Finally, click Export to let this video flip program perform the rest.

With the latest Filmora X video editor, you can do more than just flipping video files. For example, you can apply special effects, add background music, create picture-in-picture effect, and more. Try it now!

Check Best Program to Flip Video

---

Conclusion

If you are someone that can’t be bothered to learn a new video editor or someone that doesn’t want to fuss around and just want to get things done, Filmora is designed for you. Known for its lowest learning curve and low price, Filmora can help you to get the job done easily. Try it out with the buttons below to see if it matches your appetite.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

It’s very common that you filmed some amazing portrait or landscape videos but in the wrong direction. This is an error made by many people because not everyone will always think about orientation when filming. Is there an easy way to flip/rotate videos so that you can watch them without turning your head sideways?

What you need is just an ease to use video editor like Wondershare Filmora to flip/rotate your video clips easily and quickly. This application offers a remarkably easy way to flip videos clockwise or anticlockwise, horizontal or vertical. What’s more, this flip software also offers a broad range of video editing features, effects and intro/credits.

In the following, I’ll describe how to flip a video in Windows using this video flip program. If you’re a Mac user, just adopt Wondershare Filmora X for Mac (Latest Filmora version X for Mac) to achieve the same.

First, please download Filmora X for free as per your operating system, and then follow the steps below.

1. Import Your Original Video Clips

After launching Filmora X, click “New Project” to begin. Click “Import” to browse your file folder on computer or drag the video clips directly into the media library.

When you import all of them, click the thumbnails showing in the left pane to preview in the right screen window.

Note that this video editor supports an array of video & audio formats, such as MOV, MP4, AVI, WMV, DV, avchd (MTS, M2TS). And still image files like JPG, BMP, JPEG, PNG. TIFF are all fully compatible.

And then drag your video files from media library to the video Timeline.

Learn the complete list of supported files formats of Filmora X.

2. Flip the Whole Video

Then double click the video in the timeline to access the editing panel. In the window that appears, switch to Video tab and you will find Transform option located on the top.

Click on the Transform to expand the four options including Rotate, Flip, Scale and Position. To get the effect you need, you can adjust the Rotate and Flip settings and check the real-time effect in the previewing window. Though only four buttons available, you can create more options by using them together.

• Rotate: rotate video at any angle by entering the angle value or moving the Rotate slide: rotate 90° clockwise & anti-clockwise, rotate at 180°, rotate 270°, and more
• Flip: Flip video horizontally, i.e. flip video left to right; flip video vertically that is fliping video upside down
• You can combine Rotate and Flip feature to flip video vertically and rotate 90°clockwise or flip video vertically and rotate 90°counterclockwise.

Besides, you can also change the video position and the video scale. This is the step of flips the whole part of the video.

3. Flip Only a Part of the Video

Sometimes, you may just need to flip parts of your video file, e.g. only 1 minute instead of the whole video. In this case, you need to split your video into separate files , and then repeat step 2 to flip them individually.

To do it, just move the playhead to the position you want to split, and click the “Scissors” icon in the menu bar.

Learn more about how to split videos

4 Export Flipped Video

When you’re satisfied with the result, click “Export” in the middle right to save the flipped video. In the pop-up output window that appears, select your wanted format or configured preset for your portable player directly to watch on the go.

You may also want to upload your creation to YouTube or burn to DVD disc for better preservation, just go for it. Finally, click Export to let this video flip program perform the rest.

With the latest Filmora X video editor, you can do more than just flipping video files. For example, you can apply special effects, add background music, create picture-in-picture effect, and more. Try it now!

Check Best Program to Flip Video

---

Conclusion

If you are someone that can’t be bothered to learn a new video editor or someone that doesn’t want to fuss around and just want to get things done, Filmora is designed for you. Known for its lowest learning curve and low price, Filmora can help you to get the job done easily. Try it out with the buttons below to see if it matches your appetite.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Split, Trim, and Cut AVI Videos: Best Software and Apps for Every Need

With the growing fame of video-sharing and social media applications like Twitter, Instagram, and TikTok, the demand for simple and fast video cutting and trimming tools has dramatically increased. Nowadays, you don’t have to play with complex video editing tools to produce high-quality videos.

Thanks to several user-friendly editing software to make things easy for everybody. However, finding the right programs to trim/cut videos is still challenging, especially in AVI format.

But, guess what? These top 16 AVI video cutters for Windows, MAC, Android, iPhone, and online will make video cutting and trimming fun, especially when you learn to do it using Filmora.

In this Article

Part 1: Best AVI Video Cutter to Trim/Cut AVI Video on Windows and MAC – Filmora Video Cutter [with steps}

Part 2: Top 3 Free AVI Video Cutter on Windows

Part 3: Top 3 Free AVI Video Cutter on MAC

Part 4: Top 3 Free AVI Video Cutter on Android

Part 5: Top 3 Free AVI Video Cutter on iPhone

Part 6: Top 3 Free AVI Video Cutter Online

Part 7: Bottom Line

Part 8: FAQs

Part 1: Best AVI Video Cutter to Trim/Cut AVI Video on Windows and MAC – Filmora Video Cutter [with steps]

Filmora by Wondershare is a star video editor with outstanding outcomes. Whether you have a MAC or Windows PC, you can download Filmora regardless of your operating system. The program best serves those who intend to make high-quality videos. The software provides editing support for all video formats, including AVI.

Although Filmora is an affordable editor with tons of audio and video editing options, you can still download the software for free and create projects if watermarks don’t bother you. Moreover, you can count this tool’s capabilities in cropping, resizing, and Chroma screen support. But that’s not the only sweet fruit.

In fact, Filmora is equipped with many jaw-dropping features, including preset templates, auto beat sync, split-screen, speed ramping, motion tracking, keyframing, creative transitions, titles, filters, and much more. And the best part is, you can learn and understand Filmora in no time. That’s why the program is loved and supported by all types of users.

So does Filmora helps cut and trim AVI videos? Yes! It does if you follow these steps correctly.

Step 1: Download Filmora Video Editor

First, download Filmora Video Editor by choosing your operating system, as seen in the screenshot below.

Run the setup and let it finish without any pause or break.

Step 2: Import Your Video to Filmora Video Editor

Importing your AVI video is a very simple process. Just click on the “Film Clip” icon.

It will open a new window screen on your computer to select the video from the directory. Find the clip you want to import and cut. Use your mouse to select it and click the “Open” button.

The video will be loaded in the “Media” folder of Filmora. The clip’s thumbnail should be visible to assure you have done everything correctly.

If you can see that, let’s go to the next step.

Step 3: Drag and Drop Video to Filmora’s Timeline

Select the video in the media folder by clicking over it once. Now, without leaving the hold of the left button of your mouse, slide the video down to the track in the timeline.

After that, a message will pop up, asking about your preference for the project settings. It is recommended to choose the “Match to Media” option unless you’re an experienced video editor who knows how to play with the resolution and frame rates.

You will see the video on the timeline with its preview on the “Preview Screen” on the right side of the interface.

Step 4: Cutting Your Video in Filmora

Here comes the core step you have been waiting for. But before you go any further, you need to know about the “Playhead.”

Playhead is an orange-reddish marker you can find on the timeline.

It has an important role in cutting your videos.

So, move the playhead to your desired frame and click on the “scissor” icon to make the “starting” cut.

As soon as you do it, you will see that the single clip is now divided into two parts similar to this image.

The “Red” marked area in the above screenshot ensures a gap between the clips on the timeline. The “Yellow” arrows confirm two separate clips of the same video.

Place the two clips together as seen in this “Green” area.

And place the playhead anywhere on the clip. And click on the “scissor” icon once again to make the “ending” cut (second cut).

If done correctly, there should be three clips now of the same video, as you can observe in this screenshot.

Again, the “Red” area in the above photo indicates the gap, and the “Yellow” area ensures a third segment of the video.

Note: The gaps you can see in the divided clips are made intentionally for understanding. Practically, Filmora doesn’t move the clip or make gaps in between after you have made the cuts.

Keep in mind that there are three clips on the timeline. Now, if you want to remove the second clip from the video, you need to select that portion first by clicking on it.

Then, right-click on the mouse and choose “Cut” from the menu.

Within a semi-second, the selected portion will be removed from the timeline. And you will be able to see the remaining parts of the video. Now, pull the second clip using your mouse and place it at the end of the first clip without leaving a gap in between.

Then, click the “Play” button under the preview screen to see the results.

You can see in the above two screenshots that there’s a jump between the scenes due to cuts, confirming that video has been cut significantly.

Step 5: Trimming Your Video in Filmora

Remember that cutting and trimming in Filmora are two different things. Trimming allows you to remove a particular video part from visibility without deleting the portion.

So feel free to skip this step if you’re happy learning the cutting technique. But if you’re interested in trimming, here’s how you do it.

Take your mouse cursor at the beginning or end of the clip you want to trim. Keep holding the clip’s corner and slide the mouse back or front to trim the part

Note: Since the trim tool doesn’t delete the video, the final project based on trimming will be of a larger size. Therefore, it is advised to cut videos rather than trimming for fast rendering, better results, and small video size.

Step 6: Save Project and Export Your Cut/Trimmed AVI Video

Choose “Save Project” from the “File” menu.

Select the directory to save the project, rename the new video, and click the “Save” button.

Click on the “Export” button to save the video in AVI or any other video format of your choice on your computer.

Part 2: Top 3 Free AVI Video Cutter on Windows

As a Windows user, finding an excellent video cutter is relatively easy. However, not all software permits importing AVI videos. In the same way, some video trimmers come at a price. So if you really don’t want to pay and enjoy cutting your AVI files, try using these three video cutting tools.

Microsoft Photos (Windows 10)

Microsoft Photos or Photo App is a free photo viewer and editor with your Windows 10. It offers incredible photo editing and enhancement along with different tools for organizing and editing videos in a very friendly way. Likewise, you can create drawings over the videos and add 3D effects and background music to your clips.

You can also trim AVI videos with Microsoft Photos quickly. All you need to do is open your clip with the Photo App, choose the “Trim” option, select a portion of the video you want to trim, and go ahead.

That’s it!

Features

• Quick video trimming
• Cool text effects
• 3D library and effects
• It has a clear interface
• You can find and tag people’s faces
• The program has 15+ filters for editing
• Motion tracking option for drawing on videos
• Allows you to view and organize your files easily

Pros

• Microsoft Photos is free for Windows users
• It automatically creates albums
• The program has a touch-friendly interface
• You can integrate your OneDrive with the software

Cons

• Lacks before and after view
• Not included in older Windows versions
• It doesn’t support selective focus or panorama stitching

Handbrake

Handbrake is best-known for its video transcoding traits. Unlike typical video editors, this open-source tool includes limited options to rip Blu-rays and DVDs. Moreover, you can mix the 5.1 soundtracks and convert them to stereo to make the audio compatible with your TV speakers.

But the exciting thing about Handbrake is that you can use this software on your macOS 10.13 or later versions to cut AVI videos for free. However, it’s a bit technical process, as there’s no timeline to help you trim or make cuts on the clips directly with the help of your mouse.

You are required to mention a time range (seconds, minutes, or hours) to keep a specific part of the video while the software removes the non-ranged parts of the clip. For instance, you have a video of 10 seconds. You start the range from 5 seconds and end it at 10 seconds. So, the first four seconds of the video will be cut from the entire clip.

Features

• Video cutting, cropping, and resizing
• Low-quality and old video restoration
• Video conversion from any format to MKV or MP4

Pros

• Handbrake is free
• You can convert batch videos with ease
• It supports MAC, Windows, and Linux OS
• Allows you to import video files in all major formats
• The software comes with various video conversion presets

Cons

• Handbrake is not a user-friendly tool
• The video file output is limited to two formats (MKV and MP4) only

Gihosoft Video Cutter

Gihosoft is a clean, free, lossless video cutter on your Windows PC. It’s a simple tool that helps you cut video files into various output formats. So be it AVI, MPEG, or any other file, with Gihosoft, everything becomes handy.

Another fascinating fact about this software is that it allows you to cut videos in three simple steps without losing the quality. So right after installing the program, you simply need to import your file, choose the start and end time, and click the “Cut” button to remove the part of the video.

Features

• Fast video and audio cutting
• Easy drag and drop audio/video files
• It supports most audio and video formats

Pros

• Free for both Windows and MAC operating systems
• The cutter saves video in original quality

Cons

• It does not include basic video editing features

Part 3: Top 3 Free AVI Video Cutter on MAC

Are you looking for a great AVI video cutter for your MAC? Sadly, you have limited product choices as compared to Windows users. But to ensure you don’t waste time looking for a suitable tool, here’s a list of three AVI video cutting programs you can use on your Macintosh.

iMovie

The first and foremost recommended software for free video cutting on MAC is Apple’s own tool, iMovie . It is a built-in program that comes with your system, so there is no need to spend extra on a video editor. iMovie allows you to browse and import most video files, including AVI, right from your computer. Also, this tool is equipped with multiple functions, such as audio editing, video quality enhancement, and much more.

This MAC’s video editor is ideal for beginners. Many home users and small business owners find this tool extremely simple, as they don’t like to be confused with complex features. So, if you want to make cuts to your video clips, start working on iMovie. And within a few clicks, you can trim or cut your videos for free.

Features

• Video cutting and trimming
• Cropping and rotation
• Effects and transitions
• Built-in themes
• HD and 4K video support
• Movie sharing
• Audio adjustments
• Chroma screen controls
• Character tracking

Pros

• Free to use for MAC users
• Clean timeline
• One-click video cutting and trimming
• Easy-to-remember keyboard shortcuts
• Direct share projects to your social media, like YouTube

Cons

• It takes a lot of time to export videos
• iMovie needs high HDD storage space

VideoPad by NCH

VideoPad by NCH is a beginner-level video editor with all the basic features. The software is specifically designed for home movie makers. That is why VideoPad is easy to understand and use.

VideoPad is entirely free of cost for non-commercial purposes, but it has limited features. On the other hand, if you want to enjoy full traits, you can purchase the tool.

VideoPad supports video files, including AVI, WMV, MPEG, MOV, MP4, ASF, and XviD. Likewise, you can also burn movies to Blu-ray, DVD, HD-DVD, or CD. And most importantly, you can easily cut or trim AVI videos on your MAC, as the software is available on both MAC and Windows systems.

Features

• Audio tools
• Video rotation
• Video sharing
• Visual effects
• Video transitions
• 3D Video editing
• Color correction
• Overlays and texts
• Video optimization
• Great plugin support
• Direct video uploading
• Multiple video resolutions
• Video cutting and trimming
• Files exportation to various devices
• Stereoscopic conversion from 2D to 3D

Pros

• You can use the basic tools for free
• Allows 360-degree video production
• It supports a wide range of video formats
• Compatible with MAC and Windows computers

Cons

• The auto speech feature performs poorly
• The free version has annoying notifications

Xilisoft Video Cutter

Xilisoft Video Cutter is the simplest tool to cut videos on MAC. This software has a straightforward option to cut the clip after importing it to the timeline. The program is fast and has a user-friendly interface.

Moreover, you can polish your videos by merging multiple clips or increasing the video quality once you’re done with the cutting process. At the same time, this video cutter allows you to import all video formats, including XviD, DivX, MOV, FLV, MP4, MPEG-4/, MKV, MPEG, WMV, and AVI.

Features

• Video joining
• Support multiple output video formats, including HD

Pros

• Easy video cutting and merging
• It doesn’t require a large storage space
• Extremely uncomplicated interface
• Real-time preview to make better cuts
• Available on both MAC and Windows systems

Cons

• The trial version is free to use but limits you from enjoying extra features

Part 4: Top 3 Free AVI Video Cutter on Android

After capturing nice videos with your Android mobile phone, you may need to cut unnecessary scenes to make your clips look professional. While there are numerous Android cutters, not all support the AVI format. So below, you will find the 3 best AVI video cutters for Android, which are free to use.

Quick – Video Editor & Maker

Quick – Video Editor & Maker is a free video editor with PRO results. Many photographers and vloggers love using this app to cut clips immediately. Furthermore, the application offers a wide range of options to assure you don’t have to look to any other tool to rotate or compress video. Quick – Video Editor & Maker lets you import videos in all major formats, including AVI, MPEG, WMA, and more.

Features

• Video cutting, fading, and rotation
• Speed control tools
• Conversion from video to GIF

Pros

• Free app
• Simple interface

Cons

• Lack of updates
• Some users complain about app crash

Funimate Video Editor & Maker

If you want to make some professional-grade video edits quickly, you are welcome to download and use Funimate Video Editor & Maker on your Android device. It’s a free tool to cut videos. It has an easy procedure, and you can cut AVI videos in a few seconds.

Plus, you can use the app to add custom animations, effects, and many other exciting elements. You can share your makes on social media like TikTok, Instagram, and other platforms. Contrarily, the app itself is a community with millions of Funimate-users who share their creations daily. You can also join or watch videos from other creators to learn more about new techniques and trends in video editing.

Features

• Video trimming and splitting
• Animation and cropping
• Filters and AI effects
• Speed adjustment
• Keyframing and video merging

Pros

• Free Android application with several editing tools
• Easy trimming, splitting, and cropping
• Aspect ratio, border, and color customization
• Direct social media sharing

Cons

• Free users cannot use templates
• The free version stamps watermarks on each project

Part 5: Top 3 Free AVI Video Cutter on iPhone

No wonder iPhone’s camera captures high-quality videos. But the problem begins when there’s no free app to cut AVI videos. So if you’re recording great spots, but deep inside, you really want to remove some parts, then these 3 free AVI video cutters will work smoothly on your iPhone.

Cut, Trim, Split Video Editor

Download Cut, Trim, Split Video Editor on your iPhone to delete/cut unwanted portions of your video clips. The tool is also best for trimming iPhone-recorded clips without messing with the frames. Or, if you just want to split the video into multiple parts for your next WhatsApp status, this iPhone app can do that job for you.

The app supports multiple video file types, including MOV, MP4, AVI, MPEG, MPEG-2, and 3GPP

Features

• Easy trimming and cutting video clips
• Splitting big-sized videos into two smaller clips
• Import video from file-sharing platforms, like iCloud, using Wi-Fi

Pros

• Free app for fast video cutting and sharing
• Simple UI interface

Cons

• The free version shows advertisements

Splice - Video Editor & Maker

Splice is an extraordinary video editor that makes it easy to make fully customized and professional videos from your iPhone. The app is also best for video cutting. Besides, it has many interesting features, which you can use from your device.

Features

• Cutting, trimming, and cropping your videos
• Exposure, saturation, and exposure adjustment
• Slow and fast motion with speed ramping option
• Video masking and overlay
• Color correction and text overlays

Pros

• Free basic features, such as video cutting
• iTunes integration
• Supports AVI video input
• User-friendly application
• Access to the music library
• Quick and simple social sharing

Cons

• Output videos require high mobile storage space

Part 6: Top 3 Free AVI Video Cutter Online

Don’t want to install video cutters on your MAC, Windows, smartphone, or any other device? No problem! You can use online video cutters and trimmers to split, cut, or trim your clips for free.

However, the problem still exists in online tools, as not all web-based editors allow importing AVI files. So to save your time and energy, you can directly go to the following online AVI cutters to complete your tasks.

Kapwing

Kapwing is an online video editor best for casual creatives, such as Vloggers and YouTubers. You can use this web-based platform to cut your videos. Gladly, Kapwing supports all AVI incomings. You can upload your AVI video files to this platform and use its trim or split feature. To do that, you need to upload your AVI video and choose the “Trim” or “Split” tool to see the magic. Once done with the trimming process, you can explore Kapwing’s other incredible traits and apply them to your project.

Features

• Video splitting, trimming, and merging
• Audio capturing
• Speed adjustment
• Image and video library
• Text editing and overlay
• Auto-generated subtitles
• Several collaboration tools
• Video creation from scratch
• Templates, shapes, and emojis
• Simple drag-and-drop interface
• Video transitions, plugins, and elements

Pros

• Free online video trimmer
• User-friendly interface
• You can export 30-minutes long projects
• Allows you to export unlimited videos with a watermark
• One watermark-free video export is available each month

Cons

• Cannot export long videos with a free account
• Only 10 minutes transcription limit is available for free users
• You need to purchase a monthly or annual subscription to remove the watermark from multiple videos

Clideo

Clideo is not just a video cutter but an online solution to all your video editing problems. The tool is super popular, with 4 million+ users a month. And why not? This is one of those web-based platforms that allow AVI video files to be imported and exported without converting them into any other formats.

Nevertheless, if you’re only looking for video cutting options, this tool makes your life easy. Simply upload your video, and select the portion of it by setting start and end times. Choose whether you want to delete or extract the selected part from the clip, and hit the “Export” button.

And within a few moments, you can enjoy a trimmed video clip. And if you plan to be more creative, you can look for other Clideo features to make videos more fascinating.

Features

• Video combining and cutting
• Resize and crop clips
• Compress your videos
• Add text and subtitles
• Add music to your video files
• Filters and color correction tools
• Audio mute, cutting, and muting
• Video rotation, flipping, and speed adjustment

Pros

• Basic tools can be used for free
• Best for beginners and intermediate users
• Ideal for AVI videos and also supports other video formats

Cons

• You cannot use the free version regularly

Aspose

Aspose is a free web-based application to cut clips. You can use this tool on any operating system. It supports all major video file formats, including AVI, MKV, MOV, MP4, FLV, WMV, WEBM, and GIF. Additionally, you can use Aspose for various other reasons, such as audio extraction, video resizing, and more.

Features

• Video cutting and compressing
• Looping, rotation, and video merging
• Adding watermarks on videos
• Sound muting
• Speed change and audio addition

Pros

• Aspose is a free online tool
• It offers straightforward options to cut and edit videos

Cons

• No color correction option
• Slow video cutting process
• Lacks timeline and other valuable features

Part 7: Bottom Line

Tired of finding AVI cutters? Relax and try these top 16 AVI video cutters for Windows, MAC, iPhone, Android, and online. Almost all these tools are free to use and are extremely handy. On the other hand, if you want to cut and trim videos professionally, download Filmora and follow the step-by-step guide in this article for making clean cuts.

Part 8: FAQs

Q1. How do I trim an AVI video?

To trim an AVI video file, ensure that the software or tool you use supports AVI input. Generally, you need to upload or import a clip on the program, select the portion of the video, and apply the cut/trim feature to make it happen.

Q2. Which is the best online video cutter?

Kapwing and Clideo are the two best online video cutters you can use for free. Both web-based tools also allow you to cut your AVI videos.

Q3. Which is the best video cutter and joiner software?

Filmora, iMovie, and Kapwing are some of the best video cutters and joiner tools. These video editors are also free to use and come with different features.

Q4. How do I trim an AVI file in Windows 10?

Trimming an AVI video file in Windows 10 is very simple. Launch the Microsoft Photos (Photo App) application on your computer, add clip, and select the “Trim” tool to trim a specific video part.

Q5. How can I cut a video on my computer for free?

MAC and Windows users can download Filmora to cut videos for free. Filmora also offers a wide range of other features to make your clips exciting. Contrarily, Windows users can use the built-in Photo App in Windows 10 or download Gihosoft or Handbrake software to cut clips. Likewise, MAC users can download VideoPad, Xilisoft Video Cutter, or iMovie for free.

With the growing fame of video-sharing and social media applications like Twitter, Instagram, and TikTok, the demand for simple and fast video cutting and trimming tools has dramatically increased. Nowadays, you don’t have to play with complex video editing tools to produce high-quality videos.

Thanks to several user-friendly editing software to make things easy for everybody. However, finding the right programs to trim/cut videos is still challenging, especially in AVI format.

But, guess what? These top 16 AVI video cutters for Windows, MAC, Android, iPhone, and online will make video cutting and trimming fun, especially when you learn to do it using Filmora.

In this Article

Part 1: Best AVI Video Cutter to Trim/Cut AVI Video on Windows and MAC – Filmora Video Cutter [with steps}

Part 2: Top 3 Free AVI Video Cutter on Windows

Part 3: Top 3 Free AVI Video Cutter on MAC

Part 4: Top 3 Free AVI Video Cutter on Android

Part 5: Top 3 Free AVI Video Cutter on iPhone

Part 6: Top 3 Free AVI Video Cutter Online

Part 7: Bottom Line

Part 8: FAQs

Part 1: Best AVI Video Cutter to Trim/Cut AVI Video on Windows and MAC – Filmora Video Cutter [with steps]

Filmora by Wondershare is a star video editor with outstanding outcomes. Whether you have a MAC or Windows PC, you can download Filmora regardless of your operating system. The program best serves those who intend to make high-quality videos. The software provides editing support for all video formats, including AVI.

Although Filmora is an affordable editor with tons of audio and video editing options, you can still download the software for free and create projects if watermarks don’t bother you. Moreover, you can count this tool’s capabilities in cropping, resizing, and Chroma screen support. But that’s not the only sweet fruit.

In fact, Filmora is equipped with many jaw-dropping features, including preset templates, auto beat sync, split-screen, speed ramping, motion tracking, keyframing, creative transitions, titles, filters, and much more. And the best part is, you can learn and understand Filmora in no time. That’s why the program is loved and supported by all types of users.

So does Filmora helps cut and trim AVI videos? Yes! It does if you follow these steps correctly.

Step 1: Download Filmora Video Editor

First, download Filmora Video Editor by choosing your operating system, as seen in the screenshot below.

Run the setup and let it finish without any pause or break.

Step 2: Import Your Video to Filmora Video Editor

Importing your AVI video is a very simple process. Just click on the “Film Clip” icon.

It will open a new window screen on your computer to select the video from the directory. Find the clip you want to import and cut. Use your mouse to select it and click the “Open” button.

The video will be loaded in the “Media” folder of Filmora. The clip’s thumbnail should be visible to assure you have done everything correctly.

If you can see that, let’s go to the next step.

Step 3: Drag and Drop Video to Filmora’s Timeline

Select the video in the media folder by clicking over it once. Now, without leaving the hold of the left button of your mouse, slide the video down to the track in the timeline.

After that, a message will pop up, asking about your preference for the project settings. It is recommended to choose the “Match to Media” option unless you’re an experienced video editor who knows how to play with the resolution and frame rates.

You will see the video on the timeline with its preview on the “Preview Screen” on the right side of the interface.

Step 4: Cutting Your Video in Filmora

Here comes the core step you have been waiting for. But before you go any further, you need to know about the “Playhead.”

Playhead is an orange-reddish marker you can find on the timeline.

It has an important role in cutting your videos.

So, move the playhead to your desired frame and click on the “scissor” icon to make the “starting” cut.

As soon as you do it, you will see that the single clip is now divided into two parts similar to this image.

The “Red” marked area in the above screenshot ensures a gap between the clips on the timeline. The “Yellow” arrows confirm two separate clips of the same video.

Place the two clips together as seen in this “Green” area.

And place the playhead anywhere on the clip. And click on the “scissor” icon once again to make the “ending” cut (second cut).

If done correctly, there should be three clips now of the same video, as you can observe in this screenshot.

Again, the “Red” area in the above photo indicates the gap, and the “Yellow” area ensures a third segment of the video.

Note: The gaps you can see in the divided clips are made intentionally for understanding. Practically, Filmora doesn’t move the clip or make gaps in between after you have made the cuts.

Keep in mind that there are three clips on the timeline. Now, if you want to remove the second clip from the video, you need to select that portion first by clicking on it.

Then, right-click on the mouse and choose “Cut” from the menu.

Within a semi-second, the selected portion will be removed from the timeline. And you will be able to see the remaining parts of the video. Now, pull the second clip using your mouse and place it at the end of the first clip without leaving a gap in between.

Then, click the “Play” button under the preview screen to see the results.

You can see in the above two screenshots that there’s a jump between the scenes due to cuts, confirming that video has been cut significantly.

Step 5: Trimming Your Video in Filmora

Remember that cutting and trimming in Filmora are two different things. Trimming allows you to remove a particular video part from visibility without deleting the portion.

So feel free to skip this step if you’re happy learning the cutting technique. But if you’re interested in trimming, here’s how you do it.

Take your mouse cursor at the beginning or end of the clip you want to trim. Keep holding the clip’s corner and slide the mouse back or front to trim the part

Note: Since the trim tool doesn’t delete the video, the final project based on trimming will be of a larger size. Therefore, it is advised to cut videos rather than trimming for fast rendering, better results, and small video size.

Step 6: Save Project and Export Your Cut/Trimmed AVI Video

Choose “Save Project” from the “File” menu.

Select the directory to save the project, rename the new video, and click the “Save” button.

Click on the “Export” button to save the video in AVI or any other video format of your choice on your computer.

Part 2: Top 3 Free AVI Video Cutter on Windows

As a Windows user, finding an excellent video cutter is relatively easy. However, not all software permits importing AVI videos. In the same way, some video trimmers come at a price. So if you really don’t want to pay and enjoy cutting your AVI files, try using these three video cutting tools.

Microsoft Photos (Windows 10)

Microsoft Photos or Photo App is a free photo viewer and editor with your Windows 10. It offers incredible photo editing and enhancement along with different tools for organizing and editing videos in a very friendly way. Likewise, you can create drawings over the videos and add 3D effects and background music to your clips.

You can also trim AVI videos with Microsoft Photos quickly. All you need to do is open your clip with the Photo App, choose the “Trim” option, select a portion of the video you want to trim, and go ahead.

That’s it!

Features

• Quick video trimming
• Cool text effects
• 3D library and effects
• It has a clear interface
• You can find and tag people’s faces
• The program has 15+ filters for editing
• Motion tracking option for drawing on videos
• Allows you to view and organize your files easily

Pros

• Microsoft Photos is free for Windows users
• It automatically creates albums
• The program has a touch-friendly interface
• You can integrate your OneDrive with the software

Cons

• Lacks before and after view
• Not included in older Windows versions
• It doesn’t support selective focus or panorama stitching

Handbrake

Handbrake is best-known for its video transcoding traits. Unlike typical video editors, this open-source tool includes limited options to rip Blu-rays and DVDs. Moreover, you can mix the 5.1 soundtracks and convert them to stereo to make the audio compatible with your TV speakers.

But the exciting thing about Handbrake is that you can use this software on your macOS 10.13 or later versions to cut AVI videos for free. However, it’s a bit technical process, as there’s no timeline to help you trim or make cuts on the clips directly with the help of your mouse.

You are required to mention a time range (seconds, minutes, or hours) to keep a specific part of the video while the software removes the non-ranged parts of the clip. For instance, you have a video of 10 seconds. You start the range from 5 seconds and end it at 10 seconds. So, the first four seconds of the video will be cut from the entire clip.

Features

• Video cutting, cropping, and resizing
• Low-quality and old video restoration
• Video conversion from any format to MKV or MP4

Pros

• Handbrake is free
• You can convert batch videos with ease
• It supports MAC, Windows, and Linux OS
• Allows you to import video files in all major formats
• The software comes with various video conversion presets

Cons

• Handbrake is not a user-friendly tool
• The video file output is limited to two formats (MKV and MP4) only

Gihosoft Video Cutter

Gihosoft is a clean, free, lossless video cutter on your Windows PC. It’s a simple tool that helps you cut video files into various output formats. So be it AVI, MPEG, or any other file, with Gihosoft, everything becomes handy.

Another fascinating fact about this software is that it allows you to cut videos in three simple steps without losing the quality. So right after installing the program, you simply need to import your file, choose the start and end time, and click the “Cut” button to remove the part of the video.

Features

• Fast video and audio cutting
• Easy drag and drop audio/video files
• It supports most audio and video formats

Pros

• Free for both Windows and MAC operating systems
• The cutter saves video in original quality

Cons

• It does not include basic video editing features

Part 3: Top 3 Free AVI Video Cutter on MAC

Are you looking for a great AVI video cutter for your MAC? Sadly, you have limited product choices as compared to Windows users. But to ensure you don’t waste time looking for a suitable tool, here’s a list of three AVI video cutting programs you can use on your Macintosh.

iMovie

The first and foremost recommended software for free video cutting on MAC is Apple’s own tool, iMovie . It is a built-in program that comes with your system, so there is no need to spend extra on a video editor. iMovie allows you to browse and import most video files, including AVI, right from your computer. Also, this tool is equipped with multiple functions, such as audio editing, video quality enhancement, and much more.

This MAC’s video editor is ideal for beginners. Many home users and small business owners find this tool extremely simple, as they don’t like to be confused with complex features. So, if you want to make cuts to your video clips, start working on iMovie. And within a few clicks, you can trim or cut your videos for free.

Features

• Video cutting and trimming
• Cropping and rotation
• Effects and transitions
• Built-in themes
• HD and 4K video support
• Movie sharing
• Audio adjustments
• Chroma screen controls
• Character tracking

Pros

• Free to use for MAC users
• Clean timeline
• One-click video cutting and trimming
• Easy-to-remember keyboard shortcuts
• Direct share projects to your social media, like YouTube

Cons

• It takes a lot of time to export videos
• iMovie needs high HDD storage space

VideoPad by NCH

VideoPad by NCH is a beginner-level video editor with all the basic features. The software is specifically designed for home movie makers. That is why VideoPad is easy to understand and use.

VideoPad is entirely free of cost for non-commercial purposes, but it has limited features. On the other hand, if you want to enjoy full traits, you can purchase the tool.

VideoPad supports video files, including AVI, WMV, MPEG, MOV, MP4, ASF, and XviD. Likewise, you can also burn movies to Blu-ray, DVD, HD-DVD, or CD. And most importantly, you can easily cut or trim AVI videos on your MAC, as the software is available on both MAC and Windows systems.

Features

• Audio tools
• Video rotation
• Video sharing
• Visual effects
• Video transitions
• 3D Video editing
• Color correction
• Overlays and texts
• Video optimization
• Great plugin support
• Direct video uploading
• Multiple video resolutions
• Video cutting and trimming
• Files exportation to various devices
• Stereoscopic conversion from 2D to 3D

Pros

• You can use the basic tools for free
• Allows 360-degree video production
• It supports a wide range of video formats
• Compatible with MAC and Windows computers

Cons

• The auto speech feature performs poorly
• The free version has annoying notifications

Xilisoft Video Cutter

Xilisoft Video Cutter is the simplest tool to cut videos on MAC. This software has a straightforward option to cut the clip after importing it to the timeline. The program is fast and has a user-friendly interface.

Moreover, you can polish your videos by merging multiple clips or increasing the video quality once you’re done with the cutting process. At the same time, this video cutter allows you to import all video formats, including XviD, DivX, MOV, FLV, MP4, MPEG-4/, MKV, MPEG, WMV, and AVI.

Features

• Video joining
• Support multiple output video formats, including HD

Pros

• Easy video cutting and merging
• It doesn’t require a large storage space
• Extremely uncomplicated interface
• Real-time preview to make better cuts
• Available on both MAC and Windows systems

Cons

• The trial version is free to use but limits you from enjoying extra features

Part 4: Top 3 Free AVI Video Cutter on Android

After capturing nice videos with your Android mobile phone, you may need to cut unnecessary scenes to make your clips look professional. While there are numerous Android cutters, not all support the AVI format. So below, you will find the 3 best AVI video cutters for Android, which are free to use.

Quick – Video Editor & Maker

Quick – Video Editor & Maker is a free video editor with PRO results. Many photographers and vloggers love using this app to cut clips immediately. Furthermore, the application offers a wide range of options to assure you don’t have to look to any other tool to rotate or compress video. Quick – Video Editor & Maker lets you import videos in all major formats, including AVI, MPEG, WMA, and more.

Features

• Video cutting, fading, and rotation
• Speed control tools
• Conversion from video to GIF

Pros

• Free app
• Simple interface

Cons

• Lack of updates
• Some users complain about app crash

Funimate Video Editor & Maker

If you want to make some professional-grade video edits quickly, you are welcome to download and use Funimate Video Editor & Maker on your Android device. It’s a free tool to cut videos. It has an easy procedure, and you can cut AVI videos in a few seconds.

Plus, you can use the app to add custom animations, effects, and many other exciting elements. You can share your makes on social media like TikTok, Instagram, and other platforms. Contrarily, the app itself is a community with millions of Funimate-users who share their creations daily. You can also join or watch videos from other creators to learn more about new techniques and trends in video editing.

Features

• Video trimming and splitting
• Animation and cropping
• Filters and AI effects
• Speed adjustment
• Keyframing and video merging

Pros

• Free Android application with several editing tools
• Easy trimming, splitting, and cropping
• Aspect ratio, border, and color customization
• Direct social media sharing

Cons

• Free users cannot use templates
• The free version stamps watermarks on each project

Part 5: Top 3 Free AVI Video Cutter on iPhone

No wonder iPhone’s camera captures high-quality videos. But the problem begins when there’s no free app to cut AVI videos. So if you’re recording great spots, but deep inside, you really want to remove some parts, then these 3 free AVI video cutters will work smoothly on your iPhone.

Cut, Trim, Split Video Editor

Download Cut, Trim, Split Video Editor on your iPhone to delete/cut unwanted portions of your video clips. The tool is also best for trimming iPhone-recorded clips without messing with the frames. Or, if you just want to split the video into multiple parts for your next WhatsApp status, this iPhone app can do that job for you.

The app supports multiple video file types, including MOV, MP4, AVI, MPEG, MPEG-2, and 3GPP

Features

• Easy trimming and cutting video clips
• Splitting big-sized videos into two smaller clips
• Import video from file-sharing platforms, like iCloud, using Wi-Fi

Pros

• Free app for fast video cutting and sharing
• Simple UI interface

Cons

• The free version shows advertisements

Splice - Video Editor & Maker

Splice is an extraordinary video editor that makes it easy to make fully customized and professional videos from your iPhone. The app is also best for video cutting. Besides, it has many interesting features, which you can use from your device.

Features

• Cutting, trimming, and cropping your videos
• Exposure, saturation, and exposure adjustment
• Slow and fast motion with speed ramping option
• Video masking and overlay
• Color correction and text overlays

Pros

• Free basic features, such as video cutting
• iTunes integration
• Supports AVI video input
• User-friendly application
• Access to the music library
• Quick and simple social sharing

Cons

• Output videos require high mobile storage space

Part 6: Top 3 Free AVI Video Cutter Online

Don’t want to install video cutters on your MAC, Windows, smartphone, or any other device? No problem! You can use online video cutters and trimmers to split, cut, or trim your clips for free.

However, the problem still exists in online tools, as not all web-based editors allow importing AVI files. So to save your time and energy, you can directly go to the following online AVI cutters to complete your tasks.

Kapwing

Kapwing is an online video editor best for casual creatives, such as Vloggers and YouTubers. You can use this web-based platform to cut your videos. Gladly, Kapwing supports all AVI incomings. You can upload your AVI video files to this platform and use its trim or split feature. To do that, you need to upload your AVI video and choose the “Trim” or “Split” tool to see the magic. Once done with the trimming process, you can explore Kapwing’s other incredible traits and apply them to your project.

Features

• Video splitting, trimming, and merging
• Audio capturing
• Speed adjustment
• Image and video library
• Text editing and overlay
• Auto-generated subtitles
• Several collaboration tools
• Video creation from scratch
• Templates, shapes, and emojis
• Simple drag-and-drop interface
• Video transitions, plugins, and elements

Pros

• Free online video trimmer
• User-friendly interface
• You can export 30-minutes long projects
• Allows you to export unlimited videos with a watermark
• One watermark-free video export is available each month

Cons

• Cannot export long videos with a free account
• Only 10 minutes transcription limit is available for free users
• You need to purchase a monthly or annual subscription to remove the watermark from multiple videos

Clideo

Clideo is not just a video cutter but an online solution to all your video editing problems. The tool is super popular, with 4 million+ users a month. And why not? This is one of those web-based platforms that allow AVI video files to be imported and exported without converting them into any other formats.

Nevertheless, if you’re only looking for video cutting options, this tool makes your life easy. Simply upload your video, and select the portion of it by setting start and end times. Choose whether you want to delete or extract the selected part from the clip, and hit the “Export” button.

And within a few moments, you can enjoy a trimmed video clip. And if you plan to be more creative, you can look for other Clideo features to make videos more fascinating.

Features

• Video combining and cutting
• Resize and crop clips
• Compress your videos
• Add text and subtitles
• Add music to your video files
• Filters and color correction tools
• Audio mute, cutting, and muting
• Video rotation, flipping, and speed adjustment

Pros

• Basic tools can be used for free
• Best for beginners and intermediate users
• Ideal for AVI videos and also supports other video formats

Cons

• You cannot use the free version regularly

Aspose

Aspose is a free web-based application to cut clips. You can use this tool on any operating system. It supports all major video file formats, including AVI, MKV, MOV, MP4, FLV, WMV, WEBM, and GIF. Additionally, you can use Aspose for various other reasons, such as audio extraction, video resizing, and more.

Features

• Video cutting and compressing
• Looping, rotation, and video merging
• Adding watermarks on videos
• Sound muting
• Speed change and audio addition

Pros

• Aspose is a free online tool
• It offers straightforward options to cut and edit videos

Cons

• No color correction option
• Slow video cutting process
• Lacks timeline and other valuable features

Part 7: Bottom Line

Tired of finding AVI cutters? Relax and try these top 16 AVI video cutters for Windows, MAC, iPhone, Android, and online. Almost all these tools are free to use and are extremely handy. On the other hand, if you want to cut and trim videos professionally, download Filmora and follow the step-by-step guide in this article for making clean cuts.

Part 8: FAQs

Q1. How do I trim an AVI video?

To trim an AVI video file, ensure that the software or tool you use supports AVI input. Generally, you need to upload or import a clip on the program, select the portion of the video, and apply the cut/trim feature to make it happen.

Q2. Which is the best online video cutter?

Kapwing and Clideo are the two best online video cutters you can use for free. Both web-based tools also allow you to cut your AVI videos.

Q3. Which is the best video cutter and joiner software?

Filmora, iMovie, and Kapwing are some of the best video cutters and joiner tools. These video editors are also free to use and come with different features.

Q4. How do I trim an AVI file in Windows 10?

Trimming an AVI video file in Windows 10 is very simple. Launch the Microsoft Photos (Photo App) application on your computer, add clip, and select the “Trim” tool to trim a specific video part.

Q5. How can I cut a video on my computer for free?

MAC and Windows users can download Filmora to cut videos for free. Filmora also offers a wide range of other features to make your clips exciting. Contrarily, Windows users can use the built-in Photo App in Windows 10 or download Gihosoft or Handbrake software to cut clips. Likewise, MAC users can download VideoPad, Xilisoft Video Cutter, or iMovie for free.

With the growing fame of video-sharing and social media applications like Twitter, Instagram, and TikTok, the demand for simple and fast video cutting and trimming tools has dramatically increased. Nowadays, you don’t have to play with complex video editing tools to produce high-quality videos.

Thanks to several user-friendly editing software to make things easy for everybody. However, finding the right programs to trim/cut videos is still challenging, especially in AVI format.

But, guess what? These top 16 AVI video cutters for Windows, MAC, Android, iPhone, and online will make video cutting and trimming fun, especially when you learn to do it using Filmora.

In this Article

Part 1: Best AVI Video Cutter to Trim/Cut AVI Video on Windows and MAC – Filmora Video Cutter [with steps}

Part 2: Top 3 Free AVI Video Cutter on Windows

Part 3: Top 3 Free AVI Video Cutter on MAC

Part 4: Top 3 Free AVI Video Cutter on Android

Part 5: Top 3 Free AVI Video Cutter on iPhone

Part 6: Top 3 Free AVI Video Cutter Online

Part 7: Bottom Line

Part 8: FAQs

Part 1: Best AVI Video Cutter to Trim/Cut AVI Video on Windows and MAC – Filmora Video Cutter [with steps]

Filmora by Wondershare is a star video editor with outstanding outcomes. Whether you have a MAC or Windows PC, you can download Filmora regardless of your operating system. The program best serves those who intend to make high-quality videos. The software provides editing support for all video formats, including AVI.

Although Filmora is an affordable editor with tons of audio and video editing options, you can still download the software for free and create projects if watermarks don’t bother you. Moreover, you can count this tool’s capabilities in cropping, resizing, and Chroma screen support. But that’s not the only sweet fruit.

In fact, Filmora is equipped with many jaw-dropping features, including preset templates, auto beat sync, split-screen, speed ramping, motion tracking, keyframing, creative transitions, titles, filters, and much more. And the best part is, you can learn and understand Filmora in no time. That’s why the program is loved and supported by all types of users.

So does Filmora helps cut and trim AVI videos? Yes! It does if you follow these steps correctly.

Step 1: Download Filmora Video Editor

First, download Filmora Video Editor by choosing your operating system, as seen in the screenshot below.

Run the setup and let it finish without any pause or break.

Step 2: Import Your Video to Filmora Video Editor

Importing your AVI video is a very simple process. Just click on the “Film Clip” icon.

It will open a new window screen on your computer to select the video from the directory. Find the clip you want to import and cut. Use your mouse to select it and click the “Open” button.

The video will be loaded in the “Media” folder of Filmora. The clip’s thumbnail should be visible to assure you have done everything correctly.

If you can see that, let’s go to the next step.

Step 3: Drag and Drop Video to Filmora’s Timeline

Select the video in the media folder by clicking over it once. Now, without leaving the hold of the left button of your mouse, slide the video down to the track in the timeline.

After that, a message will pop up, asking about your preference for the project settings. It is recommended to choose the “Match to Media” option unless you’re an experienced video editor who knows how to play with the resolution and frame rates.

You will see the video on the timeline with its preview on the “Preview Screen” on the right side of the interface.

Step 4: Cutting Your Video in Filmora

Here comes the core step you have been waiting for. But before you go any further, you need to know about the “Playhead.”

Playhead is an orange-reddish marker you can find on the timeline.

It has an important role in cutting your videos.

So, move the playhead to your desired frame and click on the “scissor” icon to make the “starting” cut.

As soon as you do it, you will see that the single clip is now divided into two parts similar to this image.

The “Red” marked area in the above screenshot ensures a gap between the clips on the timeline. The “Yellow” arrows confirm two separate clips of the same video.

Place the two clips together as seen in this “Green” area.

And place the playhead anywhere on the clip. And click on the “scissor” icon once again to make the “ending” cut (second cut).

If done correctly, there should be three clips now of the same video, as you can observe in this screenshot.

Again, the “Red” area in the above photo indicates the gap, and the “Yellow” area ensures a third segment of the video.

Note: The gaps you can see in the divided clips are made intentionally for understanding. Practically, Filmora doesn’t move the clip or make gaps in between after you have made the cuts.

Keep in mind that there are three clips on the timeline. Now, if you want to remove the second clip from the video, you need to select that portion first by clicking on it.

Then, right-click on the mouse and choose “Cut” from the menu.

Within a semi-second, the selected portion will be removed from the timeline. And you will be able to see the remaining parts of the video. Now, pull the second clip using your mouse and place it at the end of the first clip without leaving a gap in between.

Then, click the “Play” button under the preview screen to see the results.

You can see in the above two screenshots that there’s a jump between the scenes due to cuts, confirming that video has been cut significantly.

Step 5: Trimming Your Video in Filmora

Remember that cutting and trimming in Filmora are two different things. Trimming allows you to remove a particular video part from visibility without deleting the portion.

So feel free to skip this step if you’re happy learning the cutting technique. But if you’re interested in trimming, here’s how you do it.

Take your mouse cursor at the beginning or end of the clip you want to trim. Keep holding the clip’s corner and slide the mouse back or front to trim the part

Note: Since the trim tool doesn’t delete the video, the final project based on trimming will be of a larger size. Therefore, it is advised to cut videos rather than trimming for fast rendering, better results, and small video size.

Step 6: Save Project and Export Your Cut/Trimmed AVI Video

Choose “Save Project” from the “File” menu.

Select the directory to save the project, rename the new video, and click the “Save” button.

Click on the “Export” button to save the video in AVI or any other video format of your choice on your computer.

Part 2: Top 3 Free AVI Video Cutter on Windows

As a Windows user, finding an excellent video cutter is relatively easy. However, not all software permits importing AVI videos. In the same way, some video trimmers come at a price. So if you really don’t want to pay and enjoy cutting your AVI files, try using these three video cutting tools.

Microsoft Photos (Windows 10)

Microsoft Photos or Photo App is a free photo viewer and editor with your Windows 10. It offers incredible photo editing and enhancement along with different tools for organizing and editing videos in a very friendly way. Likewise, you can create drawings over the videos and add 3D effects and background music to your clips.

You can also trim AVI videos with Microsoft Photos quickly. All you need to do is open your clip with the Photo App, choose the “Trim” option, select a portion of the video you want to trim, and go ahead.

That’s it!

Features

• Quick video trimming
• Cool text effects
• 3D library and effects
• It has a clear interface
• You can find and tag people’s faces
• The program has 15+ filters for editing
• Motion tracking option for drawing on videos
• Allows you to view and organize your files easily

Pros

• Microsoft Photos is free for Windows users
• It automatically creates albums
• The program has a touch-friendly interface
• You can integrate your OneDrive with the software

Cons

• Lacks before and after view
• Not included in older Windows versions
• It doesn’t support selective focus or panorama stitching

Handbrake

Handbrake is best-known for its video transcoding traits. Unlike typical video editors, this open-source tool includes limited options to rip Blu-rays and DVDs. Moreover, you can mix the 5.1 soundtracks and convert them to stereo to make the audio compatible with your TV speakers.

But the exciting thing about Handbrake is that you can use this software on your macOS 10.13 or later versions to cut AVI videos for free. However, it’s a bit technical process, as there’s no timeline to help you trim or make cuts on the clips directly with the help of your mouse.

You are required to mention a time range (seconds, minutes, or hours) to keep a specific part of the video while the software removes the non-ranged parts of the clip. For instance, you have a video of 10 seconds. You start the range from 5 seconds and end it at 10 seconds. So, the first four seconds of the video will be cut from the entire clip.

Features

• Video cutting, cropping, and resizing
• Low-quality and old video restoration
• Video conversion from any format to MKV or MP4

Pros

• Handbrake is free
• You can convert batch videos with ease
• It supports MAC, Windows, and Linux OS
• Allows you to import video files in all major formats
• The software comes with various video conversion presets

Cons

• Handbrake is not a user-friendly tool
• The video file output is limited to two formats (MKV and MP4) only

Gihosoft Video Cutter

Gihosoft is a clean, free, lossless video cutter on your Windows PC. It’s a simple tool that helps you cut video files into various output formats. So be it AVI, MPEG, or any other file, with Gihosoft, everything becomes handy.

Another fascinating fact about this software is that it allows you to cut videos in three simple steps without losing the quality. So right after installing the program, you simply need to import your file, choose the start and end time, and click the “Cut” button to remove the part of the video.

Features

• Fast video and audio cutting
• Easy drag and drop audio/video files
• It supports most audio and video formats

Pros

• Free for both Windows and MAC operating systems
• The cutter saves video in original quality

Cons

• It does not include basic video editing features

Part 3: Top 3 Free AVI Video Cutter on MAC

Are you looking for a great AVI video cutter for your MAC? Sadly, you have limited product choices as compared to Windows users. But to ensure you don’t waste time looking for a suitable tool, here’s a list of three AVI video cutting programs you can use on your Macintosh.

iMovie

The first and foremost recommended software for free video cutting on MAC is Apple’s own tool, iMovie . It is a built-in program that comes with your system, so there is no need to spend extra on a video editor. iMovie allows you to browse and import most video files, including AVI, right from your computer. Also, this tool is equipped with multiple functions, such as audio editing, video quality enhancement, and much more.

This MAC’s video editor is ideal for beginners. Many home users and small business owners find this tool extremely simple, as they don’t like to be confused with complex features. So, if you want to make cuts to your video clips, start working on iMovie. And within a few clicks, you can trim or cut your videos for free.

Features

• Video cutting and trimming
• Cropping and rotation
• Effects and transitions
• Built-in themes
• HD and 4K video support
• Movie sharing
• Audio adjustments
• Chroma screen controls
• Character tracking

Pros

• Free to use for MAC users
• Clean timeline
• One-click video cutting and trimming
• Easy-to-remember keyboard shortcuts
• Direct share projects to your social media, like YouTube

Cons

• It takes a lot of time to export videos
• iMovie needs high HDD storage space

VideoPad by NCH

VideoPad by NCH is a beginner-level video editor with all the basic features. The software is specifically designed for home movie makers. That is why VideoPad is easy to understand and use.

VideoPad is entirely free of cost for non-commercial purposes, but it has limited features. On the other hand, if you want to enjoy full traits, you can purchase the tool.

VideoPad supports video files, including AVI, WMV, MPEG, MOV, MP4, ASF, and XviD. Likewise, you can also burn movies to Blu-ray, DVD, HD-DVD, or CD. And most importantly, you can easily cut or trim AVI videos on your MAC, as the software is available on both MAC and Windows systems.

Features

• Audio tools
• Video rotation
• Video sharing
• Visual effects
• Video transitions
• 3D Video editing
• Color correction
• Overlays and texts
• Video optimization
• Great plugin support
• Direct video uploading
• Multiple video resolutions
• Video cutting and trimming
• Files exportation to various devices
• Stereoscopic conversion from 2D to 3D

Pros

• You can use the basic tools for free
• Allows 360-degree video production
• It supports a wide range of video formats
• Compatible with MAC and Windows computers

Cons

• The auto speech feature performs poorly
• The free version has annoying notifications

Xilisoft Video Cutter

Xilisoft Video Cutter is the simplest tool to cut videos on MAC. This software has a straightforward option to cut the clip after importing it to the timeline. The program is fast and has a user-friendly interface.

Moreover, you can polish your videos by merging multiple clips or increasing the video quality once you’re done with the cutting process. At the same time, this video cutter allows you to import all video formats, including XviD, DivX, MOV, FLV, MP4, MPEG-4/, MKV, MPEG, WMV, and AVI.

Features

• Video joining
• Support multiple output video formats, including HD

Pros

• Easy video cutting and merging
• It doesn’t require a large storage space
• Extremely uncomplicated interface
• Real-time preview to make better cuts
• Available on both MAC and Windows systems

Cons

• The trial version is free to use but limits you from enjoying extra features

Part 4: Top 3 Free AVI Video Cutter on Android

After capturing nice videos with your Android mobile phone, you may need to cut unnecessary scenes to make your clips look professional. While there are numerous Android cutters, not all support the AVI format. So below, you will find the 3 best AVI video cutters for Android, which are free to use.

Quick – Video Editor & Maker

Quick – Video Editor & Maker is a free video editor with PRO results. Many photographers and vloggers love using this app to cut clips immediately. Furthermore, the application offers a wide range of options to assure you don’t have to look to any other tool to rotate or compress video. Quick – Video Editor & Maker lets you import videos in all major formats, including AVI, MPEG, WMA, and more.

Features

• Video cutting, fading, and rotation
• Speed control tools
• Conversion from video to GIF

Pros

• Free app
• Simple interface

Cons

• Lack of updates
• Some users complain about app crash

Funimate Video Editor & Maker

If you want to make some professional-grade video edits quickly, you are welcome to download and use Funimate Video Editor & Maker on your Android device. It’s a free tool to cut videos. It has an easy procedure, and you can cut AVI videos in a few seconds.

Plus, you can use the app to add custom animations, effects, and many other exciting elements. You can share your makes on social media like TikTok, Instagram, and other platforms. Contrarily, the app itself is a community with millions of Funimate-users who share their creations daily. You can also join or watch videos from other creators to learn more about new techniques and trends in video editing.

Features

• Video trimming and splitting
• Animation and cropping
• Filters and AI effects
• Speed adjustment
• Keyframing and video merging

Pros

• Free Android application with several editing tools
• Easy trimming, splitting, and cropping
• Aspect ratio, border, and color customization
• Direct social media sharing

Cons

• Free users cannot use templates
• The free version stamps watermarks on each project

Part 5: Top 3 Free AVI Video Cutter on iPhone

No wonder iPhone’s camera captures high-quality videos. But the problem begins when there’s no free app to cut AVI videos. So if you’re recording great spots, but deep inside, you really want to remove some parts, then these 3 free AVI video cutters will work smoothly on your iPhone.

Cut, Trim, Split Video Editor

Download Cut, Trim, Split Video Editor on your iPhone to delete/cut unwanted portions of your video clips. The tool is also best for trimming iPhone-recorded clips without messing with the frames. Or, if you just want to split the video into multiple parts for your next WhatsApp status, this iPhone app can do that job for you.

The app supports multiple video file types, including MOV, MP4, AVI, MPEG, MPEG-2, and 3GPP

Features

• Easy trimming and cutting video clips
• Splitting big-sized videos into two smaller clips
• Import video from file-sharing platforms, like iCloud, using Wi-Fi

Pros

• Free app for fast video cutting and sharing
• Simple UI interface

Cons

• The free version shows advertisements

Splice - Video Editor & Maker

Splice is an extraordinary video editor that makes it easy to make fully customized and professional videos from your iPhone. The app is also best for video cutting. Besides, it has many interesting features, which you can use from your device.

Features

• Cutting, trimming, and cropping your videos
• Exposure, saturation, and exposure adjustment
• Slow and fast motion with speed ramping option
• Video masking and overlay
• Color correction and text overlays

Pros

• Free basic features, such as video cutting
• iTunes integration
• Supports AVI video input
• User-friendly application
• Access to the music library
• Quick and simple social sharing

Cons

• Output videos require high mobile storage space

Part 6: Top 3 Free AVI Video Cutter Online

Don’t want to install video cutters on your MAC, Windows, smartphone, or any other device? No problem! You can use online video cutters and trimmers to split, cut, or trim your clips for free.

However, the problem still exists in online tools, as not all web-based editors allow importing AVI files. So to save your time and energy, you can directly go to the following online AVI cutters to complete your tasks.

Kapwing

Kapwing is an online video editor best for casual creatives, such as Vloggers and YouTubers. You can use this web-based platform to cut your videos. Gladly, Kapwing supports all AVI incomings. You can upload your AVI video files to this platform and use its trim or split feature. To do that, you need to upload your AVI video and choose the “Trim” or “Split” tool to see the magic. Once done with the trimming process, you can explore Kapwing’s other incredible traits and apply them to your project.

Features

• Video splitting, trimming, and merging
• Audio capturing
• Speed adjustment
• Image and video library
• Text editing and overlay
• Auto-generated subtitles
• Several collaboration tools
• Video creation from scratch
• Templates, shapes, and emojis
• Simple drag-and-drop interface
• Video transitions, plugins, and elements

Pros

• Free online video trimmer
• User-friendly interface
• You can export 30-minutes long projects
• Allows you to export unlimited videos with a watermark
• One watermark-free video export is available each month

Cons

• Cannot export long videos with a free account
• Only 10 minutes transcription limit is available for free users
• You need to purchase a monthly or annual subscription to remove the watermark from multiple videos

Clideo

Clideo is not just a video cutter but an online solution to all your video editing problems. The tool is super popular, with 4 million+ users a month. And why not? This is one of those web-based platforms that allow AVI video files to be imported and exported without converting them into any other formats.

Nevertheless, if you’re only looking for video cutting options, this tool makes your life easy. Simply upload your video, and select the portion of it by setting start and end times. Choose whether you want to delete or extract the selected part from the clip, and hit the “Export” button.

And within a few moments, you can enjoy a trimmed video clip. And if you plan to be more creative, you can look for other Clideo features to make videos more fascinating.

Features

• Video combining and cutting
• Resize and crop clips
• Compress your videos
• Add text and subtitles
• Add music to your video files
• Filters and color correction tools
• Audio mute, cutting, and muting
• Video rotation, flipping, and speed adjustment

Pros

• Basic tools can be used for free
• Best for beginners and intermediate users
• Ideal for AVI videos and also supports other video formats

Cons

• You cannot use the free version regularly

Aspose

Aspose is a free web-based application to cut clips. You can use this tool on any operating system. It supports all major video file formats, including AVI, MKV, MOV, MP4, FLV, WMV, WEBM, and GIF. Additionally, you can use Aspose for various other reasons, such as audio extraction, video resizing, and more.

Features

• Video cutting and compressing
• Looping, rotation, and video merging
• Adding watermarks on videos
• Sound muting
• Speed change and audio addition

Pros

• Aspose is a free online tool
• It offers straightforward options to cut and edit videos

Cons

• No color correction option
• Slow video cutting process
• Lacks timeline and other valuable features

Part 7: Bottom Line

Tired of finding AVI cutters? Relax and try these top 16 AVI video cutters for Windows, MAC, iPhone, Android, and online. Almost all these tools are free to use and are extremely handy. On the other hand, if you want to cut and trim videos professionally, download Filmora and follow the step-by-step guide in this article for making clean cuts.

Part 8: FAQs

Q1. How do I trim an AVI video?

To trim an AVI video file, ensure that the software or tool you use supports AVI input. Generally, you need to upload or import a clip on the program, select the portion of the video, and apply the cut/trim feature to make it happen.

Q2. Which is the best online video cutter?

Kapwing and Clideo are the two best online video cutters you can use for free. Both web-based tools also allow you to cut your AVI videos.

Q3. Which is the best video cutter and joiner software?

Filmora, iMovie, and Kapwing are some of the best video cutters and joiner tools. These video editors are also free to use and come with different features.

Q4. How do I trim an AVI file in Windows 10?

Trimming an AVI video file in Windows 10 is very simple. Launch the Microsoft Photos (Photo App) application on your computer, add clip, and select the “Trim” tool to trim a specific video part.

Q5. How can I cut a video on my computer for free?

MAC and Windows users can download Filmora to cut videos for free. Filmora also offers a wide range of other features to make your clips exciting. Contrarily, Windows users can use the built-in Photo App in Windows 10 or download Gihosoft or Handbrake software to cut clips. Likewise, MAC users can download VideoPad, Xilisoft Video Cutter, or iMovie for free.

With the growing fame of video-sharing and social media applications like Twitter, Instagram, and TikTok, the demand for simple and fast video cutting and trimming tools has dramatically increased. Nowadays, you don’t have to play with complex video editing tools to produce high-quality videos.

Thanks to several user-friendly editing software to make things easy for everybody. However, finding the right programs to trim/cut videos is still challenging, especially in AVI format.

But, guess what? These top 16 AVI video cutters for Windows, MAC, Android, iPhone, and online will make video cutting and trimming fun, especially when you learn to do it using Filmora.

In this Article

Part 1: Best AVI Video Cutter to Trim/Cut AVI Video on Windows and MAC – Filmora Video Cutter [with steps}

Part 2: Top 3 Free AVI Video Cutter on Windows

Part 3: Top 3 Free AVI Video Cutter on MAC

Part 4: Top 3 Free AVI Video Cutter on Android

Part 5: Top 3 Free AVI Video Cutter on iPhone

Part 6: Top 3 Free AVI Video Cutter Online

Part 7: Bottom Line

Part 8: FAQs

Part 1: Best AVI Video Cutter to Trim/Cut AVI Video on Windows and MAC – Filmora Video Cutter [with steps]

Filmora by Wondershare is a star video editor with outstanding outcomes. Whether you have a MAC or Windows PC, you can download Filmora regardless of your operating system. The program best serves those who intend to make high-quality videos. The software provides editing support for all video formats, including AVI.

Although Filmora is an affordable editor with tons of audio and video editing options, you can still download the software for free and create projects if watermarks don’t bother you. Moreover, you can count this tool’s capabilities in cropping, resizing, and Chroma screen support. But that’s not the only sweet fruit.

In fact, Filmora is equipped with many jaw-dropping features, including preset templates, auto beat sync, split-screen, speed ramping, motion tracking, keyframing, creative transitions, titles, filters, and much more. And the best part is, you can learn and understand Filmora in no time. That’s why the program is loved and supported by all types of users.

So does Filmora helps cut and trim AVI videos? Yes! It does if you follow these steps correctly.

Step 1: Download Filmora Video Editor

First, download Filmora Video Editor by choosing your operating system, as seen in the screenshot below.

Run the setup and let it finish without any pause or break.

Step 2: Import Your Video to Filmora Video Editor

Importing your AVI video is a very simple process. Just click on the “Film Clip” icon.

It will open a new window screen on your computer to select the video from the directory. Find the clip you want to import and cut. Use your mouse to select it and click the “Open” button.

The video will be loaded in the “Media” folder of Filmora. The clip’s thumbnail should be visible to assure you have done everything correctly.

If you can see that, let’s go to the next step.

Step 3: Drag and Drop Video to Filmora’s Timeline

Select the video in the media folder by clicking over it once. Now, without leaving the hold of the left button of your mouse, slide the video down to the track in the timeline.

After that, a message will pop up, asking about your preference for the project settings. It is recommended to choose the “Match to Media” option unless you’re an experienced video editor who knows how to play with the resolution and frame rates.

You will see the video on the timeline with its preview on the “Preview Screen” on the right side of the interface.

Step 4: Cutting Your Video in Filmora

Here comes the core step you have been waiting for. But before you go any further, you need to know about the “Playhead.”

Playhead is an orange-reddish marker you can find on the timeline.

It has an important role in cutting your videos.

So, move the playhead to your desired frame and click on the “scissor” icon to make the “starting” cut.

As soon as you do it, you will see that the single clip is now divided into two parts similar to this image.

The “Red” marked area in the above screenshot ensures a gap between the clips on the timeline. The “Yellow” arrows confirm two separate clips of the same video.

Place the two clips together as seen in this “Green” area.

And place the playhead anywhere on the clip. And click on the “scissor” icon once again to make the “ending” cut (second cut).

If done correctly, there should be three clips now of the same video, as you can observe in this screenshot.

Again, the “Red” area in the above photo indicates the gap, and the “Yellow” area ensures a third segment of the video.

Note: The gaps you can see in the divided clips are made intentionally for understanding. Practically, Filmora doesn’t move the clip or make gaps in between after you have made the cuts.

Keep in mind that there are three clips on the timeline. Now, if you want to remove the second clip from the video, you need to select that portion first by clicking on it.

Then, right-click on the mouse and choose “Cut” from the menu.

Within a semi-second, the selected portion will be removed from the timeline. And you will be able to see the remaining parts of the video. Now, pull the second clip using your mouse and place it at the end of the first clip without leaving a gap in between.

Then, click the “Play” button under the preview screen to see the results.

You can see in the above two screenshots that there’s a jump between the scenes due to cuts, confirming that video has been cut significantly.

Step 5: Trimming Your Video in Filmora

Remember that cutting and trimming in Filmora are two different things. Trimming allows you to remove a particular video part from visibility without deleting the portion.

So feel free to skip this step if you’re happy learning the cutting technique. But if you’re interested in trimming, here’s how you do it.

Take your mouse cursor at the beginning or end of the clip you want to trim. Keep holding the clip’s corner and slide the mouse back or front to trim the part

Note: Since the trim tool doesn’t delete the video, the final project based on trimming will be of a larger size. Therefore, it is advised to cut videos rather than trimming for fast rendering, better results, and small video size.

Step 6: Save Project and Export Your Cut/Trimmed AVI Video

Choose “Save Project” from the “File” menu.

Select the directory to save the project, rename the new video, and click the “Save” button.

Click on the “Export” button to save the video in AVI or any other video format of your choice on your computer.

Part 2: Top 3 Free AVI Video Cutter on Windows

As a Windows user, finding an excellent video cutter is relatively easy. However, not all software permits importing AVI videos. In the same way, some video trimmers come at a price. So if you really don’t want to pay and enjoy cutting your AVI files, try using these three video cutting tools.

Microsoft Photos (Windows 10)

Microsoft Photos or Photo App is a free photo viewer and editor with your Windows 10. It offers incredible photo editing and enhancement along with different tools for organizing and editing videos in a very friendly way. Likewise, you can create drawings over the videos and add 3D effects and background music to your clips.

You can also trim AVI videos with Microsoft Photos quickly. All you need to do is open your clip with the Photo App, choose the “Trim” option, select a portion of the video you want to trim, and go ahead.

That’s it!

Features

• Quick video trimming
• Cool text effects
• 3D library and effects
• It has a clear interface
• You can find and tag people’s faces
• The program has 15+ filters for editing
• Motion tracking option for drawing on videos
• Allows you to view and organize your files easily

Pros

• Microsoft Photos is free for Windows users
• It automatically creates albums
• The program has a touch-friendly interface
• You can integrate your OneDrive with the software

Cons

• Lacks before and after view
• Not included in older Windows versions
• It doesn’t support selective focus or panorama stitching

Handbrake

Handbrake is best-known for its video transcoding traits. Unlike typical video editors, this open-source tool includes limited options to rip Blu-rays and DVDs. Moreover, you can mix the 5.1 soundtracks and convert them to stereo to make the audio compatible with your TV speakers.

But the exciting thing about Handbrake is that you can use this software on your macOS 10.13 or later versions to cut AVI videos for free. However, it’s a bit technical process, as there’s no timeline to help you trim or make cuts on the clips directly with the help of your mouse.

You are required to mention a time range (seconds, minutes, or hours) to keep a specific part of the video while the software removes the non-ranged parts of the clip. For instance, you have a video of 10 seconds. You start the range from 5 seconds and end it at 10 seconds. So, the first four seconds of the video will be cut from the entire clip.

Features

• Video cutting, cropping, and resizing
• Low-quality and old video restoration
• Video conversion from any format to MKV or MP4

Pros

• Handbrake is free
• You can convert batch videos with ease
• It supports MAC, Windows, and Linux OS
• Allows you to import video files in all major formats
• The software comes with various video conversion presets

Cons

• Handbrake is not a user-friendly tool
• The video file output is limited to two formats (MKV and MP4) only

Gihosoft Video Cutter

Gihosoft is a clean, free, lossless video cutter on your Windows PC. It’s a simple tool that helps you cut video files into various output formats. So be it AVI, MPEG, or any other file, with Gihosoft, everything becomes handy.

Another fascinating fact about this software is that it allows you to cut videos in three simple steps without losing the quality. So right after installing the program, you simply need to import your file, choose the start and end time, and click the “Cut” button to remove the part of the video.

Features

• Fast video and audio cutting
• Easy drag and drop audio/video files
• It supports most audio and video formats

Pros

• Free for both Windows and MAC operating systems
• The cutter saves video in original quality

Cons

• It does not include basic video editing features

Part 3: Top 3 Free AVI Video Cutter on MAC

Are you looking for a great AVI video cutter for your MAC? Sadly, you have limited product choices as compared to Windows users. But to ensure you don’t waste time looking for a suitable tool, here’s a list of three AVI video cutting programs you can use on your Macintosh.

iMovie

The first and foremost recommended software for free video cutting on MAC is Apple’s own tool, iMovie . It is a built-in program that comes with your system, so there is no need to spend extra on a video editor. iMovie allows you to browse and import most video files, including AVI, right from your computer. Also, this tool is equipped with multiple functions, such as audio editing, video quality enhancement, and much more.

This MAC’s video editor is ideal for beginners. Many home users and small business owners find this tool extremely simple, as they don’t like to be confused with complex features. So, if you want to make cuts to your video clips, start working on iMovie. And within a few clicks, you can trim or cut your videos for free.

Features

• Video cutting and trimming
• Cropping and rotation
• Effects and transitions
• Built-in themes
• HD and 4K video support
• Movie sharing
• Audio adjustments
• Chroma screen controls
• Character tracking

Pros

• Free to use for MAC users
• Clean timeline
• One-click video cutting and trimming
• Easy-to-remember keyboard shortcuts
• Direct share projects to your social media, like YouTube

Cons

• It takes a lot of time to export videos
• iMovie needs high HDD storage space

VideoPad by NCH

VideoPad by NCH is a beginner-level video editor with all the basic features. The software is specifically designed for home movie makers. That is why VideoPad is easy to understand and use.

VideoPad is entirely free of cost for non-commercial purposes, but it has limited features. On the other hand, if you want to enjoy full traits, you can purchase the tool.

VideoPad supports video files, including AVI, WMV, MPEG, MOV, MP4, ASF, and XviD. Likewise, you can also burn movies to Blu-ray, DVD, HD-DVD, or CD. And most importantly, you can easily cut or trim AVI videos on your MAC, as the software is available on both MAC and Windows systems.

Features

• Audio tools
• Video rotation
• Video sharing
• Visual effects
• Video transitions
• 3D Video editing
• Color correction
• Overlays and texts
• Video optimization
• Great plugin support
• Direct video uploading
• Multiple video resolutions
• Video cutting and trimming
• Files exportation to various devices
• Stereoscopic conversion from 2D to 3D

Pros

• You can use the basic tools for free
• Allows 360-degree video production
• It supports a wide range of video formats
• Compatible with MAC and Windows computers

Cons

• The auto speech feature performs poorly
• The free version has annoying notifications

Xilisoft Video Cutter

Xilisoft Video Cutter is the simplest tool to cut videos on MAC. This software has a straightforward option to cut the clip after importing it to the timeline. The program is fast and has a user-friendly interface.

Moreover, you can polish your videos by merging multiple clips or increasing the video quality once you’re done with the cutting process. At the same time, this video cutter allows you to import all video formats, including XviD, DivX, MOV, FLV, MP4, MPEG-4/, MKV, MPEG, WMV, and AVI.

Features

• Video joining
• Support multiple output video formats, including HD

Pros

• Easy video cutting and merging
• It doesn’t require a large storage space
• Extremely uncomplicated interface
• Real-time preview to make better cuts
• Available on both MAC and Windows systems

Cons

• The trial version is free to use but limits you from enjoying extra features

Part 4: Top 3 Free AVI Video Cutter on Android

After capturing nice videos with your Android mobile phone, you may need to cut unnecessary scenes to make your clips look professional. While there are numerous Android cutters, not all support the AVI format. So below, you will find the 3 best AVI video cutters for Android, which are free to use.

Quick – Video Editor & Maker

Quick – Video Editor & Maker is a free video editor with PRO results. Many photographers and vloggers love using this app to cut clips immediately. Furthermore, the application offers a wide range of options to assure you don’t have to look to any other tool to rotate or compress video. Quick – Video Editor & Maker lets you import videos in all major formats, including AVI, MPEG, WMA, and more.

Features

• Video cutting, fading, and rotation
• Speed control tools
• Conversion from video to GIF

Pros

• Free app
• Simple interface

Cons

• Lack of updates
• Some users complain about app crash

Funimate Video Editor & Maker

If you want to make some professional-grade video edits quickly, you are welcome to download and use Funimate Video Editor & Maker on your Android device. It’s a free tool to cut videos. It has an easy procedure, and you can cut AVI videos in a few seconds.

Plus, you can use the app to add custom animations, effects, and many other exciting elements. You can share your makes on social media like TikTok, Instagram, and other platforms. Contrarily, the app itself is a community with millions of Funimate-users who share their creations daily. You can also join or watch videos from other creators to learn more about new techniques and trends in video editing.

Features

• Video trimming and splitting
• Animation and cropping
• Filters and AI effects
• Speed adjustment
• Keyframing and video merging

Pros

• Free Android application with several editing tools
• Easy trimming, splitting, and cropping
• Aspect ratio, border, and color customization
• Direct social media sharing

Cons

• Free users cannot use templates
• The free version stamps watermarks on each project

Part 5: Top 3 Free AVI Video Cutter on iPhone

No wonder iPhone’s camera captures high-quality videos. But the problem begins when there’s no free app to cut AVI videos. So if you’re recording great spots, but deep inside, you really want to remove some parts, then these 3 free AVI video cutters will work smoothly on your iPhone.

Cut, Trim, Split Video Editor

Download Cut, Trim, Split Video Editor on your iPhone to delete/cut unwanted portions of your video clips. The tool is also best for trimming iPhone-recorded clips without messing with the frames. Or, if you just want to split the video into multiple parts for your next WhatsApp status, this iPhone app can do that job for you.

The app supports multiple video file types, including MOV, MP4, AVI, MPEG, MPEG-2, and 3GPP

Features

• Easy trimming and cutting video clips
• Splitting big-sized videos into two smaller clips
• Import video from file-sharing platforms, like iCloud, using Wi-Fi

Pros

• Free app for fast video cutting and sharing
• Simple UI interface

Cons

• The free version shows advertisements

Splice - Video Editor & Maker

Splice is an extraordinary video editor that makes it easy to make fully customized and professional videos from your iPhone. The app is also best for video cutting. Besides, it has many interesting features, which you can use from your device.

Features

• Cutting, trimming, and cropping your videos
• Exposure, saturation, and exposure adjustment
• Slow and fast motion with speed ramping option
• Video masking and overlay
• Color correction and text overlays

Pros

• Free basic features, such as video cutting
• iTunes integration
• Supports AVI video input
• User-friendly application
• Access to the music library
• Quick and simple social sharing

Cons

• Output videos require high mobile storage space

Part 6: Top 3 Free AVI Video Cutter Online

Don’t want to install video cutters on your MAC, Windows, smartphone, or any other device? No problem! You can use online video cutters and trimmers to split, cut, or trim your clips for free.

However, the problem still exists in online tools, as not all web-based editors allow importing AVI files. So to save your time and energy, you can directly go to the following online AVI cutters to complete your tasks.

Kapwing

Kapwing is an online video editor best for casual creatives, such as Vloggers and YouTubers. You can use this web-based platform to cut your videos. Gladly, Kapwing supports all AVI incomings. You can upload your AVI video files to this platform and use its trim or split feature. To do that, you need to upload your AVI video and choose the “Trim” or “Split” tool to see the magic. Once done with the trimming process, you can explore Kapwing’s other incredible traits and apply them to your project.

Features

• Video splitting, trimming, and merging
• Audio capturing
• Speed adjustment
• Image and video library
• Text editing and overlay
• Auto-generated subtitles
• Several collaboration tools
• Video creation from scratch
• Templates, shapes, and emojis
• Simple drag-and-drop interface
• Video transitions, plugins, and elements

Pros

• Free online video trimmer
• User-friendly interface
• You can export 30-minutes long projects
• Allows you to export unlimited videos with a watermark
• One watermark-free video export is available each month

Cons

• Cannot export long videos with a free account
• Only 10 minutes transcription limit is available for free users
• You need to purchase a monthly or annual subscription to remove the watermark from multiple videos

Clideo

Clideo is not just a video cutter but an online solution to all your video editing problems. The tool is super popular, with 4 million+ users a month. And why not? This is one of those web-based platforms that allow AVI video files to be imported and exported without converting them into any other formats.

Nevertheless, if you’re only looking for video cutting options, this tool makes your life easy. Simply upload your video, and select the portion of it by setting start and end times. Choose whether you want to delete or extract the selected part from the clip, and hit the “Export” button.

And within a few moments, you can enjoy a trimmed video clip. And if you plan to be more creative, you can look for other Clideo features to make videos more fascinating.

Features

• Video combining and cutting
• Resize and crop clips
• Compress your videos
• Add text and subtitles
• Add music to your video files
• Filters and color correction tools
• Audio mute, cutting, and muting
• Video rotation, flipping, and speed adjustment

Pros

• Basic tools can be used for free
• Best for beginners and intermediate users
• Ideal for AVI videos and also supports other video formats

Cons

• You cannot use the free version regularly

Aspose

Aspose is a free web-based application to cut clips. You can use this tool on any operating system. It supports all major video file formats, including AVI, MKV, MOV, MP4, FLV, WMV, WEBM, and GIF. Additionally, you can use Aspose for various other reasons, such as audio extraction, video resizing, and more.

Features

• Video cutting and compressing
• Looping, rotation, and video merging
• Adding watermarks on videos
• Sound muting
• Speed change and audio addition

Pros

• Aspose is a free online tool
• It offers straightforward options to cut and edit videos

Cons

• No color correction option
• Slow video cutting process
• Lacks timeline and other valuable features

Part 7: Bottom Line

Tired of finding AVI cutters? Relax and try these top 16 AVI video cutters for Windows, MAC, iPhone, Android, and online. Almost all these tools are free to use and are extremely handy. On the other hand, if you want to cut and trim videos professionally, download Filmora and follow the step-by-step guide in this article for making clean cuts.

Part 8: FAQs

Q1. How do I trim an AVI video?

To trim an AVI video file, ensure that the software or tool you use supports AVI input. Generally, you need to upload or import a clip on the program, select the portion of the video, and apply the cut/trim feature to make it happen.

Q2. Which is the best online video cutter?

Kapwing and Clideo are the two best online video cutters you can use for free. Both web-based tools also allow you to cut your AVI videos.

Q3. Which is the best video cutter and joiner software?

Filmora, iMovie, and Kapwing are some of the best video cutters and joiner tools. These video editors are also free to use and come with different features.

Q4. How do I trim an AVI file in Windows 10?

Trimming an AVI video file in Windows 10 is very simple. Launch the Microsoft Photos (Photo App) application on your computer, add clip, and select the “Trim” tool to trim a specific video part.

Q5. How can I cut a video on my computer for free?

MAC and Windows users can download Filmora to cut videos for free. Filmora also offers a wide range of other features to make your clips exciting. Contrarily, Windows users can use the built-in Photo App in Windows 10 or download Gihosoft or Handbrake software to cut clips. Likewise, MAC users can download VideoPad, Xilisoft Video Cutter, or iMovie for free.

FCP Hack: How to Create a VHS Aesthetic in Minutes

Do VHS Effect with Final Cut Pro in the Right Way

Shanoon Cox

Mar 27, 2024• Proven solutions

These days, nostalgia for the 1990s appears to be in fashion. VHS effects are among the most popular, as seen in internet photos and mobile apps. If you know how to make VHS effects, you can join the trend by making vintage-style videos.

Fortunately, you don’t have to reshoot your video using an analog camera and transfer the movie to a VCR video format to achieve the effect of an old recording (with the date on the screen, tracking lines, and other telltale indications). It’s made up of a few similar layers with slightly different Effects and a fun overlay layer to give it that tubular, radical ‘90s vibe.

In this article, you will learn how to add VHS effects to a video in Final Cut Pro X, how to use VHS video effects, and some common VHS filter choices to use in your next project, so keep reading:

Part1: How to do VHS effect in FCPX?

A VHS effect is a textured, warped effect that looks like an outdated analog videotape cassette recording. Adding this antique effect to an edit adds a fantastic old-school discord. How often should you utilize these glitchy and vintage effects? When the mood you’re trying to create begs for some visual or aural distortion. Perhaps you need to recreate the appearance of discovered film or express a dramatic flashback to a character’s history. In any case, VHS tapes and glitch effects are pretty trendy right now.

If you want to know how to add VHS effect to your videos without any plugins in Final Cut Pro X, then follow these steps:

Open Final Cut Pro and click on New Project.

Name your project as VHS effect in the Project Name section. Change the Video format to NTSC SD and frame rate to 29.97p. Click on Ok.

Drag and drop your footage in the timeline of FCPX. After this, scale your project so that it fits the frame.

Open the Effects, and in the search bar, type Add Noise. Select the Add Noise effect and drop it on your footage.

Go to the option Blend Mode and select Color Dodge. Now click on Type and select Gaussian Noise (Film Grain). In the Amount section, add the amount between 0.23-0.32.

Now go back to the search bar and type Gaussian Blur. Select that and drop it to your footage in FCPX.

Go to the Gaussian settings and set the amount to roughly 2.0-3.0.

Go back to the search bar in FCPX and type Sharpen. Select the Sharpen effect and drop it to your footage in Final Cut Pro.

Set the amount of sharpness to around 8.0-9.0.

Now in the search bar type Bad TV effect. Select it and drop it on your footage in FCPX.

Set the amount of the effect to roughly around 8.0-9.0. In the option, Static Type, select Gaussian Noise (Film Grain). Select Soft Light in Static Blend mode option.

Now go to the search bar again and type Prism. Select the prism effect and drop it to your footage in Final Cut Pro. This will add some 3D effect to your footage.

Set the amount to around 13.0-14.0.

Go back to the search bar and type Color Correction. Drag and drop this effect to your footage in Final Cut Pro.

Click on Exposure and adjust the Highlights, Midtones, and Shadow. Go to the Saturation option and lower it. Now go to the Color and adjust the tint of your video by changing the Global option. Also, adjust the Highlights, Midtones, and Shadows. Wait for a few minutes for it to render.

After your video is rendered, you will get the final results using the VHS filter in Final Cut Pro. Your video will look like it was made in a VCR Video format.

Part2: How to do VHS effect in easy steps?

If you want to quickly add VHS effect to your video, you can use Filmora X. You will have to add different effects and values to get the final results. You can use VHS effects on your lyric video, intro, outro, or any other video that you like by following the same process.

First, if you haven’t got Filmora, click here to download it for free!

To do VHS effects quickly, follow these steps:

• Open Wondershare Filmora on your device.
• Go to the Media tab and select Sample Colors.
• Select the Black Color.
• Drag and drop it to your project timeline and adjust its duration.
• Click on the Titles tab and select the End Credits.
• Drag and drop Credit 1 to your project timeline and pace it above the black image.
• Stretch it all the way to the black image. Change all the text in it as you like.

Go to Effect, and in the search bar, type VHS.

• Drag and drop the VHS Distortion Bad effect on the timeline above the text layer.
• Double click on it and change the Alpha value to 25 and click Ok.

• Now drag the VHS Distortion effect and place it above the previous one.
• Double click on it and change its Alpha value to 35 and click Ok.

• Drag and Place the VHS Rewind effect above the previous layer.
• Change its Alpha value to 10 and click Ok.

Now search for the Strong Glitch effect.

• Drag and drop it above the previous layer.
• Stretch it all the way across.
• Change its Alpha value to 25 and click Ok.

Search for Chromatic Aberration effect.

• Drag and drop it above the previous layer.
• Stretch it all the way across.
• Double click on it.
• Change its Alpha value to 60 and Fade to 0.05 and click Ok.

Now Search for VCR Distortion in the search bar.

1. Drag and drop it above the previous layer.
2. Stretch it all the way across. Double click on it.
3. Change its Alpha value to 25 and click Ok.
4. Add Glitch Distortion effect above the previous one.
5. Drag and drop it above the last layer.
6. Stretch it all the way across.
7. Change its Alpha value to 30 and click Ok.
8. At last, add the Distort effect and place it above the top of all layers.
9. Change its Amplitude value to 15, Frequency value to 17, and Alpha value to 0 and click Ok.
10. Export your video.

You can play around with these values to change the intensity of the VHS effect.

Still not enough? See this article: The Best Glitch Video Editors.

Part3: Where to find the best plugins or templates for the VHS effect?

If you want to recreate some of that analog feel to your video clip with plugins or templates, you can use the following recommendations to give your film a VHS effect:

Damaged VHS Effects

This is a paid collection; however, it has an extensive library of VHS-style effects. The variety of effects is impressive, with some slight distortions and others that are almost unwatchable. There’s also some stock video from TV, sound effects, and transitions. Everything may be customized to your taste.

This template will set you back $59, which is a small price to pay for such a large selection. Only After Effects CS3 and above are supported!

VHS Opener

This After Effects template is jam-packed with effects and glitches that are ideal for conjuring a nostalgic mood. Upload your film and customize your titles and text. This is a simple, vintage template that you may use.

Filmstock

A resources center built for Filmora. You can find all the materials and effects you need in Filmstock, including VHS effect.

Click to learn more about glitch effect in Filmstock.

Stories – Glitch & VHS Edition

This template is ideal for use with mobile apps like Instagram Stories. You’ll get two vertical video openers, complete with glitches and VHS effects. Premiere Pro CC 2017 and newer are supported!

VHS Glitch

The look of a VHS glitch effect is basic yet incredibly authentic. This one was made in an old-school way by causing damage to the inside of a genuine VHS tape and capturing the effect. It can’t get much more natural than that! To be confident of what you can and can’t do with this overlay, read the license information

Conclusion

The appearance and feel of your production may be significantly enhanced by using VHS video effects. Nothing brings back memories for a viewer like a VHS video. By following the steps mentioned above, you can easily use the VHS effect in your video. However, we recommend you use Wondershare Filmore to create VHS effect as you wouldn’t require any plugin. What are some of your favorite VHS effects?

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

These days, nostalgia for the 1990s appears to be in fashion. VHS effects are among the most popular, as seen in internet photos and mobile apps. If you know how to make VHS effects, you can join the trend by making vintage-style videos.

Fortunately, you don’t have to reshoot your video using an analog camera and transfer the movie to a VCR video format to achieve the effect of an old recording (with the date on the screen, tracking lines, and other telltale indications). It’s made up of a few similar layers with slightly different Effects and a fun overlay layer to give it that tubular, radical ‘90s vibe.

In this article, you will learn how to add VHS effects to a video in Final Cut Pro X, how to use VHS video effects, and some common VHS filter choices to use in your next project, so keep reading:

Part1: How to do VHS effect in FCPX?

A VHS effect is a textured, warped effect that looks like an outdated analog videotape cassette recording. Adding this antique effect to an edit adds a fantastic old-school discord. How often should you utilize these glitchy and vintage effects? When the mood you’re trying to create begs for some visual or aural distortion. Perhaps you need to recreate the appearance of discovered film or express a dramatic flashback to a character’s history. In any case, VHS tapes and glitch effects are pretty trendy right now.

If you want to know how to add VHS effect to your videos without any plugins in Final Cut Pro X, then follow these steps:

Open Final Cut Pro and click on New Project.

Name your project as VHS effect in the Project Name section. Change the Video format to NTSC SD and frame rate to 29.97p. Click on Ok.

Drag and drop your footage in the timeline of FCPX. After this, scale your project so that it fits the frame.

Open the Effects, and in the search bar, type Add Noise. Select the Add Noise effect and drop it on your footage.

Go to the option Blend Mode and select Color Dodge. Now click on Type and select Gaussian Noise (Film Grain). In the Amount section, add the amount between 0.23-0.32.

Now go back to the search bar and type Gaussian Blur. Select that and drop it to your footage in FCPX.

Go to the Gaussian settings and set the amount to roughly 2.0-3.0.

Go back to the search bar in FCPX and type Sharpen. Select the Sharpen effect and drop it to your footage in Final Cut Pro.

Set the amount of sharpness to around 8.0-9.0.

Now in the search bar type Bad TV effect. Select it and drop it on your footage in FCPX.

Set the amount of the effect to roughly around 8.0-9.0. In the option, Static Type, select Gaussian Noise (Film Grain). Select Soft Light in Static Blend mode option.

Now go to the search bar again and type Prism. Select the prism effect and drop it to your footage in Final Cut Pro. This will add some 3D effect to your footage.

Set the amount to around 13.0-14.0.

Go back to the search bar and type Color Correction. Drag and drop this effect to your footage in Final Cut Pro.

Click on Exposure and adjust the Highlights, Midtones, and Shadow. Go to the Saturation option and lower it. Now go to the Color and adjust the tint of your video by changing the Global option. Also, adjust the Highlights, Midtones, and Shadows. Wait for a few minutes for it to render.

After your video is rendered, you will get the final results using the VHS filter in Final Cut Pro. Your video will look like it was made in a VCR Video format.

Part2: How to do VHS effect in easy steps?

If you want to quickly add VHS effect to your video, you can use Filmora X. You will have to add different effects and values to get the final results. You can use VHS effects on your lyric video, intro, outro, or any other video that you like by following the same process.

First, if you haven’t got Filmora, click here to download it for free!

To do VHS effects quickly, follow these steps:

• Open Wondershare Filmora on your device.
• Go to the Media tab and select Sample Colors.
• Select the Black Color.
• Drag and drop it to your project timeline and adjust its duration.
• Click on the Titles tab and select the End Credits.
• Drag and drop Credit 1 to your project timeline and pace it above the black image.
• Stretch it all the way to the black image. Change all the text in it as you like.

Go to Effect, and in the search bar, type VHS.

• Drag and drop the VHS Distortion Bad effect on the timeline above the text layer.
• Double click on it and change the Alpha value to 25 and click Ok.

• Now drag the VHS Distortion effect and place it above the previous one.
• Double click on it and change its Alpha value to 35 and click Ok.

• Drag and Place the VHS Rewind effect above the previous layer.
• Change its Alpha value to 10 and click Ok.

Now search for the Strong Glitch effect.

• Drag and drop it above the previous layer.
• Stretch it all the way across.
• Change its Alpha value to 25 and click Ok.

Search for Chromatic Aberration effect.

• Drag and drop it above the previous layer.
• Stretch it all the way across.
• Double click on it.
• Change its Alpha value to 60 and Fade to 0.05 and click Ok.

Now Search for VCR Distortion in the search bar.

1. Drag and drop it above the previous layer.
2. Stretch it all the way across. Double click on it.
3. Change its Alpha value to 25 and click Ok.
4. Add Glitch Distortion effect above the previous one.
5. Drag and drop it above the last layer.
6. Stretch it all the way across.
7. Change its Alpha value to 30 and click Ok.
8. At last, add the Distort effect and place it above the top of all layers.
9. Change its Amplitude value to 15, Frequency value to 17, and Alpha value to 0 and click Ok.
10. Export your video.

You can play around with these values to change the intensity of the VHS effect.

Still not enough? See this article: The Best Glitch Video Editors.

Part3: Where to find the best plugins or templates for the VHS effect?

If you want to recreate some of that analog feel to your video clip with plugins or templates, you can use the following recommendations to give your film a VHS effect:

Damaged VHS Effects

This is a paid collection; however, it has an extensive library of VHS-style effects. The variety of effects is impressive, with some slight distortions and others that are almost unwatchable. There’s also some stock video from TV, sound effects, and transitions. Everything may be customized to your taste.

This template will set you back $59, which is a small price to pay for such a large selection. Only After Effects CS3 and above are supported!

VHS Opener

This After Effects template is jam-packed with effects and glitches that are ideal for conjuring a nostalgic mood. Upload your film and customize your titles and text. This is a simple, vintage template that you may use.

Filmstock

A resources center built for Filmora. You can find all the materials and effects you need in Filmstock, including VHS effect.

Click to learn more about glitch effect in Filmstock.

Stories – Glitch & VHS Edition

This template is ideal for use with mobile apps like Instagram Stories. You’ll get two vertical video openers, complete with glitches and VHS effects. Premiere Pro CC 2017 and newer are supported!

VHS Glitch

The look of a VHS glitch effect is basic yet incredibly authentic. This one was made in an old-school way by causing damage to the inside of a genuine VHS tape and capturing the effect. It can’t get much more natural than that! To be confident of what you can and can’t do with this overlay, read the license information

Conclusion

The appearance and feel of your production may be significantly enhanced by using VHS video effects. Nothing brings back memories for a viewer like a VHS video. By following the steps mentioned above, you can easily use the VHS effect in your video. However, we recommend you use Wondershare Filmore to create VHS effect as you wouldn’t require any plugin. What are some of your favorite VHS effects?

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

These days, nostalgia for the 1990s appears to be in fashion. VHS effects are among the most popular, as seen in internet photos and mobile apps. If you know how to make VHS effects, you can join the trend by making vintage-style videos.

Fortunately, you don’t have to reshoot your video using an analog camera and transfer the movie to a VCR video format to achieve the effect of an old recording (with the date on the screen, tracking lines, and other telltale indications). It’s made up of a few similar layers with slightly different Effects and a fun overlay layer to give it that tubular, radical ‘90s vibe.

In this article, you will learn how to add VHS effects to a video in Final Cut Pro X, how to use VHS video effects, and some common VHS filter choices to use in your next project, so keep reading:

Part1: How to do VHS effect in FCPX?

A VHS effect is a textured, warped effect that looks like an outdated analog videotape cassette recording. Adding this antique effect to an edit adds a fantastic old-school discord. How often should you utilize these glitchy and vintage effects? When the mood you’re trying to create begs for some visual or aural distortion. Perhaps you need to recreate the appearance of discovered film or express a dramatic flashback to a character’s history. In any case, VHS tapes and glitch effects are pretty trendy right now.

If you want to know how to add VHS effect to your videos without any plugins in Final Cut Pro X, then follow these steps:

Open Final Cut Pro and click on New Project.

Name your project as VHS effect in the Project Name section. Change the Video format to NTSC SD and frame rate to 29.97p. Click on Ok.

Drag and drop your footage in the timeline of FCPX. After this, scale your project so that it fits the frame.

Open the Effects, and in the search bar, type Add Noise. Select the Add Noise effect and drop it on your footage.

Go to the option Blend Mode and select Color Dodge. Now click on Type and select Gaussian Noise (Film Grain). In the Amount section, add the amount between 0.23-0.32.

Now go back to the search bar and type Gaussian Blur. Select that and drop it to your footage in FCPX.

Go to the Gaussian settings and set the amount to roughly 2.0-3.0.

Go back to the search bar in FCPX and type Sharpen. Select the Sharpen effect and drop it to your footage in Final Cut Pro.

Set the amount of sharpness to around 8.0-9.0.

Now in the search bar type Bad TV effect. Select it and drop it on your footage in FCPX.

Set the amount of the effect to roughly around 8.0-9.0. In the option, Static Type, select Gaussian Noise (Film Grain). Select Soft Light in Static Blend mode option.

Now go to the search bar again and type Prism. Select the prism effect and drop it to your footage in Final Cut Pro. This will add some 3D effect to your footage.

Set the amount to around 13.0-14.0.

Go back to the search bar and type Color Correction. Drag and drop this effect to your footage in Final Cut Pro.

Click on Exposure and adjust the Highlights, Midtones, and Shadow. Go to the Saturation option and lower it. Now go to the Color and adjust the tint of your video by changing the Global option. Also, adjust the Highlights, Midtones, and Shadows. Wait for a few minutes for it to render.

After your video is rendered, you will get the final results using the VHS filter in Final Cut Pro. Your video will look like it was made in a VCR Video format.

Part2: How to do VHS effect in easy steps?

If you want to quickly add VHS effect to your video, you can use Filmora X. You will have to add different effects and values to get the final results. You can use VHS effects on your lyric video, intro, outro, or any other video that you like by following the same process.

First, if you haven’t got Filmora, click here to download it for free!

To do VHS effects quickly, follow these steps:

• Open Wondershare Filmora on your device.
• Go to the Media tab and select Sample Colors.
• Select the Black Color.
• Drag and drop it to your project timeline and adjust its duration.
• Click on the Titles tab and select the End Credits.
• Drag and drop Credit 1 to your project timeline and pace it above the black image.
• Stretch it all the way to the black image. Change all the text in it as you like.

Go to Effect, and in the search bar, type VHS.

• Drag and drop the VHS Distortion Bad effect on the timeline above the text layer.
• Double click on it and change the Alpha value to 25 and click Ok.

• Now drag the VHS Distortion effect and place it above the previous one.
• Double click on it and change its Alpha value to 35 and click Ok.

• Drag and Place the VHS Rewind effect above the previous layer.
• Change its Alpha value to 10 and click Ok.

Now search for the Strong Glitch effect.

• Drag and drop it above the previous layer.
• Stretch it all the way across.
• Change its Alpha value to 25 and click Ok.

Search for Chromatic Aberration effect.

• Drag and drop it above the previous layer.
• Stretch it all the way across.
• Double click on it.
• Change its Alpha value to 60 and Fade to 0.05 and click Ok.

Now Search for VCR Distortion in the search bar.

1. Drag and drop it above the previous layer.
2. Stretch it all the way across. Double click on it.
3. Change its Alpha value to 25 and click Ok.
4. Add Glitch Distortion effect above the previous one.
5. Drag and drop it above the last layer.
6. Stretch it all the way across.
7. Change its Alpha value to 30 and click Ok.
8. At last, add the Distort effect and place it above the top of all layers.
9. Change its Amplitude value to 15, Frequency value to 17, and Alpha value to 0 and click Ok.
10. Export your video.

You can play around with these values to change the intensity of the VHS effect.

Still not enough? See this article: The Best Glitch Video Editors.

Part3: Where to find the best plugins or templates for the VHS effect?

If you want to recreate some of that analog feel to your video clip with plugins or templates, you can use the following recommendations to give your film a VHS effect:

Damaged VHS Effects

This is a paid collection; however, it has an extensive library of VHS-style effects. The variety of effects is impressive, with some slight distortions and others that are almost unwatchable. There’s also some stock video from TV, sound effects, and transitions. Everything may be customized to your taste.

This template will set you back $59, which is a small price to pay for such a large selection. Only After Effects CS3 and above are supported!

VHS Opener

This After Effects template is jam-packed with effects and glitches that are ideal for conjuring a nostalgic mood. Upload your film and customize your titles and text. This is a simple, vintage template that you may use.

Filmstock

A resources center built for Filmora. You can find all the materials and effects you need in Filmstock, including VHS effect.

Click to learn more about glitch effect in Filmstock.

Stories – Glitch & VHS Edition

This template is ideal for use with mobile apps like Instagram Stories. You’ll get two vertical video openers, complete with glitches and VHS effects. Premiere Pro CC 2017 and newer are supported!

VHS Glitch

The look of a VHS glitch effect is basic yet incredibly authentic. This one was made in an old-school way by causing damage to the inside of a genuine VHS tape and capturing the effect. It can’t get much more natural than that! To be confident of what you can and can’t do with this overlay, read the license information

Conclusion

The appearance and feel of your production may be significantly enhanced by using VHS video effects. Nothing brings back memories for a viewer like a VHS video. By following the steps mentioned above, you can easily use the VHS effect in your video. However, we recommend you use Wondershare Filmore to create VHS effect as you wouldn’t require any plugin. What are some of your favorite VHS effects?

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

These days, nostalgia for the 1990s appears to be in fashion. VHS effects are among the most popular, as seen in internet photos and mobile apps. If you know how to make VHS effects, you can join the trend by making vintage-style videos.

Fortunately, you don’t have to reshoot your video using an analog camera and transfer the movie to a VCR video format to achieve the effect of an old recording (with the date on the screen, tracking lines, and other telltale indications). It’s made up of a few similar layers with slightly different Effects and a fun overlay layer to give it that tubular, radical ‘90s vibe.

In this article, you will learn how to add VHS effects to a video in Final Cut Pro X, how to use VHS video effects, and some common VHS filter choices to use in your next project, so keep reading:

Part1: How to do VHS effect in FCPX?

A VHS effect is a textured, warped effect that looks like an outdated analog videotape cassette recording. Adding this antique effect to an edit adds a fantastic old-school discord. How often should you utilize these glitchy and vintage effects? When the mood you’re trying to create begs for some visual or aural distortion. Perhaps you need to recreate the appearance of discovered film or express a dramatic flashback to a character’s history. In any case, VHS tapes and glitch effects are pretty trendy right now.

If you want to know how to add VHS effect to your videos without any plugins in Final Cut Pro X, then follow these steps:

Open Final Cut Pro and click on New Project.

Name your project as VHS effect in the Project Name section. Change the Video format to NTSC SD and frame rate to 29.97p. Click on Ok.

Drag and drop your footage in the timeline of FCPX. After this, scale your project so that it fits the frame.

Open the Effects, and in the search bar, type Add Noise. Select the Add Noise effect and drop it on your footage.

Go to the option Blend Mode and select Color Dodge. Now click on Type and select Gaussian Noise (Film Grain). In the Amount section, add the amount between 0.23-0.32.

Now go back to the search bar and type Gaussian Blur. Select that and drop it to your footage in FCPX.

Go to the Gaussian settings and set the amount to roughly 2.0-3.0.

Go back to the search bar in FCPX and type Sharpen. Select the Sharpen effect and drop it to your footage in Final Cut Pro.

Set the amount of sharpness to around 8.0-9.0.

Now in the search bar type Bad TV effect. Select it and drop it on your footage in FCPX.

Set the amount of the effect to roughly around 8.0-9.0. In the option, Static Type, select Gaussian Noise (Film Grain). Select Soft Light in Static Blend mode option.

Now go to the search bar again and type Prism. Select the prism effect and drop it to your footage in Final Cut Pro. This will add some 3D effect to your footage.

Set the amount to around 13.0-14.0.

Go back to the search bar and type Color Correction. Drag and drop this effect to your footage in Final Cut Pro.

Click on Exposure and adjust the Highlights, Midtones, and Shadow. Go to the Saturation option and lower it. Now go to the Color and adjust the tint of your video by changing the Global option. Also, adjust the Highlights, Midtones, and Shadows. Wait for a few minutes for it to render.

After your video is rendered, you will get the final results using the VHS filter in Final Cut Pro. Your video will look like it was made in a VCR Video format.

Part2: How to do VHS effect in easy steps?

If you want to quickly add VHS effect to your video, you can use Filmora X. You will have to add different effects and values to get the final results. You can use VHS effects on your lyric video, intro, outro, or any other video that you like by following the same process.

First, if you haven’t got Filmora, click here to download it for free!

To do VHS effects quickly, follow these steps:

• Open Wondershare Filmora on your device.
• Go to the Media tab and select Sample Colors.
• Select the Black Color.
• Drag and drop it to your project timeline and adjust its duration.
• Click on the Titles tab and select the End Credits.
• Drag and drop Credit 1 to your project timeline and pace it above the black image.
• Stretch it all the way to the black image. Change all the text in it as you like.

Go to Effect, and in the search bar, type VHS.

• Drag and drop the VHS Distortion Bad effect on the timeline above the text layer.
• Double click on it and change the Alpha value to 25 and click Ok.

• Now drag the VHS Distortion effect and place it above the previous one.
• Double click on it and change its Alpha value to 35 and click Ok.

• Drag and Place the VHS Rewind effect above the previous layer.
• Change its Alpha value to 10 and click Ok.

Now search for the Strong Glitch effect.

• Drag and drop it above the previous layer.
• Stretch it all the way across.
• Change its Alpha value to 25 and click Ok.

Search for Chromatic Aberration effect.

• Drag and drop it above the previous layer.
• Stretch it all the way across.
• Double click on it.
• Change its Alpha value to 60 and Fade to 0.05 and click Ok.

Now Search for VCR Distortion in the search bar.

1. Drag and drop it above the previous layer.
2. Stretch it all the way across. Double click on it.
3. Change its Alpha value to 25 and click Ok.
4. Add Glitch Distortion effect above the previous one.
5. Drag and drop it above the last layer.
6. Stretch it all the way across.
7. Change its Alpha value to 30 and click Ok.
8. At last, add the Distort effect and place it above the top of all layers.
9. Change its Amplitude value to 15, Frequency value to 17, and Alpha value to 0 and click Ok.
10. Export your video.

You can play around with these values to change the intensity of the VHS effect.

Still not enough? See this article: The Best Glitch Video Editors.

Part3: Where to find the best plugins or templates for the VHS effect?

If you want to recreate some of that analog feel to your video clip with plugins or templates, you can use the following recommendations to give your film a VHS effect:

Damaged VHS Effects

This is a paid collection; however, it has an extensive library of VHS-style effects. The variety of effects is impressive, with some slight distortions and others that are almost unwatchable. There’s also some stock video from TV, sound effects, and transitions. Everything may be customized to your taste.

This template will set you back $59, which is a small price to pay for such a large selection. Only After Effects CS3 and above are supported!

VHS Opener

This After Effects template is jam-packed with effects and glitches that are ideal for conjuring a nostalgic mood. Upload your film and customize your titles and text. This is a simple, vintage template that you may use.

Filmstock

A resources center built for Filmora. You can find all the materials and effects you need in Filmstock, including VHS effect.

Click to learn more about glitch effect in Filmstock.

Stories – Glitch & VHS Edition

This template is ideal for use with mobile apps like Instagram Stories. You’ll get two vertical video openers, complete with glitches and VHS effects. Premiere Pro CC 2017 and newer are supported!

VHS Glitch

The look of a VHS glitch effect is basic yet incredibly authentic. This one was made in an old-school way by causing damage to the inside of a genuine VHS tape and capturing the effect. It can’t get much more natural than that! To be confident of what you can and can’t do with this overlay, read the license information

Conclusion

The appearance and feel of your production may be significantly enhanced by using VHS video effects. Nothing brings back memories for a viewer like a VHS video. By following the steps mentioned above, you can easily use the VHS effect in your video. However, we recommend you use Wondershare Filmore to create VHS effect as you wouldn’t require any plugin. What are some of your favorite VHS effects?

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: