:max_bytes(150000):strip_icc():format(webp)/best-instagram-captions-4171697-ae21b04e6866470c80a50c9bef1cc26e.png)
New Video Formatting Made Easy Change Shape, Size, and Aspect Ratio
Video Formatting Made Easy: Change Shape, Size, and Aspect Ratio
How to Change Shape of a Video?
Liza Brown
Mar 27, 2024• Proven solutions
While most videos nowadays are rectangular, and are recorded in either landscape or portrait orientation, there are some social media platforms that require the clips to be square shaped. If you want to upload your footages on such websites, it is essential to learn how to change video shape.
Another benefit of changing the shape of the recorded films is that they can be adjusted in limited amount of space, especially if they are to be posted on a website. Furthermore, some fancy designs such as star-shaped or circle-shaped videos attract more attention when used in digital marketing campaigns.
With that said, here you will learn how to change the shape of a video using one of the most advanced and versatile post-production tools, Wondershare Filmora.
Want to learn more about aspect ratio of your video? Click here!
Or, you just want to transfer your video into vertical.
Part 1: How to Change Video Shape from Rectangle to Square
Depending on the recording device and the target audiences a video is intended to be distributed to, the aspect ratio of the produced footage could be 16:9, 4:3, or 21:9 that makes the film rectangular-shaped. Given that, the aspect ratio can be modified to change the film shape from rectangle to square.
The instructions given below explain how to change video shape from rectangle to square in Wondershare Filmora:
Step 1: Import Video to Timeline
Launch Wondershare Filmora on your PC (a Windows 10 computer is used here), click the Add Files icon from the center of the Media window present at the upper-left section, and use the Open box that appears to select and import the source video to Filmora. Next, drag the video from the Media window to the Timeline, and select your preferred option when/if the Project Setting confirmation box appears.
Step 2: Change Aspect Ratio
Select the video in the Timeline, and click the Crop and Zoom icon from the upper-left area of the Timeline itself. On the Crop and Zoom window that opens next, select 1:1 from the Ratio drop-down list, and click OK to save the new setting.
Step 3: Export the Video
Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box, select your preferred format from the Format list in the left pane, optionally click SETTINGS from the right window to make other adjustments if necessary, and click EXPORT from the bottom-right corner of the box.
For more details, please refer to this article: How to Resize a Video to Right Aspect Ratio and Size.
Part 2: Change Video Shape by Cropping
If your preferred aspect ratio isn’t available in the ‘Ratio’ drop-down list of the ‘Crop and Zoom’ window, Wondershare Filmora allows you to manually change the video to a custom shape.
You can learn how to change the shape of a video to an unlisted aspect ratio by following the instructions given below:
Step 1: Import the Video and Get to the Crop and Zoom Window
Follow the method explained in Step 1 of Part 1 to import a video to Wondershare Filmora, and then add it to the Timeline.
Step 2: Select Custom Ratio
Select the video in the Timeline, and click the Crop and Zoom icon as explained earlier to open its window. Next, select Custom from the Ratio drop-down list to be able to crop the videos unproportionally.
Step 3: Crop the Video Manually
Drag the cropping handles from any one edge of the video. Repeat this process for all the four sides to select the area of interest. Click OK to save the changes.
Step 4: Export the Video
Follow the process explained in Step 3 of Part 1 to export the modified video.
Part 3: Change Video Shape to Circle or Other Shapes in Filmora
Another, rather better way of changing videos to custom shapes is with the help of image or shape masking.
In Filmora you can apply image masks either from the existing presets, i.e. circle, star, diamond, etc., or you can add custom photos if need be. Professionals generally use custom pictures to create fancy logos and titles.
On the other hand, shape masking allows you to mask a background video with a foreground footage in a custom shape.
Although the basic concept of both types of masking is same, the options available under each can be used to produce effective outputs.
That said, following are the instructions to apply both types of masking to your videos:
Image Masking
The steps given below explain how to change video shape with image masking in Filmora:
Step 1: Add Clip to Timeline
Use the method explained in the previous sections to import a clip and add it to the Timeline.
Step 2: Add Image Mask
Click Effects from the standard toolbar at the top, select Utility from the left pane, drag Image Mask from the Utility window, and drop it on top of the video itself in the Timeline. Notice how the fx icon appears on the video layer showing that the effect has been successfully added.
Step 3: Customize Image Mask
On the Timeline, double-click the video layer you applied Image Mask to, and notice all the available shapes available under the Preset Mask section on the Video Effects > Image Mask window that appears at the upper-left area. You can double-click any of the available shape presets to apply it to the video layer. In addition, drag the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size, and edge smoothness respectively. You can also check the Invert Mask box to reverse the masking effect on the video. Finally, click OK to save the changes, and follow the method explained in earlier parts to export the video.
Shape Masking
The following steps explain how to change the shape of a video with shape masks in Filmora:
Step 1: Get to the Utility Window
Add at two footages on their individual layers in the Timeline (make sure to place the second layer above the first one), and follow the method explained above to get to the Effects > Utility window.
Step 2: Add Shape Mask
Drag Shape Mask from the Utility window, and drop it on top of the video itself in the Timeline. Confirm that the fx icon appears on the video layer to ensure that the effect has been applied.
Step 3: Customize Shape Mask
Double-click the video layer in the Timeline you applied shape mask to. On the Video Effects > Shape Mask window, use the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size and edge smoothness respectively. Optionally check the Invert Mask box to reverse the masking effect, and click OK to save the settings. Next, follow the method explained earlier to export the video.
FAQs
1. What’s the difference between Image Mask and Shape Mask in Filmora?
A) In Filmora, Image Mask allows you to use an image (or any available preset) for masking so that the background footage is cropped to the shape of the picture. This is generally used to create logos and dynamic titles for movies or documentaries. On the other hand, Shape Mask enables you to mask the background clip with the foreground footage in the form of a shape that could be positioned and customized using the available sliders.
2. How many image masks are available in Filmora?
A) At the time of this writing, Wondershare Filmora has around 40 image mask presets. In addition, it also allows you to add custom images from your PC for more dynamic approach.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
While most videos nowadays are rectangular, and are recorded in either landscape or portrait orientation, there are some social media platforms that require the clips to be square shaped. If you want to upload your footages on such websites, it is essential to learn how to change video shape.
Another benefit of changing the shape of the recorded films is that they can be adjusted in limited amount of space, especially if they are to be posted on a website. Furthermore, some fancy designs such as star-shaped or circle-shaped videos attract more attention when used in digital marketing campaigns.
With that said, here you will learn how to change the shape of a video using one of the most advanced and versatile post-production tools, Wondershare Filmora.
Want to learn more about aspect ratio of your video? Click here!
Or, you just want to transfer your video into vertical.
Part 1: How to Change Video Shape from Rectangle to Square
Depending on the recording device and the target audiences a video is intended to be distributed to, the aspect ratio of the produced footage could be 16:9, 4:3, or 21:9 that makes the film rectangular-shaped. Given that, the aspect ratio can be modified to change the film shape from rectangle to square.
The instructions given below explain how to change video shape from rectangle to square in Wondershare Filmora:
Step 1: Import Video to Timeline
Launch Wondershare Filmora on your PC (a Windows 10 computer is used here), click the Add Files icon from the center of the Media window present at the upper-left section, and use the Open box that appears to select and import the source video to Filmora. Next, drag the video from the Media window to the Timeline, and select your preferred option when/if the Project Setting confirmation box appears.
Step 2: Change Aspect Ratio
Select the video in the Timeline, and click the Crop and Zoom icon from the upper-left area of the Timeline itself. On the Crop and Zoom window that opens next, select 1:1 from the Ratio drop-down list, and click OK to save the new setting.
Step 3: Export the Video
Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box, select your preferred format from the Format list in the left pane, optionally click SETTINGS from the right window to make other adjustments if necessary, and click EXPORT from the bottom-right corner of the box.
For more details, please refer to this article: How to Resize a Video to Right Aspect Ratio and Size.
Part 2: Change Video Shape by Cropping
If your preferred aspect ratio isn’t available in the ‘Ratio’ drop-down list of the ‘Crop and Zoom’ window, Wondershare Filmora allows you to manually change the video to a custom shape.
You can learn how to change the shape of a video to an unlisted aspect ratio by following the instructions given below:
Step 1: Import the Video and Get to the Crop and Zoom Window
Follow the method explained in Step 1 of Part 1 to import a video to Wondershare Filmora, and then add it to the Timeline.
Step 2: Select Custom Ratio
Select the video in the Timeline, and click the Crop and Zoom icon as explained earlier to open its window. Next, select Custom from the Ratio drop-down list to be able to crop the videos unproportionally.
Step 3: Crop the Video Manually
Drag the cropping handles from any one edge of the video. Repeat this process for all the four sides to select the area of interest. Click OK to save the changes.
Step 4: Export the Video
Follow the process explained in Step 3 of Part 1 to export the modified video.
Part 3: Change Video Shape to Circle or Other Shapes in Filmora
Another, rather better way of changing videos to custom shapes is with the help of image or shape masking.
In Filmora you can apply image masks either from the existing presets, i.e. circle, star, diamond, etc., or you can add custom photos if need be. Professionals generally use custom pictures to create fancy logos and titles.
On the other hand, shape masking allows you to mask a background video with a foreground footage in a custom shape.
Although the basic concept of both types of masking is same, the options available under each can be used to produce effective outputs.
That said, following are the instructions to apply both types of masking to your videos:
Image Masking
The steps given below explain how to change video shape with image masking in Filmora:
Step 1: Add Clip to Timeline
Use the method explained in the previous sections to import a clip and add it to the Timeline.
Step 2: Add Image Mask
Click Effects from the standard toolbar at the top, select Utility from the left pane, drag Image Mask from the Utility window, and drop it on top of the video itself in the Timeline. Notice how the fx icon appears on the video layer showing that the effect has been successfully added.
Step 3: Customize Image Mask
On the Timeline, double-click the video layer you applied Image Mask to, and notice all the available shapes available under the Preset Mask section on the Video Effects > Image Mask window that appears at the upper-left area. You can double-click any of the available shape presets to apply it to the video layer. In addition, drag the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size, and edge smoothness respectively. You can also check the Invert Mask box to reverse the masking effect on the video. Finally, click OK to save the changes, and follow the method explained in earlier parts to export the video.
Shape Masking
The following steps explain how to change the shape of a video with shape masks in Filmora:
Step 1: Get to the Utility Window
Add at two footages on their individual layers in the Timeline (make sure to place the second layer above the first one), and follow the method explained above to get to the Effects > Utility window.
Step 2: Add Shape Mask
Drag Shape Mask from the Utility window, and drop it on top of the video itself in the Timeline. Confirm that the fx icon appears on the video layer to ensure that the effect has been applied.
Step 3: Customize Shape Mask
Double-click the video layer in the Timeline you applied shape mask to. On the Video Effects > Shape Mask window, use the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size and edge smoothness respectively. Optionally check the Invert Mask box to reverse the masking effect, and click OK to save the settings. Next, follow the method explained earlier to export the video.
FAQs
1. What’s the difference between Image Mask and Shape Mask in Filmora?
A) In Filmora, Image Mask allows you to use an image (or any available preset) for masking so that the background footage is cropped to the shape of the picture. This is generally used to create logos and dynamic titles for movies or documentaries. On the other hand, Shape Mask enables you to mask the background clip with the foreground footage in the form of a shape that could be positioned and customized using the available sliders.
2. How many image masks are available in Filmora?
A) At the time of this writing, Wondershare Filmora has around 40 image mask presets. In addition, it also allows you to add custom images from your PC for more dynamic approach.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
While most videos nowadays are rectangular, and are recorded in either landscape or portrait orientation, there are some social media platforms that require the clips to be square shaped. If you want to upload your footages on such websites, it is essential to learn how to change video shape.
Another benefit of changing the shape of the recorded films is that they can be adjusted in limited amount of space, especially if they are to be posted on a website. Furthermore, some fancy designs such as star-shaped or circle-shaped videos attract more attention when used in digital marketing campaigns.
With that said, here you will learn how to change the shape of a video using one of the most advanced and versatile post-production tools, Wondershare Filmora.
Want to learn more about aspect ratio of your video? Click here!
Or, you just want to transfer your video into vertical.
Part 1: How to Change Video Shape from Rectangle to Square
Depending on the recording device and the target audiences a video is intended to be distributed to, the aspect ratio of the produced footage could be 16:9, 4:3, or 21:9 that makes the film rectangular-shaped. Given that, the aspect ratio can be modified to change the film shape from rectangle to square.
The instructions given below explain how to change video shape from rectangle to square in Wondershare Filmora:
Step 1: Import Video to Timeline
Launch Wondershare Filmora on your PC (a Windows 10 computer is used here), click the Add Files icon from the center of the Media window present at the upper-left section, and use the Open box that appears to select and import the source video to Filmora. Next, drag the video from the Media window to the Timeline, and select your preferred option when/if the Project Setting confirmation box appears.
Step 2: Change Aspect Ratio
Select the video in the Timeline, and click the Crop and Zoom icon from the upper-left area of the Timeline itself. On the Crop and Zoom window that opens next, select 1:1 from the Ratio drop-down list, and click OK to save the new setting.
Step 3: Export the Video
Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box, select your preferred format from the Format list in the left pane, optionally click SETTINGS from the right window to make other adjustments if necessary, and click EXPORT from the bottom-right corner of the box.
For more details, please refer to this article: How to Resize a Video to Right Aspect Ratio and Size.
Part 2: Change Video Shape by Cropping
If your preferred aspect ratio isn’t available in the ‘Ratio’ drop-down list of the ‘Crop and Zoom’ window, Wondershare Filmora allows you to manually change the video to a custom shape.
You can learn how to change the shape of a video to an unlisted aspect ratio by following the instructions given below:
Step 1: Import the Video and Get to the Crop and Zoom Window
Follow the method explained in Step 1 of Part 1 to import a video to Wondershare Filmora, and then add it to the Timeline.
Step 2: Select Custom Ratio
Select the video in the Timeline, and click the Crop and Zoom icon as explained earlier to open its window. Next, select Custom from the Ratio drop-down list to be able to crop the videos unproportionally.
Step 3: Crop the Video Manually
Drag the cropping handles from any one edge of the video. Repeat this process for all the four sides to select the area of interest. Click OK to save the changes.
Step 4: Export the Video
Follow the process explained in Step 3 of Part 1 to export the modified video.
Part 3: Change Video Shape to Circle or Other Shapes in Filmora
Another, rather better way of changing videos to custom shapes is with the help of image or shape masking.
In Filmora you can apply image masks either from the existing presets, i.e. circle, star, diamond, etc., or you can add custom photos if need be. Professionals generally use custom pictures to create fancy logos and titles.
On the other hand, shape masking allows you to mask a background video with a foreground footage in a custom shape.
Although the basic concept of both types of masking is same, the options available under each can be used to produce effective outputs.
That said, following are the instructions to apply both types of masking to your videos:
Image Masking
The steps given below explain how to change video shape with image masking in Filmora:
Step 1: Add Clip to Timeline
Use the method explained in the previous sections to import a clip and add it to the Timeline.
Step 2: Add Image Mask
Click Effects from the standard toolbar at the top, select Utility from the left pane, drag Image Mask from the Utility window, and drop it on top of the video itself in the Timeline. Notice how the fx icon appears on the video layer showing that the effect has been successfully added.
Step 3: Customize Image Mask
On the Timeline, double-click the video layer you applied Image Mask to, and notice all the available shapes available under the Preset Mask section on the Video Effects > Image Mask window that appears at the upper-left area. You can double-click any of the available shape presets to apply it to the video layer. In addition, drag the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size, and edge smoothness respectively. You can also check the Invert Mask box to reverse the masking effect on the video. Finally, click OK to save the changes, and follow the method explained in earlier parts to export the video.
Shape Masking
The following steps explain how to change the shape of a video with shape masks in Filmora:
Step 1: Get to the Utility Window
Add at two footages on their individual layers in the Timeline (make sure to place the second layer above the first one), and follow the method explained above to get to the Effects > Utility window.
Step 2: Add Shape Mask
Drag Shape Mask from the Utility window, and drop it on top of the video itself in the Timeline. Confirm that the fx icon appears on the video layer to ensure that the effect has been applied.
Step 3: Customize Shape Mask
Double-click the video layer in the Timeline you applied shape mask to. On the Video Effects > Shape Mask window, use the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size and edge smoothness respectively. Optionally check the Invert Mask box to reverse the masking effect, and click OK to save the settings. Next, follow the method explained earlier to export the video.
FAQs
1. What’s the difference between Image Mask and Shape Mask in Filmora?
A) In Filmora, Image Mask allows you to use an image (or any available preset) for masking so that the background footage is cropped to the shape of the picture. This is generally used to create logos and dynamic titles for movies or documentaries. On the other hand, Shape Mask enables you to mask the background clip with the foreground footage in the form of a shape that could be positioned and customized using the available sliders.
2. How many image masks are available in Filmora?
A) At the time of this writing, Wondershare Filmora has around 40 image mask presets. In addition, it also allows you to add custom images from your PC for more dynamic approach.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
While most videos nowadays are rectangular, and are recorded in either landscape or portrait orientation, there are some social media platforms that require the clips to be square shaped. If you want to upload your footages on such websites, it is essential to learn how to change video shape.
Another benefit of changing the shape of the recorded films is that they can be adjusted in limited amount of space, especially if they are to be posted on a website. Furthermore, some fancy designs such as star-shaped or circle-shaped videos attract more attention when used in digital marketing campaigns.
With that said, here you will learn how to change the shape of a video using one of the most advanced and versatile post-production tools, Wondershare Filmora.
Want to learn more about aspect ratio of your video? Click here!
Or, you just want to transfer your video into vertical.
Part 1: How to Change Video Shape from Rectangle to Square
Depending on the recording device and the target audiences a video is intended to be distributed to, the aspect ratio of the produced footage could be 16:9, 4:3, or 21:9 that makes the film rectangular-shaped. Given that, the aspect ratio can be modified to change the film shape from rectangle to square.
The instructions given below explain how to change video shape from rectangle to square in Wondershare Filmora:
Step 1: Import Video to Timeline
Launch Wondershare Filmora on your PC (a Windows 10 computer is used here), click the Add Files icon from the center of the Media window present at the upper-left section, and use the Open box that appears to select and import the source video to Filmora. Next, drag the video from the Media window to the Timeline, and select your preferred option when/if the Project Setting confirmation box appears.
Step 2: Change Aspect Ratio
Select the video in the Timeline, and click the Crop and Zoom icon from the upper-left area of the Timeline itself. On the Crop and Zoom window that opens next, select 1:1 from the Ratio drop-down list, and click OK to save the new setting.
Step 3: Export the Video
Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box, select your preferred format from the Format list in the left pane, optionally click SETTINGS from the right window to make other adjustments if necessary, and click EXPORT from the bottom-right corner of the box.
For more details, please refer to this article: How to Resize a Video to Right Aspect Ratio and Size.
Part 2: Change Video Shape by Cropping
If your preferred aspect ratio isn’t available in the ‘Ratio’ drop-down list of the ‘Crop and Zoom’ window, Wondershare Filmora allows you to manually change the video to a custom shape.
You can learn how to change the shape of a video to an unlisted aspect ratio by following the instructions given below:
Step 1: Import the Video and Get to the Crop and Zoom Window
Follow the method explained in Step 1 of Part 1 to import a video to Wondershare Filmora, and then add it to the Timeline.
Step 2: Select Custom Ratio
Select the video in the Timeline, and click the Crop and Zoom icon as explained earlier to open its window. Next, select Custom from the Ratio drop-down list to be able to crop the videos unproportionally.
Step 3: Crop the Video Manually
Drag the cropping handles from any one edge of the video. Repeat this process for all the four sides to select the area of interest. Click OK to save the changes.
Step 4: Export the Video
Follow the process explained in Step 3 of Part 1 to export the modified video.
Part 3: Change Video Shape to Circle or Other Shapes in Filmora
Another, rather better way of changing videos to custom shapes is with the help of image or shape masking.
In Filmora you can apply image masks either from the existing presets, i.e. circle, star, diamond, etc., or you can add custom photos if need be. Professionals generally use custom pictures to create fancy logos and titles.
On the other hand, shape masking allows you to mask a background video with a foreground footage in a custom shape.
Although the basic concept of both types of masking is same, the options available under each can be used to produce effective outputs.
That said, following are the instructions to apply both types of masking to your videos:
Image Masking
The steps given below explain how to change video shape with image masking in Filmora:
Step 1: Add Clip to Timeline
Use the method explained in the previous sections to import a clip and add it to the Timeline.
Step 2: Add Image Mask
Click Effects from the standard toolbar at the top, select Utility from the left pane, drag Image Mask from the Utility window, and drop it on top of the video itself in the Timeline. Notice how the fx icon appears on the video layer showing that the effect has been successfully added.
Step 3: Customize Image Mask
On the Timeline, double-click the video layer you applied Image Mask to, and notice all the available shapes available under the Preset Mask section on the Video Effects > Image Mask window that appears at the upper-left area. You can double-click any of the available shape presets to apply it to the video layer. In addition, drag the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size, and edge smoothness respectively. You can also check the Invert Mask box to reverse the masking effect on the video. Finally, click OK to save the changes, and follow the method explained in earlier parts to export the video.
Shape Masking
The following steps explain how to change the shape of a video with shape masks in Filmora:
Step 1: Get to the Utility Window
Add at two footages on their individual layers in the Timeline (make sure to place the second layer above the first one), and follow the method explained above to get to the Effects > Utility window.
Step 2: Add Shape Mask
Drag Shape Mask from the Utility window, and drop it on top of the video itself in the Timeline. Confirm that the fx icon appears on the video layer to ensure that the effect has been applied.
Step 3: Customize Shape Mask
Double-click the video layer in the Timeline you applied shape mask to. On the Video Effects > Shape Mask window, use the X and Y, and Width, Height, and Feather sliders to adjust the mask’s position, size and edge smoothness respectively. Optionally check the Invert Mask box to reverse the masking effect, and click OK to save the settings. Next, follow the method explained earlier to export the video.
FAQs
1. What’s the difference between Image Mask and Shape Mask in Filmora?
A) In Filmora, Image Mask allows you to use an image (or any available preset) for masking so that the background footage is cropped to the shape of the picture. This is generally used to create logos and dynamic titles for movies or documentaries. On the other hand, Shape Mask enables you to mask the background clip with the foreground footage in the form of a shape that could be positioned and customized using the available sliders.
2. How many image masks are available in Filmora?
A) At the time of this writing, Wondershare Filmora has around 40 image mask presets. In addition, it also allows you to add custom images from your PC for more dynamic approach.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
MPEG Video Splitter Reviews: 5 Best Free Tools
Top 5 Best Free MPEG Video Splitters
Ollie Mattison
Mar 27, 2024• Proven solutions
The growing demand of automated video splitting software provides the users several different options to make the best use of required feature. However, getting benefit of the available attributes is the second task to do; the first most important step is to select the best video splitting software. The purpose of using the video splitter is to slice the video into fragments; it is used to extract particular outlooks and upload to the internet; the splitting files can also be played back. However, this task can be performed through many video splitting tools but the user’s intention is to explore the best; for this purpose, a list of top 5 free MPEG video splitters are under discussion:
- Free Video Cutter
- Easy Video Splitter
- VidSplitter
- Avidemux
- MPEG Streamclip
- Recommended: Wondershare Filmora (originally Wondershare Video Editor)
Free Video Cutter
This video splitting software is a remarkable tools used to cut different kinds of videos, including MOV, MPEG-1, MPEG-2, WMN, AVI, MKV, MP3 and more. It is really easy-to-use and keeps the original video quality. Meanwhile, it provides different output options in accordance with the user’s expectations.
Pros:
- Supports multiple video formats;
- User friendly interface;
- Multiple output format options.
Cons:
- Lacks in sound quality;
- Fewer sound settings.
Easy Video Splitter
The main purpose of this software is to make parts or segments of the large video file into the smaller ones; it is a free applications used to split the files. The videos that cannot be fit into DVD and CD and need to be burnt, are cut or divide using easy video splitter. It supports multiple video formats both as input and output. The best thing about this tool is that it does not need any information from the user; he is supposed to select the way through which he wants to split the video, other functions are performed automatically by the software program.
Pros:
- User-friendly interface;
- Lightweight, portable and compatible;
- Maintains good quality of the input file;
- Sustains batch processing.
Cons:
- Expensive system requirements and resources.
VidSplitter
The users prefer VidSplitter to use because of its reliability and durability; it is used to convert large MPEG files into the fragments using several different formats. The large files in video formats such as MPEG, AVI, ASF and WMV are easily cut and assembled into numerous formats at fast speed. Furthermore, VidSplitter enables the users to save the processed file on storage media.
Pros:
- Easily-to-use interface;
- Splits and converts the clips at fast speed;
- Focuses on customization.
Cons:
- Help file is not available;
- Time-based selection strategy is not supported.
Avidemux
Supporting a variety of video formats such as AVI, DVD compatible MPEG files, MP4 and ASF, Avidemux helps the users split the videos in to small fragments. Tasks can be automated using projects, job queue and powerful scripting capabilities.
Pros:
- Different video editing options;
- Easy-to-use;
- Available on different platforms: Windows, Mac and Linux.
Cons:
- Outdated interface.
MPEG Streamclip
It is one of the leading video editing software programs for MPEG video files. It also supports various other video formats such as VOB, PS, M2P, MOD, VRO, DAT, MOV. It enables the users to split the large video files into small video clips in just few seconds.
Pros:
- Supports a wide range of video formats;
- Different video editing functions.
Cons:
- Has a glitched button and window.
Recommended: Wondershare Filmora (originally Wondershare Video Editor)
Wondershare Filmora is a more advanced video editing tool which enables you to split, merge, crop and rotate as well as adding different video effects. This is a promising program that is worth trying.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
The growing demand of automated video splitting software provides the users several different options to make the best use of required feature. However, getting benefit of the available attributes is the second task to do; the first most important step is to select the best video splitting software. The purpose of using the video splitter is to slice the video into fragments; it is used to extract particular outlooks and upload to the internet; the splitting files can also be played back. However, this task can be performed through many video splitting tools but the user’s intention is to explore the best; for this purpose, a list of top 5 free MPEG video splitters are under discussion:
- Free Video Cutter
- Easy Video Splitter
- VidSplitter
- Avidemux
- MPEG Streamclip
- Recommended: Wondershare Filmora (originally Wondershare Video Editor)
Free Video Cutter
This video splitting software is a remarkable tools used to cut different kinds of videos, including MOV, MPEG-1, MPEG-2, WMN, AVI, MKV, MP3 and more. It is really easy-to-use and keeps the original video quality. Meanwhile, it provides different output options in accordance with the user’s expectations.
Pros:
- Supports multiple video formats;
- User friendly interface;
- Multiple output format options.
Cons:
- Lacks in sound quality;
- Fewer sound settings.
Easy Video Splitter
The main purpose of this software is to make parts or segments of the large video file into the smaller ones; it is a free applications used to split the files. The videos that cannot be fit into DVD and CD and need to be burnt, are cut or divide using easy video splitter. It supports multiple video formats both as input and output. The best thing about this tool is that it does not need any information from the user; he is supposed to select the way through which he wants to split the video, other functions are performed automatically by the software program.
Pros:
- User-friendly interface;
- Lightweight, portable and compatible;
- Maintains good quality of the input file;
- Sustains batch processing.
Cons:
- Expensive system requirements and resources.
VidSplitter
The users prefer VidSplitter to use because of its reliability and durability; it is used to convert large MPEG files into the fragments using several different formats. The large files in video formats such as MPEG, AVI, ASF and WMV are easily cut and assembled into numerous formats at fast speed. Furthermore, VidSplitter enables the users to save the processed file on storage media.
Pros:
- Easily-to-use interface;
- Splits and converts the clips at fast speed;
- Focuses on customization.
Cons:
- Help file is not available;
- Time-based selection strategy is not supported.
Avidemux
Supporting a variety of video formats such as AVI, DVD compatible MPEG files, MP4 and ASF, Avidemux helps the users split the videos in to small fragments. Tasks can be automated using projects, job queue and powerful scripting capabilities.
Pros:
- Different video editing options;
- Easy-to-use;
- Available on different platforms: Windows, Mac and Linux.
Cons:
- Outdated interface.
MPEG Streamclip
It is one of the leading video editing software programs for MPEG video files. It also supports various other video formats such as VOB, PS, M2P, MOD, VRO, DAT, MOV. It enables the users to split the large video files into small video clips in just few seconds.
Pros:
- Supports a wide range of video formats;
- Different video editing functions.
Cons:
- Has a glitched button and window.
Recommended: Wondershare Filmora (originally Wondershare Video Editor)
Wondershare Filmora is a more advanced video editing tool which enables you to split, merge, crop and rotate as well as adding different video effects. This is a promising program that is worth trying.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
The growing demand of automated video splitting software provides the users several different options to make the best use of required feature. However, getting benefit of the available attributes is the second task to do; the first most important step is to select the best video splitting software. The purpose of using the video splitter is to slice the video into fragments; it is used to extract particular outlooks and upload to the internet; the splitting files can also be played back. However, this task can be performed through many video splitting tools but the user’s intention is to explore the best; for this purpose, a list of top 5 free MPEG video splitters are under discussion:
- Free Video Cutter
- Easy Video Splitter
- VidSplitter
- Avidemux
- MPEG Streamclip
- Recommended: Wondershare Filmora (originally Wondershare Video Editor)
Free Video Cutter
This video splitting software is a remarkable tools used to cut different kinds of videos, including MOV, MPEG-1, MPEG-2, WMN, AVI, MKV, MP3 and more. It is really easy-to-use and keeps the original video quality. Meanwhile, it provides different output options in accordance with the user’s expectations.
Pros:
- Supports multiple video formats;
- User friendly interface;
- Multiple output format options.
Cons:
- Lacks in sound quality;
- Fewer sound settings.
Easy Video Splitter
The main purpose of this software is to make parts or segments of the large video file into the smaller ones; it is a free applications used to split the files. The videos that cannot be fit into DVD and CD and need to be burnt, are cut or divide using easy video splitter. It supports multiple video formats both as input and output. The best thing about this tool is that it does not need any information from the user; he is supposed to select the way through which he wants to split the video, other functions are performed automatically by the software program.
Pros:
- User-friendly interface;
- Lightweight, portable and compatible;
- Maintains good quality of the input file;
- Sustains batch processing.
Cons:
- Expensive system requirements and resources.
VidSplitter
The users prefer VidSplitter to use because of its reliability and durability; it is used to convert large MPEG files into the fragments using several different formats. The large files in video formats such as MPEG, AVI, ASF and WMV are easily cut and assembled into numerous formats at fast speed. Furthermore, VidSplitter enables the users to save the processed file on storage media.
Pros:
- Easily-to-use interface;
- Splits and converts the clips at fast speed;
- Focuses on customization.
Cons:
- Help file is not available;
- Time-based selection strategy is not supported.
Avidemux
Supporting a variety of video formats such as AVI, DVD compatible MPEG files, MP4 and ASF, Avidemux helps the users split the videos in to small fragments. Tasks can be automated using projects, job queue and powerful scripting capabilities.
Pros:
- Different video editing options;
- Easy-to-use;
- Available on different platforms: Windows, Mac and Linux.
Cons:
- Outdated interface.
MPEG Streamclip
It is one of the leading video editing software programs for MPEG video files. It also supports various other video formats such as VOB, PS, M2P, MOD, VRO, DAT, MOV. It enables the users to split the large video files into small video clips in just few seconds.
Pros:
- Supports a wide range of video formats;
- Different video editing functions.
Cons:
- Has a glitched button and window.
Recommended: Wondershare Filmora (originally Wondershare Video Editor)
Wondershare Filmora is a more advanced video editing tool which enables you to split, merge, crop and rotate as well as adding different video effects. This is a promising program that is worth trying.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
The growing demand of automated video splitting software provides the users several different options to make the best use of required feature. However, getting benefit of the available attributes is the second task to do; the first most important step is to select the best video splitting software. The purpose of using the video splitter is to slice the video into fragments; it is used to extract particular outlooks and upload to the internet; the splitting files can also be played back. However, this task can be performed through many video splitting tools but the user’s intention is to explore the best; for this purpose, a list of top 5 free MPEG video splitters are under discussion:
- Free Video Cutter
- Easy Video Splitter
- VidSplitter
- Avidemux
- MPEG Streamclip
- Recommended: Wondershare Filmora (originally Wondershare Video Editor)
Free Video Cutter
This video splitting software is a remarkable tools used to cut different kinds of videos, including MOV, MPEG-1, MPEG-2, WMN, AVI, MKV, MP3 and more. It is really easy-to-use and keeps the original video quality. Meanwhile, it provides different output options in accordance with the user’s expectations.
Pros:
- Supports multiple video formats;
- User friendly interface;
- Multiple output format options.
Cons:
- Lacks in sound quality;
- Fewer sound settings.
Easy Video Splitter
The main purpose of this software is to make parts or segments of the large video file into the smaller ones; it is a free applications used to split the files. The videos that cannot be fit into DVD and CD and need to be burnt, are cut or divide using easy video splitter. It supports multiple video formats both as input and output. The best thing about this tool is that it does not need any information from the user; he is supposed to select the way through which he wants to split the video, other functions are performed automatically by the software program.
Pros:
- User-friendly interface;
- Lightweight, portable and compatible;
- Maintains good quality of the input file;
- Sustains batch processing.
Cons:
- Expensive system requirements and resources.
VidSplitter
The users prefer VidSplitter to use because of its reliability and durability; it is used to convert large MPEG files into the fragments using several different formats. The large files in video formats such as MPEG, AVI, ASF and WMV are easily cut and assembled into numerous formats at fast speed. Furthermore, VidSplitter enables the users to save the processed file on storage media.
Pros:
- Easily-to-use interface;
- Splits and converts the clips at fast speed;
- Focuses on customization.
Cons:
- Help file is not available;
- Time-based selection strategy is not supported.
Avidemux
Supporting a variety of video formats such as AVI, DVD compatible MPEG files, MP4 and ASF, Avidemux helps the users split the videos in to small fragments. Tasks can be automated using projects, job queue and powerful scripting capabilities.
Pros:
- Different video editing options;
- Easy-to-use;
- Available on different platforms: Windows, Mac and Linux.
Cons:
- Outdated interface.
MPEG Streamclip
It is one of the leading video editing software programs for MPEG video files. It also supports various other video formats such as VOB, PS, M2P, MOD, VRO, DAT, MOV. It enables the users to split the large video files into small video clips in just few seconds.
Pros:
- Supports a wide range of video formats;
- Different video editing functions.
Cons:
- Has a glitched button and window.
Recommended: Wondershare Filmora (originally Wondershare Video Editor)
Wondershare Filmora is a more advanced video editing tool which enables you to split, merge, crop and rotate as well as adding different video effects. This is a promising program that is worth trying.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Final Cut Pro X: Freeze-Frames and Slow Motion
Final Cut Pro X: Freeze-Frames and Slow Motion
Benjamin Arango
Mar 27, 2024• Proven solutions
A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.
This article shows you how to do this using Final Cut Pro X.
For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.
Freeze-Frames and Slow Motion in Final Cut Pro X
1. STILL FRAMES
A still-frame freezes action. For instance, here is a clip of a hummingbird getting ready to land on a bird feeder. I want to create a freeze-frame of the bird in flight. (Um, yeah, I use “freeze-frame” and “still-frame” interchangeably.)
In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.
This creates a two-second freeze-frame at the position of the playhead.
Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.
In case you were wondering, this is what the freeze looks like. It freezes the flight of the hummingbird in the middle of playback, allowing us to add graphics or other text then resume the action as though nothing had happened.
Very cool, except….
Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.
So, here’s another way to do this.
Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.
This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.
Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.
As a connected clip, we can move this new freeze-frame wherever we want. However, be careful in moving the clip, because, unless you mark the original frame with a marker (type “M”), there’s no easy way to match the still frame with the source frame, once the still frame is moved somewhere else.
I use both these techniques in many different projects.
2. HOLD FRAME
A Hold Frame is similar to an in-line still frame, but with more flexibility.
Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).
This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.
Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.
Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.
To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.
NOTE: Changing the source frame is a feature that I like a LOT!
3. SLOW (or FAST) MOTION
We use slow-motion to show events that are too fast for the unaided eye to see. And fast motion to speed up very slow events. Both of these effects use what’s called a “constant speed change,” where the entire clip changes by the same amount - either faster or slower.
WE create either effect using the same tools, just different values. Here’s how.
Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).
Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)
Three things happen at once:
- The duration of the clip changes
- The orange Retiming bar appears over the top of the clip
- The speed of the clip changes
To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).
There are two ways to change the speed of a clip.
The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.
Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.
This opens a new dialog allowing a number of changes:
- Reverse. Plays the clip in reverse.
- Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
- Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
- Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.
You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.
4. EXTRA CREDIT
There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)
Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.
- Normal. This is the best choice for speeds of 50% or faster.
- Frame Blending. This is the best choice for speeds of about 20% to 50%.
- Optical Flow. This is the best choice for speeds slower than about 20%.
Frame blending puts a short dissolve between frames when running in slow motion to improve the illusion of motion. Optical Flow invents in-between frames to minimize the jerkiness of extremely slow motion.
Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.
This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
SUMMARY
Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.
This article shows you how to do this using Final Cut Pro X.
For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.
Freeze-Frames and Slow Motion in Final Cut Pro X
1. STILL FRAMES
A still-frame freezes action. For instance, here is a clip of a hummingbird getting ready to land on a bird feeder. I want to create a freeze-frame of the bird in flight. (Um, yeah, I use “freeze-frame” and “still-frame” interchangeably.)
In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.
This creates a two-second freeze-frame at the position of the playhead.
Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.
In case you were wondering, this is what the freeze looks like. It freezes the flight of the hummingbird in the middle of playback, allowing us to add graphics or other text then resume the action as though nothing had happened.
Very cool, except….
Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.
So, here’s another way to do this.
Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.
This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.
Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.
As a connected clip, we can move this new freeze-frame wherever we want. However, be careful in moving the clip, because, unless you mark the original frame with a marker (type “M”), there’s no easy way to match the still frame with the source frame, once the still frame is moved somewhere else.
I use both these techniques in many different projects.
2. HOLD FRAME
A Hold Frame is similar to an in-line still frame, but with more flexibility.
Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).
This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.
Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.
Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.
To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.
NOTE: Changing the source frame is a feature that I like a LOT!
3. SLOW (or FAST) MOTION
We use slow-motion to show events that are too fast for the unaided eye to see. And fast motion to speed up very slow events. Both of these effects use what’s called a “constant speed change,” where the entire clip changes by the same amount - either faster or slower.
WE create either effect using the same tools, just different values. Here’s how.
Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).
Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)
Three things happen at once:
- The duration of the clip changes
- The orange Retiming bar appears over the top of the clip
- The speed of the clip changes
To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).
There are two ways to change the speed of a clip.
The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.
Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.
This opens a new dialog allowing a number of changes:
- Reverse. Plays the clip in reverse.
- Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
- Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
- Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.
You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.
4. EXTRA CREDIT
There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)
Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.
- Normal. This is the best choice for speeds of 50% or faster.
- Frame Blending. This is the best choice for speeds of about 20% to 50%.
- Optical Flow. This is the best choice for speeds slower than about 20%.
Frame blending puts a short dissolve between frames when running in slow motion to improve the illusion of motion. Optical Flow invents in-between frames to minimize the jerkiness of extremely slow motion.
Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.
This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
SUMMARY
Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.
This article shows you how to do this using Final Cut Pro X.
For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.
Freeze-Frames and Slow Motion in Final Cut Pro X
1. STILL FRAMES
A still-frame freezes action. For instance, here is a clip of a hummingbird getting ready to land on a bird feeder. I want to create a freeze-frame of the bird in flight. (Um, yeah, I use “freeze-frame” and “still-frame” interchangeably.)
In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.
This creates a two-second freeze-frame at the position of the playhead.
Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.
In case you were wondering, this is what the freeze looks like. It freezes the flight of the hummingbird in the middle of playback, allowing us to add graphics or other text then resume the action as though nothing had happened.
Very cool, except….
Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.
So, here’s another way to do this.
Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.
This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.
Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.
As a connected clip, we can move this new freeze-frame wherever we want. However, be careful in moving the clip, because, unless you mark the original frame with a marker (type “M”), there’s no easy way to match the still frame with the source frame, once the still frame is moved somewhere else.
I use both these techniques in many different projects.
2. HOLD FRAME
A Hold Frame is similar to an in-line still frame, but with more flexibility.
Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).
This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.
Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.
Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.
To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.
NOTE: Changing the source frame is a feature that I like a LOT!
3. SLOW (or FAST) MOTION
We use slow-motion to show events that are too fast for the unaided eye to see. And fast motion to speed up very slow events. Both of these effects use what’s called a “constant speed change,” where the entire clip changes by the same amount - either faster or slower.
WE create either effect using the same tools, just different values. Here’s how.
Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).
Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)
Three things happen at once:
- The duration of the clip changes
- The orange Retiming bar appears over the top of the clip
- The speed of the clip changes
To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).
There are two ways to change the speed of a clip.
The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.
Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.
This opens a new dialog allowing a number of changes:
- Reverse. Plays the clip in reverse.
- Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
- Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
- Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.
You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.
4. EXTRA CREDIT
There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)
Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.
- Normal. This is the best choice for speeds of 50% or faster.
- Frame Blending. This is the best choice for speeds of about 20% to 50%.
- Optical Flow. This is the best choice for speeds slower than about 20%.
Frame blending puts a short dissolve between frames when running in slow motion to improve the illusion of motion. Optical Flow invents in-between frames to minimize the jerkiness of extremely slow motion.
Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.
This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
SUMMARY
Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.
This article shows you how to do this using Final Cut Pro X.
For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.
Freeze-Frames and Slow Motion in Final Cut Pro X
1. STILL FRAMES
A still-frame freezes action. For instance, here is a clip of a hummingbird getting ready to land on a bird feeder. I want to create a freeze-frame of the bird in flight. (Um, yeah, I use “freeze-frame” and “still-frame” interchangeably.)
In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.
This creates a two-second freeze-frame at the position of the playhead.
Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.
In case you were wondering, this is what the freeze looks like. It freezes the flight of the hummingbird in the middle of playback, allowing us to add graphics or other text then resume the action as though nothing had happened.
Very cool, except….
Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.
So, here’s another way to do this.
Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.
This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.
Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.
As a connected clip, we can move this new freeze-frame wherever we want. However, be careful in moving the clip, because, unless you mark the original frame with a marker (type “M”), there’s no easy way to match the still frame with the source frame, once the still frame is moved somewhere else.
I use both these techniques in many different projects.
2. HOLD FRAME
A Hold Frame is similar to an in-line still frame, but with more flexibility.
Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).
This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.
Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.
Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.
To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.
NOTE: Changing the source frame is a feature that I like a LOT!
3. SLOW (or FAST) MOTION
We use slow-motion to show events that are too fast for the unaided eye to see. And fast motion to speed up very slow events. Both of these effects use what’s called a “constant speed change,” where the entire clip changes by the same amount - either faster or slower.
WE create either effect using the same tools, just different values. Here’s how.
Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).
Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)
Three things happen at once:
- The duration of the clip changes
- The orange Retiming bar appears over the top of the clip
- The speed of the clip changes
To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).
There are two ways to change the speed of a clip.
The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.
Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.
This opens a new dialog allowing a number of changes:
- Reverse. Plays the clip in reverse.
- Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
- Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
- Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.
You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.
4. EXTRA CREDIT
There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)
Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.
- Normal. This is the best choice for speeds of 50% or faster.
- Frame Blending. This is the best choice for speeds of about 20% to 50%.
- Optical Flow. This is the best choice for speeds slower than about 20%.
Frame blending puts a short dissolve between frames when running in slow motion to improve the illusion of motion. Optical Flow invents in-between frames to minimize the jerkiness of extremely slow motion.
Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.
This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
SUMMARY
Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Create a Sense of Speed: Motion Blur in Final Cut Pro
Wondershare Filmora
Create stunning effects with simple clicks.
Motion blur is the visual smearing or streaking caught on camera from the subject’s movement, camera, or both. The human eye notices motion blur in real life naturally. So, a subtle blur in movies and videos makes them look more reality based.
Final Cut Pro does not have a built-in Motion Blur Effect. But there are several software and websites that allow you to add a blur effect. You need to buy the plugins and templates that will help you create this effect. In this article, we have talked about how to add the Motion Blur Effect to Final Cut Pro with the help of different templates. Without further ado, let’s hop into it!
In this article
01 How to Add Motion Blur in FCPX?
02 How to Do Motion Blur in Easy Way?
03 Motion Blur Plugins or Templates for FCPX [Free＆Paid]
04 Motion Blur Effect in Filmmaking
Part1: How to Add Motion Blur in FCPX?
Usually most people would use several software and websites to add Motion Blur, but there’s also a way to add the blur effect in FCPX. Follow the steps below to add motion blur in FCPX.
Step1Add an Adjustment Layer
Select Title from the above menu, a drop-down with several options will appear. Find the one with the adjustment layer’s name and click on it. Drag the Adjustment Layer to timeline and expand it to the whole length or the specific part of the video. Adjust the settings from the menu at the left of the view.
Note: You must download the adjustment layer first. Generally, you will find the recently added adjustment layer in the Custom option.
Step2Apply Transformation Effect
Select Transformation from the bottom left of the view, a drop-down menu will appear. Now, select Transform from it. You will see a white with several blue dots surrounding the view. You can use these blue dots to Flip, Rotate, and Adjust the position of the view screen.
Step3Apply Keyframing and Motion Blur
While you are in the Transformation window, you will see a menu on the right of your view. From that menu, you can apply keyframing by adjusting Position, Rotate, and Scale under the Transform tab.
Note: Select the part of the video you want to apply keyframing on first.
Select the Title option from the above menu. Another menu will appear; select Motion Blur from it and apply the motion blur on video by dragging the effect to the timeline. To smooth it out, select Modify from the top and pick Random Selection from it.
Speed up your video first by selecting the third option from the left bottom of the view. A drop-down menu will appear; choose Reset Speed. A Green bar will appear on the top of the timeline; click on it and select Fast to speed up the video. Moreover, you will have to download the Motion Blur plugin.
Part2: How to Do Motion Blur in Easy Way?
The motion needs a sufficient amount of blur. It happens with our natural perception as well. For example, if something moves too quickly, it appears blur to our eyes. So, it must be the right amount of blur.
To tackle this problem, we add motion blur to make it look more natural and reality based. It provides the natural smearing we see when something moves too quickly but not when shooting the video. To add this effect, you can use powerful editing software such as Wondershare Filmora. Follow the below steps to add a blur effect to your video on Filmora.
For Win 7 or later (64-bit)
For macOS 10.12 or later
Step1Launch Filmora
Launch Filmora on your device and import it. Now, click on the video and drag it to Fimora’s Timeline and play it.
Step2Split the Video
Split the video by stopping it from where you want the motion blur to start. Play it again. Now, stop and split the video from where you want the effect to stop.
Step3Search Blur
Now, select the video portion you have split and click on the Effects option from the above menu—search Blur on it. You will see multiple blur effects, select one from there and Drag it to the middle part of the video. Play the video to see the motion blur.
**Note:**Select the part of the video you want to apply keyframing on first.
Step4Apply Transition
Now, select the video portion you have split and click on the Effects option from the above menu—search Blur on it. You will see multiple blur effects, select one from there and Drag it to the middle part of the video. Play the video to see the motion blur.
Part3: Motion Blur Plugins or Templates for FCPX [Free＆Paid]
Many people believe that Final Cut Pro X lacks a little when it comes to editing tools. However, if you know the perfect plugin for your requirement, Final Cut Pro X can prove to be an entirely different tool. So, we have compiled some of the best plugins for it.
| Name | Fearture | Free/paid |
|---|---|---|
| Color Finale 2.0 | Color Grading | Free |
| Motion Blur Plugin | Add Motion Blur | Free |
| Distortion Effects | Add distortions to the image | Free |
| Alex 4D Wide Angle Fix | Removes Distortion | Free |
| Final Cut Pro Plugins & Templates by Motion Array | Contains Hundreds of Templates | Paid |
| Track X by Mocha | Tracks the motion of subjects | Paid |
| Loudness Meter bu Youlean | Make the loudest parts audible | Paid |
| Easy Tracker by CrumblePop | Add texts, graphics, and titles with the subject | Paid |
Color Finale 2.0 [Free]
Color Finale 2.0 is a color grading software that is specially designed for FCPX. It has opened up a gateway for professionals and starters to color grade their videos quickly and efficiently.
Alex 4D Wide Angle Fix [Free]
One of the significant issues in wide-angle shots is distortion. It can occur as the edges of the frame are bending. So, this Alex 4D Wide Angle Fix helps to remove this distortion from wide-angle shots.
Motion Blur Plugin [Free]
This plugin helps you to add varying motion blur to moving subjects in a video. This makes it perfect for quick-moving graphics, time-lapses, etc. Once FCPX got the plugin, it is easy to use it.
Distortion Effects [Free]
Distortion Effects help you in adding distortions such as twirling, zigzagging, or bulging to your image. This plugin is specific and used for creating an experimental film or a scene in which distortion is necessary. It can also be creatively applied in transitions.
Final Cut Pro Plugins & Templates by Motion Array [Paid]
Motion Array is a website that contains hundreds of plugins and templates for Final Cut Pro. The range of templates has everything that you need. So, download the motion blur template, and you are all set.
Track X by Mocha [Paid]
It is an excellent plugin with tracking functionality one might otherwise rely on Motion or After Effects to produce. It allows you to track the subject’s motion with graphics, texts, or even by the green screen in six ways.
Loudness Meter bu Youlean [Paid]
Youlean Meter recognizes the audio’s loudest parts and brings them within an acceptable limit for streaming and broadcasting. It prevents the loss of ineligibility and quality for platforms because of various regulations and legal standards.
Easy Tracker by CrumblePop [Paid]
It is a simple plugin that helps you track the subject’s motion with the help of titles, graphics, or texts. This plugin works the same as Track X, but it does not support a green screen in the same way. It is ideal if you want to add text tags.
Part4: Motion Blur Effect in Filmmaking
Motion Blur is one of the essential effects to add when you are making a movie. It exaggerates the motion in a perfect way which is necessary for most action movies. This blur effect is usually the result of something moving quicker than the camera. The more significant the speed difference between the camera filming and the moving object, the more pronounced motion blur will be.
In the majority of the cases, it is best to apply motion blur on background objects than the subjects. For example, motion blur is perfect for the shots in which the camera moves at the same speed as the subject. Although, if the subject is moving faster than the camera, you would want a minimal blur.
Technically speaking, more excellent motion blur can be obtained through a lower shutter speed or vice versa. Ensure that your shutter speed is always twice your framerate because anything lower can result in unnatural-looking footage. The famous bike chase of Star Wars Episode VI is a perfect example of the productive application of motion blur. The scene was captured by walking in the forest and shooting a single frame per time.
Conclusion
Most of the videos need a significant amount of blur to make them look realistic. FCPX is excellent editing software, but it does not have blurring effects. However, there’s a way to add blur effect in FCPX, but many people are unaware of it.
To tackle this problem, we came up with different plugins for Motion Blur and its effects in filmmaking. So, now you have in-depth knowledge of how you can add blur effects in FCPX.
Wondershare Filmora
Do motion blur effect easily with Filmora!
Try It Free Try It Free Try It Free Learn More >
Motion blur is the visual smearing or streaking caught on camera from the subject’s movement, camera, or both. The human eye notices motion blur in real life naturally. So, a subtle blur in movies and videos makes them look more reality based.
Final Cut Pro does not have a built-in Motion Blur Effect. But there are several software and websites that allow you to add a blur effect. You need to buy the plugins and templates that will help you create this effect. In this article, we have talked about how to add the Motion Blur Effect to Final Cut Pro with the help of different templates. Without further ado, let’s hop into it!
In this article
01 How to Add Motion Blur in FCPX?
02 How to Do Motion Blur in Easy Way?
03 Motion Blur Plugins or Templates for FCPX [Free＆Paid]
04 Motion Blur Effect in Filmmaking
Part1: How to Add Motion Blur in FCPX?
Usually most people would use several software and websites to add Motion Blur, but there’s also a way to add the blur effect in FCPX. Follow the steps below to add motion blur in FCPX.
Step1Add an Adjustment Layer
Select Title from the above menu, a drop-down with several options will appear. Find the one with the adjustment layer’s name and click on it. Drag the Adjustment Layer to timeline and expand it to the whole length or the specific part of the video. Adjust the settings from the menu at the left of the view.
Note: You must download the adjustment layer first. Generally, you will find the recently added adjustment layer in the Custom option.
Step2Apply Transformation Effect
Select Transformation from the bottom left of the view, a drop-down menu will appear. Now, select Transform from it. You will see a white with several blue dots surrounding the view. You can use these blue dots to Flip, Rotate, and Adjust the position of the view screen.
Step3Apply Keyframing and Motion Blur
While you are in the Transformation window, you will see a menu on the right of your view. From that menu, you can apply keyframing by adjusting Position, Rotate, and Scale under the Transform tab.
Note: Select the part of the video you want to apply keyframing on first.
Select the Title option from the above menu. Another menu will appear; select Motion Blur from it and apply the motion blur on video by dragging the effect to the timeline. To smooth it out, select Modify from the top and pick Random Selection from it.
Speed up your video first by selecting the third option from the left bottom of the view. A drop-down menu will appear; choose Reset Speed. A Green bar will appear on the top of the timeline; click on it and select Fast to speed up the video. Moreover, you will have to download the Motion Blur plugin.
Part2: How to Do Motion Blur in Easy Way?
The motion needs a sufficient amount of blur. It happens with our natural perception as well. For example, if something moves too quickly, it appears blur to our eyes. So, it must be the right amount of blur.
To tackle this problem, we add motion blur to make it look more natural and reality based. It provides the natural smearing we see when something moves too quickly but not when shooting the video. To add this effect, you can use powerful editing software such as Wondershare Filmora. Follow the below steps to add a blur effect to your video on Filmora.
For Win 7 or later (64-bit)
For macOS 10.12 or later
Step1Launch Filmora
Launch Filmora on your device and import it. Now, click on the video and drag it to Fimora’s Timeline and play it.
Step2Split the Video
Split the video by stopping it from where you want the motion blur to start. Play it again. Now, stop and split the video from where you want the effect to stop.
Step3Search Blur
Now, select the video portion you have split and click on the Effects option from the above menu—search Blur on it. You will see multiple blur effects, select one from there and Drag it to the middle part of the video. Play the video to see the motion blur.
**Note:**Select the part of the video you want to apply keyframing on first.
Step4Apply Transition
Now, select the video portion you have split and click on the Effects option from the above menu—search Blur on it. You will see multiple blur effects, select one from there and Drag it to the middle part of the video. Play the video to see the motion blur.
Part3: Motion Blur Plugins or Templates for FCPX [Free＆Paid]
Many people believe that Final Cut Pro X lacks a little when it comes to editing tools. However, if you know the perfect plugin for your requirement, Final Cut Pro X can prove to be an entirely different tool. So, we have compiled some of the best plugins for it.
| Name | Fearture | Free/paid |
|---|---|---|
| Color Finale 2.0 | Color Grading | Free |
| Motion Blur Plugin | Add Motion Blur | Free |
| Distortion Effects | Add distortions to the image | Free |
| Alex 4D Wide Angle Fix | Removes Distortion | Free |
| Final Cut Pro Plugins & Templates by Motion Array | Contains Hundreds of Templates | Paid |
| Track X by Mocha | Tracks the motion of subjects | Paid |
| Loudness Meter bu Youlean | Make the loudest parts audible | Paid |
| Easy Tracker by CrumblePop | Add texts, graphics, and titles with the subject | Paid |
Color Finale 2.0 [Free]
Color Finale 2.0 is a color grading software that is specially designed for FCPX. It has opened up a gateway for professionals and starters to color grade their videos quickly and efficiently.
Alex 4D Wide Angle Fix [Free]
One of the significant issues in wide-angle shots is distortion. It can occur as the edges of the frame are bending. So, this Alex 4D Wide Angle Fix helps to remove this distortion from wide-angle shots.
Motion Blur Plugin [Free]
This plugin helps you to add varying motion blur to moving subjects in a video. This makes it perfect for quick-moving graphics, time-lapses, etc. Once FCPX got the plugin, it is easy to use it.
Distortion Effects [Free]
Distortion Effects help you in adding distortions such as twirling, zigzagging, or bulging to your image. This plugin is specific and used for creating an experimental film or a scene in which distortion is necessary. It can also be creatively applied in transitions.
Final Cut Pro Plugins & Templates by Motion Array [Paid]
Motion Array is a website that contains hundreds of plugins and templates for Final Cut Pro. The range of templates has everything that you need. So, download the motion blur template, and you are all set.
Track X by Mocha [Paid]
It is an excellent plugin with tracking functionality one might otherwise rely on Motion or After Effects to produce. It allows you to track the subject’s motion with graphics, texts, or even by the green screen in six ways.
Loudness Meter bu Youlean [Paid]
Youlean Meter recognizes the audio’s loudest parts and brings them within an acceptable limit for streaming and broadcasting. It prevents the loss of ineligibility and quality for platforms because of various regulations and legal standards.
Easy Tracker by CrumblePop [Paid]
It is a simple plugin that helps you track the subject’s motion with the help of titles, graphics, or texts. This plugin works the same as Track X, but it does not support a green screen in the same way. It is ideal if you want to add text tags.
Part4: Motion Blur Effect in Filmmaking
Motion Blur is one of the essential effects to add when you are making a movie. It exaggerates the motion in a perfect way which is necessary for most action movies. This blur effect is usually the result of something moving quicker than the camera. The more significant the speed difference between the camera filming and the moving object, the more pronounced motion blur will be.
In the majority of the cases, it is best to apply motion blur on background objects than the subjects. For example, motion blur is perfect for the shots in which the camera moves at the same speed as the subject. Although, if the subject is moving faster than the camera, you would want a minimal blur.
Technically speaking, more excellent motion blur can be obtained through a lower shutter speed or vice versa. Ensure that your shutter speed is always twice your framerate because anything lower can result in unnatural-looking footage. The famous bike chase of Star Wars Episode VI is a perfect example of the productive application of motion blur. The scene was captured by walking in the forest and shooting a single frame per time.
Conclusion
Most of the videos need a significant amount of blur to make them look realistic. FCPX is excellent editing software, but it does not have blurring effects. However, there’s a way to add blur effect in FCPX, but many people are unaware of it.
To tackle this problem, we came up with different plugins for Motion Blur and its effects in filmmaking. So, now you have in-depth knowledge of how you can add blur effects in FCPX.
Wondershare Filmora
Do motion blur effect easily with Filmora!
Try It Free Try It Free Try It Free Learn More >
Motion blur is the visual smearing or streaking caught on camera from the subject’s movement, camera, or both. The human eye notices motion blur in real life naturally. So, a subtle blur in movies and videos makes them look more reality based.
Final Cut Pro does not have a built-in Motion Blur Effect. But there are several software and websites that allow you to add a blur effect. You need to buy the plugins and templates that will help you create this effect. In this article, we have talked about how to add the Motion Blur Effect to Final Cut Pro with the help of different templates. Without further ado, let’s hop into it!
In this article
01 How to Add Motion Blur in FCPX?
02 How to Do Motion Blur in Easy Way?
03 Motion Blur Plugins or Templates for FCPX [Free＆Paid]
04 Motion Blur Effect in Filmmaking
Part1: How to Add Motion Blur in FCPX?
Usually most people would use several software and websites to add Motion Blur, but there’s also a way to add the blur effect in FCPX. Follow the steps below to add motion blur in FCPX.
Step1Add an Adjustment Layer
Select Title from the above menu, a drop-down with several options will appear. Find the one with the adjustment layer’s name and click on it. Drag the Adjustment Layer to timeline and expand it to the whole length or the specific part of the video. Adjust the settings from the menu at the left of the view.
Note: You must download the adjustment layer first. Generally, you will find the recently added adjustment layer in the Custom option.
Step2Apply Transformation Effect
Select Transformation from the bottom left of the view, a drop-down menu will appear. Now, select Transform from it. You will see a white with several blue dots surrounding the view. You can use these blue dots to Flip, Rotate, and Adjust the position of the view screen.
Step3Apply Keyframing and Motion Blur
While you are in the Transformation window, you will see a menu on the right of your view. From that menu, you can apply keyframing by adjusting Position, Rotate, and Scale under the Transform tab.
Note: Select the part of the video you want to apply keyframing on first.
Select the Title option from the above menu. Another menu will appear; select Motion Blur from it and apply the motion blur on video by dragging the effect to the timeline. To smooth it out, select Modify from the top and pick Random Selection from it.
Speed up your video first by selecting the third option from the left bottom of the view. A drop-down menu will appear; choose Reset Speed. A Green bar will appear on the top of the timeline; click on it and select Fast to speed up the video. Moreover, you will have to download the Motion Blur plugin.
Part2: How to Do Motion Blur in Easy Way?
The motion needs a sufficient amount of blur. It happens with our natural perception as well. For example, if something moves too quickly, it appears blur to our eyes. So, it must be the right amount of blur.
To tackle this problem, we add motion blur to make it look more natural and reality based. It provides the natural smearing we see when something moves too quickly but not when shooting the video. To add this effect, you can use powerful editing software such as Wondershare Filmora. Follow the below steps to add a blur effect to your video on Filmora.
For Win 7 or later (64-bit)
For macOS 10.12 or later
Step1Launch Filmora
Launch Filmora on your device and import it. Now, click on the video and drag it to Fimora’s Timeline and play it.
Step2Split the Video
Split the video by stopping it from where you want the motion blur to start. Play it again. Now, stop and split the video from where you want the effect to stop.
Step3Search Blur
Now, select the video portion you have split and click on the Effects option from the above menu—search Blur on it. You will see multiple blur effects, select one from there and Drag it to the middle part of the video. Play the video to see the motion blur.
**Note:**Select the part of the video you want to apply keyframing on first.
Step4Apply Transition
Now, select the video portion you have split and click on the Effects option from the above menu—search Blur on it. You will see multiple blur effects, select one from there and Drag it to the middle part of the video. Play the video to see the motion blur.
Part3: Motion Blur Plugins or Templates for FCPX [Free＆Paid]
Many people believe that Final Cut Pro X lacks a little when it comes to editing tools. However, if you know the perfect plugin for your requirement, Final Cut Pro X can prove to be an entirely different tool. So, we have compiled some of the best plugins for it.
| Name | Fearture | Free/paid |
|---|---|---|
| Color Finale 2.0 | Color Grading | Free |
| Motion Blur Plugin | Add Motion Blur | Free |
| Distortion Effects | Add distortions to the image | Free |
| Alex 4D Wide Angle Fix | Removes Distortion | Free |
| Final Cut Pro Plugins & Templates by Motion Array | Contains Hundreds of Templates | Paid |
| Track X by Mocha | Tracks the motion of subjects | Paid |
| Loudness Meter bu Youlean | Make the loudest parts audible | Paid |
| Easy Tracker by CrumblePop | Add texts, graphics, and titles with the subject | Paid |
Color Finale 2.0 [Free]
Color Finale 2.0 is a color grading software that is specially designed for FCPX. It has opened up a gateway for professionals and starters to color grade their videos quickly and efficiently.
Alex 4D Wide Angle Fix [Free]
One of the significant issues in wide-angle shots is distortion. It can occur as the edges of the frame are bending. So, this Alex 4D Wide Angle Fix helps to remove this distortion from wide-angle shots.
Motion Blur Plugin [Free]
This plugin helps you to add varying motion blur to moving subjects in a video. This makes it perfect for quick-moving graphics, time-lapses, etc. Once FCPX got the plugin, it is easy to use it.
Distortion Effects [Free]
Distortion Effects help you in adding distortions such as twirling, zigzagging, or bulging to your image. This plugin is specific and used for creating an experimental film or a scene in which distortion is necessary. It can also be creatively applied in transitions.
Final Cut Pro Plugins & Templates by Motion Array [Paid]
Motion Array is a website that contains hundreds of plugins and templates for Final Cut Pro. The range of templates has everything that you need. So, download the motion blur template, and you are all set.
Track X by Mocha [Paid]
It is an excellent plugin with tracking functionality one might otherwise rely on Motion or After Effects to produce. It allows you to track the subject’s motion with graphics, texts, or even by the green screen in six ways.
Loudness Meter bu Youlean [Paid]
Youlean Meter recognizes the audio’s loudest parts and brings them within an acceptable limit for streaming and broadcasting. It prevents the loss of ineligibility and quality for platforms because of various regulations and legal standards.
Easy Tracker by CrumblePop [Paid]
It is a simple plugin that helps you track the subject’s motion with the help of titles, graphics, or texts. This plugin works the same as Track X, but it does not support a green screen in the same way. It is ideal if you want to add text tags.
Part4: Motion Blur Effect in Filmmaking
Motion Blur is one of the essential effects to add when you are making a movie. It exaggerates the motion in a perfect way which is necessary for most action movies. This blur effect is usually the result of something moving quicker than the camera. The more significant the speed difference between the camera filming and the moving object, the more pronounced motion blur will be.
In the majority of the cases, it is best to apply motion blur on background objects than the subjects. For example, motion blur is perfect for the shots in which the camera moves at the same speed as the subject. Although, if the subject is moving faster than the camera, you would want a minimal blur.
Technically speaking, more excellent motion blur can be obtained through a lower shutter speed or vice versa. Ensure that your shutter speed is always twice your framerate because anything lower can result in unnatural-looking footage. The famous bike chase of Star Wars Episode VI is a perfect example of the productive application of motion blur. The scene was captured by walking in the forest and shooting a single frame per time.
Conclusion
Most of the videos need a significant amount of blur to make them look realistic. FCPX is excellent editing software, but it does not have blurring effects. However, there’s a way to add blur effect in FCPX, but many people are unaware of it.
To tackle this problem, we came up with different plugins for Motion Blur and its effects in filmmaking. So, now you have in-depth knowledge of how you can add blur effects in FCPX.
Wondershare Filmora
Do motion blur effect easily with Filmora!
Try It Free Try It Free Try It Free Learn More >
Motion blur is the visual smearing or streaking caught on camera from the subject’s movement, camera, or both. The human eye notices motion blur in real life naturally. So, a subtle blur in movies and videos makes them look more reality based.
Final Cut Pro does not have a built-in Motion Blur Effect. But there are several software and websites that allow you to add a blur effect. You need to buy the plugins and templates that will help you create this effect. In this article, we have talked about how to add the Motion Blur Effect to Final Cut Pro with the help of different templates. Without further ado, let’s hop into it!
In this article
01 How to Add Motion Blur in FCPX?
02 How to Do Motion Blur in Easy Way?
03 Motion Blur Plugins or Templates for FCPX [Free＆Paid]
04 Motion Blur Effect in Filmmaking
Part1: How to Add Motion Blur in FCPX?
Usually most people would use several software and websites to add Motion Blur, but there’s also a way to add the blur effect in FCPX. Follow the steps below to add motion blur in FCPX.
Step1Add an Adjustment Layer
Select Title from the above menu, a drop-down with several options will appear. Find the one with the adjustment layer’s name and click on it. Drag the Adjustment Layer to timeline and expand it to the whole length or the specific part of the video. Adjust the settings from the menu at the left of the view.
Note: You must download the adjustment layer first. Generally, you will find the recently added adjustment layer in the Custom option.
Step2Apply Transformation Effect
Select Transformation from the bottom left of the view, a drop-down menu will appear. Now, select Transform from it. You will see a white with several blue dots surrounding the view. You can use these blue dots to Flip, Rotate, and Adjust the position of the view screen.
Step3Apply Keyframing and Motion Blur
While you are in the Transformation window, you will see a menu on the right of your view. From that menu, you can apply keyframing by adjusting Position, Rotate, and Scale under the Transform tab.
Note: Select the part of the video you want to apply keyframing on first.
Select the Title option from the above menu. Another menu will appear; select Motion Blur from it and apply the motion blur on video by dragging the effect to the timeline. To smooth it out, select Modify from the top and pick Random Selection from it.
Speed up your video first by selecting the third option from the left bottom of the view. A drop-down menu will appear; choose Reset Speed. A Green bar will appear on the top of the timeline; click on it and select Fast to speed up the video. Moreover, you will have to download the Motion Blur plugin.
Part2: How to Do Motion Blur in Easy Way?
The motion needs a sufficient amount of blur. It happens with our natural perception as well. For example, if something moves too quickly, it appears blur to our eyes. So, it must be the right amount of blur.
To tackle this problem, we add motion blur to make it look more natural and reality based. It provides the natural smearing we see when something moves too quickly but not when shooting the video. To add this effect, you can use powerful editing software such as Wondershare Filmora. Follow the below steps to add a blur effect to your video on Filmora.
For Win 7 or later (64-bit)
For macOS 10.12 or later
Step1Launch Filmora
Launch Filmora on your device and import it. Now, click on the video and drag it to Fimora’s Timeline and play it.
Step2Split the Video
Split the video by stopping it from where you want the motion blur to start. Play it again. Now, stop and split the video from where you want the effect to stop.
Step3Search Blur
Now, select the video portion you have split and click on the Effects option from the above menu—search Blur on it. You will see multiple blur effects, select one from there and Drag it to the middle part of the video. Play the video to see the motion blur.
**Note:**Select the part of the video you want to apply keyframing on first.
Step4Apply Transition
Now, select the video portion you have split and click on the Effects option from the above menu—search Blur on it. You will see multiple blur effects, select one from there and Drag it to the middle part of the video. Play the video to see the motion blur.
Part3: Motion Blur Plugins or Templates for FCPX [Free＆Paid]
Many people believe that Final Cut Pro X lacks a little when it comes to editing tools. However, if you know the perfect plugin for your requirement, Final Cut Pro X can prove to be an entirely different tool. So, we have compiled some of the best plugins for it.
| Name | Fearture | Free/paid |
|---|---|---|
| Color Finale 2.0 | Color Grading | Free |
| Motion Blur Plugin | Add Motion Blur | Free |
| Distortion Effects | Add distortions to the image | Free |
| Alex 4D Wide Angle Fix | Removes Distortion | Free |
| Final Cut Pro Plugins & Templates by Motion Array | Contains Hundreds of Templates | Paid |
| Track X by Mocha | Tracks the motion of subjects | Paid |
| Loudness Meter bu Youlean | Make the loudest parts audible | Paid |
| Easy Tracker by CrumblePop | Add texts, graphics, and titles with the subject | Paid |
Color Finale 2.0 [Free]
Color Finale 2.0 is a color grading software that is specially designed for FCPX. It has opened up a gateway for professionals and starters to color grade their videos quickly and efficiently.
Alex 4D Wide Angle Fix [Free]
One of the significant issues in wide-angle shots is distortion. It can occur as the edges of the frame are bending. So, this Alex 4D Wide Angle Fix helps to remove this distortion from wide-angle shots.
Motion Blur Plugin [Free]
This plugin helps you to add varying motion blur to moving subjects in a video. This makes it perfect for quick-moving graphics, time-lapses, etc. Once FCPX got the plugin, it is easy to use it.
Distortion Effects [Free]
Distortion Effects help you in adding distortions such as twirling, zigzagging, or bulging to your image. This plugin is specific and used for creating an experimental film or a scene in which distortion is necessary. It can also be creatively applied in transitions.
Final Cut Pro Plugins & Templates by Motion Array [Paid]
Motion Array is a website that contains hundreds of plugins and templates for Final Cut Pro. The range of templates has everything that you need. So, download the motion blur template, and you are all set.
Track X by Mocha [Paid]
It is an excellent plugin with tracking functionality one might otherwise rely on Motion or After Effects to produce. It allows you to track the subject’s motion with graphics, texts, or even by the green screen in six ways.
Loudness Meter bu Youlean [Paid]
Youlean Meter recognizes the audio’s loudest parts and brings them within an acceptable limit for streaming and broadcasting. It prevents the loss of ineligibility and quality for platforms because of various regulations and legal standards.
Easy Tracker by CrumblePop [Paid]
It is a simple plugin that helps you track the subject’s motion with the help of titles, graphics, or texts. This plugin works the same as Track X, but it does not support a green screen in the same way. It is ideal if you want to add text tags.
Part4: Motion Blur Effect in Filmmaking
Motion Blur is one of the essential effects to add when you are making a movie. It exaggerates the motion in a perfect way which is necessary for most action movies. This blur effect is usually the result of something moving quicker than the camera. The more significant the speed difference between the camera filming and the moving object, the more pronounced motion blur will be.
In the majority of the cases, it is best to apply motion blur on background objects than the subjects. For example, motion blur is perfect for the shots in which the camera moves at the same speed as the subject. Although, if the subject is moving faster than the camera, you would want a minimal blur.
Technically speaking, more excellent motion blur can be obtained through a lower shutter speed or vice versa. Ensure that your shutter speed is always twice your framerate because anything lower can result in unnatural-looking footage. The famous bike chase of Star Wars Episode VI is a perfect example of the productive application of motion blur. The scene was captured by walking in the forest and shooting a single frame per time.
Conclusion
Most of the videos need a significant amount of blur to make them look realistic. FCPX is excellent editing software, but it does not have blurring effects. However, there’s a way to add blur effect in FCPX, but many people are unaware of it.
To tackle this problem, we came up with different plugins for Motion Blur and its effects in filmmaking. So, now you have in-depth knowledge of how you can add blur effects in FCPX.
Wondershare Filmora
Do motion blur effect easily with Filmora!
Try It Free Try It Free Try It Free Learn More >
Also read:
- New Get More Out of FCPX Top 10 Plugins to Enhance Your Video Editing Experience
- 2024 Approved The Most Popular 3D Video Making Tools Among Professionals
- New Mac Users, Rejoice! 10 Top-Rated Vegas Pro Alternatives for Video Editing
- Updated 2024 Approved Screen Format Options on Amazon Prime
- 2024 Approved Unlock the Power of Slow Motion Free Video Editing Software - Filmora
- Updated Mastering Video Editing A Guide for Sony Camcorder Footage
- Cut, Trim, and Polish The Best Video Editors for Windows 11 (Free & Paid)
- Updated M4R Conversion Basics A Beginners Checklist for 2024
- New In 2024, The Ultimate Video Effects Guide Transform Your Footage
- New Steady as a Rock How to Stabilize Your Videos in Adobe Premiere Pro
- Updated Top Time-Lapse Video Editors Free and Paid Options
- Updated Unbiased Review Sony Vegas vs Adobe Premiere Pro - Which One Is Right for You, In 2024
- Unlock Final Cut Pro at a Steal Explore Education Discounts
- Updated Green Screen Editing on a Mac Software Comparison and Recommendations
- The Art of Text-to-Speech Conversion Insider Secrets and Best Practices for 2024
- Updated Break Free From Adobe 10 Innovative Premiere Elements Alternatives
- Updated 2024 Approved Home Movie Mastery Ezvid for Mac Makes Video Creation a Breeze
- Updated The Ultimate List Top 10 Free Video Trimmers for Windows 10
- Updated Get Creative with Slow Motion Tips and Tricks for Windows Live Movie Maker Users
- In 2024, How to Slice 3GP Videos Into Smaller Clips 2023 Tutorial
- Updated 20 Must-Know Adobe Premiere Pro Shortcuts for Editors for 2024
- New In 2024, Elevate Your Brand 10 Top-Rated Animated Text Generators
- New 2024 Approved Make Amazing Videos on Your Mac Top-Rated Video Editing Tools
- 2024 Approved Windows Movie Making Made Easy Top 7 Editor Options
- Updated 2024 Approved Best Free iPhone Video Rotation Apps Top Picks
- New Final Cut Pro X Troubleshooting Handbook Fixing Common Issues
- Bring Your Videos to Life Top-Rated 1080P Video Editors for 2024
- Updated 2024 Approved The Aspect Ratio Advantage How to Optimize Your YouTube Videos for Maximum Impact
- Mastering FCP 5 Essential Editing Tricks to Elevate Your Workflow for 2024
- 2024 Approved Mobile Video Magic Best Apps for Animating Text on Your Phone
- Unbiased Review How to Obtain Filmora Without Resorting to Piracy for 2024
- New In 2024, Introductory Video Editing Software A Beginners Guide
- 2024 Approved Aspect Ratio Adjustment in a Flash A Quick Guide
- Updated Convert Like a Pro Insider Secrets for Text to MP3
- Easily Cut Large Videos Faster on Mac for 2024
- Updated Premiere on Linux? No Problem! Top 10 Alternative Video Editors
- Updated 2024 Approved Unleash the Power of FCPX Plugins Troubleshooting and Fixing Common Issues
- In 2024, The Best Android SIM Unlock Code Generators Unlock Your Samsung Galaxy XCover 7 Phone Hassle-Free
- In 2024, How to Track WhatsApp Messages on Vivo X Fold 2 Without Them Knowing? | Dr.fone
- FCPX Countdown Timer in 3 Simple Steps
- 2024 Approved How To Speed Up Videos on QuickTime Player
- New From iMovie to Pro The Best Apple Video Editing Software Options
- Updated Elevate Your WhatsApp Status Game with These Top Apps
- How to Transfer Data from Oppo Find N3 to Any iOS Devices | Dr.fone
- In 2024, Essential Tools for Creating Dynamic Talking Avatars
- In 2024, Planning to Use a Pokemon Go Joystick on Tecno Pova 5 Pro? | Dr.fone
- Updated Narakeet Review Text to Speech Convenient Voice Maker
- How to Unlock Vivo X100 Phone with Broken Screen
- 2024 Approved Do You Want Your Music Videos to Look Like Professional Music Videos? You Can Always Choose From Music Videos LUTs to Give Your Videos a Cinematic Touch
- Title: New Video Formatting Made Easy Change Shape, Size, and Aspect Ratio
- Author: Charlotte
- Created at : 2024-05-19 10:32:53
- Updated at : 2024-05-20 10:32:53
- Link: https://smart-video-creator.techidaily.com/new-video-formatting-made-easy-change-shape-size-and-aspect-ratio/
- License: This work is licensed under CC BY-NC-SA 4.0.
