Updated 2024 Approved No Cost, High Reward Top 10 Free Online Video Quality Enhancement Tools

Charlotte Lv12

2024-04-29 06:40:43 2024-04-29 06:40:43 Created 2024-04-30 06:40:43 2024-04-30 06:40:43 Updated

ai
>
video

No Cost, High Reward: Top 10 Free Online Video Quality Enhancement Tools

1 - OpenShot	2 - OBS Studio	3 - PiTiVi	4 - Kdenlive
5 - Shotcut	6 - Lightworks	7 - HitFilm Express	8 - VLC
9 - Cinelerra	10 - Blender

1 - OpenShot	2 - OBS Studio	3 - PiTiVi	4 - Kdenlive
5 - Shotcut	6 - Lightworks	7 - HitFilm Express	8 - VLC
9 - Cinelerra	10 - Blender

1 - OpenShot	2 - OBS Studio	3 - PiTiVi	4 - Kdenlive
5 - Shotcut	6 - Lightworks	7 - HitFilm Express	8 - VLC
9 - Cinelerra	10 - Blender

1 - OpenShot	2 - OBS Studio	3 - PiTiVi	4 - Kdenlive
5 - Shotcut	6 - Lightworks	7 - HitFilm Express	8 - VLC
9 - Cinelerra	10 - Blender

How to Make Ken Burns Effect in Final Cut Pro?

Liza Brown

Mar 27, 2024• Proven solutions

Ken Burns Effect is an advanced feature of Final Cut Pro that allows users to add creative animations to their videos and images within minutes. You just need to select your picture, add movements to the clip, and choose the start and the end position to produce high-resolution stills. Besides, you can do a tilt, zoom in, a pan, or a combination of these three moves on a single image. This way, you can use the Ken Burns Effect to highlight the stimulating features in your photograph and save your memories in the form of innovative and high-definition animated clips.

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Final Cut Pro is user-friendly software and makes it easy for you to create a Ken Burns Effect without having advanced skills and expertise. So, are you interested in knowing the best part? Given below are a few simple steps to create Ken Burns Effect and make your pictures and videos look adorable.

Step 1: Add Images to the Timeline

First of all, you should specify a name for your project and add photos to the timeline in Final Cut Pro. For this purpose, select multiple photos and press E. A clip will be added to the timeline as shown in figure 1.

Step 2: Check Your Settings

As you can see, our timeline has no other video clip. Hence, Final Cut Pro will not recognize the clip until you adjust the video properties such as format, resolution, and rate, etc. For this purpose, click OK to use your preferred settings and press Shift + Z to fit the picture to your timeline window. Once you’re done it’s time to apply the Ken Burns Effect.

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

In the Ken Burns display, you can see the controls for adjusting the panning and zooms effects by changing the size and position of two-colored rectangles overlaying on the clip. To customize the Ken Burns effect:

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

You’re not done yet because you need to hold your picture at the end of the animation. For this purpose, you should create a freezing frame at the end of the clip to make Ken Burns do this. Here’s the deal:

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

The users can also adjust the speed of the animation and the duration of the freeze-frame by trimming your clip. For this purpose, trim the length as per your requirement and it will optimize the speed as shown in figure 6.

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

After you have optimized the speed of the Ken Burns Effect by trimming the clip’s length and have widened the shot to include everyone, it’s time to preview the changes you have made. Given below are simple steps:

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Although you can apply a single Ken Burns movement to your image, you can still give the impression of multiple movements being used. This means the Ken Burns Effect can be added to multiple camera movements by duplicating the photo and building numerous movements in sequence.

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

The Ken Burns Effect is a feature in Final Cut Pro to create a pan and zoom effect by using your predefined start and end positions. Basically, it is a crop effect with one crop at the start of the clip while the other at the end. Ken Burns Effect can be further customized by adjusting the smoothness of the animation. While creating a Ken Burns Effect, the motion applied to the video clips gets automatically smoothed to accelerate and decelerate the movement slowly at the start and the end of the animation.

Why the Effect is named after Ken Burns?

Now, as you have learned the purpose of the Ken Burns Effect, you must be curious about its name. It is named after American documentarian Ken Burns, who is known for his instantly recognizable and highly influential visual aesthetic. Surprisingly, Ken Burns did not invent this Ken Burns Effect; rather, it has existed for decades. You might be wondering why the technique was then named after Ken Burns. This was due to the persistent and adroit use of this technique that it is now known as the Ken Burns Effect.

What are the Applications of Ken Burns Effect?

Primarily, the Ken Burns Effect is used due to the unavailability of a film or video. The technique gives action to still photographs to glorify the subjects of interest like couples in wedding photography. It gets better and better as you apply simulated parallax with Ken Burns Effect to make your 2D images appear as 3D plus advanced zooming visuals. You can also use the Ken Burns effect to make a video of your graduation ceremony pictures or memorable moments of reunion. Ken Burns Effect is also used in documentaries by professional filmmakers and editors.

Conclusion

Adding animated effects to your pictures and videos makes them look gorgeous. This is crazy, isn’t it, when you impress your peers with your editing skills. So, what’s the bottom line of this whole discussion? Try adding the Ken Burns Effect with Final Cut Pro to create a pan and zoom effect on your pictures and clips get the output in your desired format.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Step 1: Add Images to the Timeline

Step 2: Check Your Settings

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

Why the Effect is named after Ken Burns?

What are the Applications of Ken Burns Effect?

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Step 1: Add Images to the Timeline

Step 2: Check Your Settings

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

Why the Effect is named after Ken Burns?

What are the Applications of Ken Burns Effect?

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Step 1: Add Images to the Timeline

Step 2: Check Your Settings

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

Why the Effect is named after Ken Burns?

What are the Applications of Ken Burns Effect?

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

FCPX Beauty Essentials: How to Achieve Smooth Skin Without Plugins

Full Guide: How to Add a Skin Smoother Effect with Final Cut Pro

Liza Brown

Mar 27, 2024• Proven solutions

It’s quite common for vloggers to try to show the best of their states. However, makeup, weather, and the shooting equipment may disagree. So, how to tackle this problem?

Fortunately, we have the best solutions to fix the skin tone issue by using FCPX’s built-in tools or smooth skin plugins. You will learn how to strategically adjust your footage’s look for stylistic purposes and impress your audience with your video-editing skills. Now, let’s understand what a skin smoother effect is before learning how to add it in FCPX.

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Part 2: Where to Find Good Skin Smoother Plugins?

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Part 4: How to Smooth Skin in Filmora?

Part 5: How to smooth skin in Adobe Pro?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Smoothening the skin in Final Cut Pro is very simple. Simply select the video, choose Video effects to be applied, and adjust the percentages from the Inspector pane. You will get wrinkle-free skin with an astonishing look. While multiple plugins are also available to apply a skin smoother effect, you can use the built-in features of Final Cut Pro to smoothen the skin and decrease the amount of contrast.

Here’s how you can do this:

step1Choose the starting image and edit the clip into the timeline. Press Option and make a connected copy of the clip by dragging it up. The start and end points should match for syncing. In the Effects Browser, drag Blur > Gaussian Blur to apply the blur effect on the upper clip.

step2Open the Inspector pan and select Compositing from its bottom. Switch the Blend Mode to Lighten and adjust the Opacity slider as per your desired glow. Usually, 40 to 45% is ideal.

step3Now, go to the top of the Inspector and turn on the blue checkbox next to Gaussian. Adjust the blurring effect until you achieve your desired level of skin softening. It is highly recommended to blur using the horizontal setting to soften the skin while keeping the eyes sharp. Here, the glow is controlled by Opacity while skin softening is controlled by the Blue Amount.

For better results, add a Vignette by selecting and combining the two clips into a Compound Clip. From the Effects Browser, select Stylize > Vignette and adjust drag the vignette. Now, customize the compound clip settings in the Inspector pane until you achieve your desired look. Compare the results between two images before and after editing

Part 2: Where to Find Good Skin Smoother Plugins?

Plugins make it easy for beginners and users with limited expertise to add a skin smoother effect in Final Cut Pro X. You can find both free and paid skin smoother plugins for FCPX online. Given below are some popular skin smoothening plugins for Final Cut Pro X.

Skin Smoother 2

Skin Smoother 2 is a powerful and easy-to-use plugin that allows you to smooth out unwanted skin details and enhance your facial appearance.

Price: $19.99 (One-time Charges)

Software Requirements: FCP 10.2 or later

Features:

Enhanced control over facial adjustments with fine-tuning giving more natural results;
Precise color sampling without a need to match up with present skin tones; and
3 to 5 times faster rendering.

Color Finale

Color Finale is a user-friendly, fine-tuned, and fully-featured professional skin smoother plugin purpose bit for FCP.

Price: $152

Software Requirements: FCP 10.4.8 - 10.5.1

Features:

Color wheels, curves, and LUT utilities;
A complete professional color toolset for videographers, colorists, and editors; and
Allows personal preference on the interface.

Universe

A comprehensive FCP tool with 89 individual plugins to apply the next-generation skin smoothening and facial improvement effects.

Price: $199/year

Software Requirements: FCPX 10.5 or later

Features:

Advanced transitions and effects and motion graphics tools;
A variety of cool presents and text generators; and
Number counters, chromatic aberration, VHS looks, camera shake, glitch effects.

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Follow these steps to use the Skin Smooth 2 Plugin for Final Cut Pro X:

Purchase and download the Skin Smoother 2 plugin. Go to downloads, unzip the folder containing the plugin and install it on your computer.
Open the FCPX, go to Effects, and click on Skin Smoother 2. A list of options will appear. Import the image or video you want to edit.
To apply the skin-smoothing effect, click on Add Color Mask, and select the areas of the face where the color mask has to be added.
Adjust the Skin Smoothing, Smoothing Mix, and the Softness of the color mask as per your requirements.
Finally, click on Add Shape Mask, two circles will appear on the image. Adjust the covering area of both circles for Shape Mask 1 to add a smiling face.

Part 4: How to Smooth Skin in Filmora?

Wondershare Filmora features advanced tuning tools and a variety of video filters and overlays. Learn how to smooth skin or beautify your face in the video with this advanced video-editing software.

Open Filmora, open New Project and click Import to load your videos to the timeline.
Double click on the video to open the editing window. Open the Color panel and adjust parameters according to your preference such as white balance, tone, and 3D LUT, etc.
Open the toolbar, click the Advanced Color Tuning icon, go to the advanced color tuning window, and adjust the white balance, color tint and temperature, HSL, 3D LUT, Vignette, and Light. If you are a beginner, try applying the present templates.
To set a specific tone or beautify your video, open the Tools tab and click the Color Correction option to change the color tones.
Open Effects and Transitions and select the skin smooth filter. Hover the cursor over the filter and click the plus icon in the middle to add that effect. You can also apply the effect to the whole clip by dragging and dropping it directly onto the video clip.

Part 5: How to smooth skin in Adobe Pro?

Given below are simple steps to create a face matter, control the skin smoothing, adjust color correction, and correct the skin glow in Adobe Pro by using the Beauty Studio Effect:

Applying the Beauty Studio effect smoothens all parts of the image including the background. However, it will make your footage look artificial, which is not desired. Hence, turn on the Pixel Chooser, pick two colors with the eye dropper tool. Color A for the darker area and Color B for the lighter area.
Underneath the Mocha Matte, use the eyedropper tool to select colors on the skin of the subject in your footage.
Now, click on View Matte/Mask to visualize the image areas where you are applying the skin smoothing effect. The Beauty Studio will affect the smoothing effect in the white area while the black area will remain unsmoothed.
Adjust the Saturation, Hue, and Luma softness to enhance the appearance of the skin, eyes, and mouth.
To prevent the rest of the image from getting affected, create a Mocha mask around the face by clicking on the Mocha logo and drawing a mask with the X-Spline tool. Make sure the mask moves as the subject is moved after your track forward and back.
Beauty Studio offers four levels of skin smoothing. You can adjust these levels as per your situation by lowering the smoothing amount for each level. For better results, adjust the levels at 70 or below.
For the final touch, adjust the sharpening between 10-20 points, add saturation between 3 to 8 points for color correction, and add 5 to 10 points of glow. Your image is ready, compare the results before and after applying the effect.

Conclusion

Smooth skin with clear facial expressions attracts everyone. You can apply a skin smooth effect in your video by using advanced video editing tools like Final Cut Pro, Adobe Premium, and Wondershare Filmora.

There are two methods to add a skin smooth effect with FCPX: By using in-built software settings, or by using plugins like Skin Smoother 2, Color Finale, and Universe. Use Beauty Studio Effect in Adobe Pro to smooth skin and improve facial appearance. Finally, you can beautify the face in your video by adding transitions, making color adjustments, and applying different effects with Wondershare Filmora.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

It’s quite common for vloggers to try to show the best of their states. However, makeup, weather, and the shooting equipment may disagree. So, how to tackle this problem?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Part 2: Where to Find Good Skin Smoother Plugins?

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Part 4: How to Smooth Skin in Filmora?

Part 5: How to smooth skin in Adobe Pro?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Here’s how you can do this:

step2Open the Inspector pan and select Compositing from its bottom. Switch the Blend Mode to Lighten and adjust the Opacity slider as per your desired glow. Usually, 40 to 45% is ideal.

Part 2: Where to Find Good Skin Smoother Plugins?

Skin Smoother 2

Skin Smoother 2 is a powerful and easy-to-use plugin that allows you to smooth out unwanted skin details and enhance your facial appearance.

Price: $19.99 (One-time Charges)

Software Requirements: FCP 10.2 or later

Features:

Enhanced control over facial adjustments with fine-tuning giving more natural results;
Precise color sampling without a need to match up with present skin tones; and
3 to 5 times faster rendering.

Color Finale

Color Finale is a user-friendly, fine-tuned, and fully-featured professional skin smoother plugin purpose bit for FCP.

Price: $152

Software Requirements: FCP 10.4.8 - 10.5.1

Features:

Color wheels, curves, and LUT utilities;
A complete professional color toolset for videographers, colorists, and editors; and
Allows personal preference on the interface.

Universe

A comprehensive FCP tool with 89 individual plugins to apply the next-generation skin smoothening and facial improvement effects.

Price: $199/year

Software Requirements: FCPX 10.5 or later

Features:

Advanced transitions and effects and motion graphics tools;
A variety of cool presents and text generators; and
Number counters, chromatic aberration, VHS looks, camera shake, glitch effects.

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Follow these steps to use the Skin Smooth 2 Plugin for Final Cut Pro X:

Purchase and download the Skin Smoother 2 plugin. Go to downloads, unzip the folder containing the plugin and install it on your computer.
Open the FCPX, go to Effects, and click on Skin Smoother 2. A list of options will appear. Import the image or video you want to edit.
To apply the skin-smoothing effect, click on Add Color Mask, and select the areas of the face where the color mask has to be added.
Adjust the Skin Smoothing, Smoothing Mix, and the Softness of the color mask as per your requirements.
Finally, click on Add Shape Mask, two circles will appear on the image. Adjust the covering area of both circles for Shape Mask 1 to add a smiling face.

Part 4: How to Smooth Skin in Filmora?

Wondershare Filmora features advanced tuning tools and a variety of video filters and overlays. Learn how to smooth skin or beautify your face in the video with this advanced video-editing software.

Open Filmora, open New Project and click Import to load your videos to the timeline.
Double click on the video to open the editing window. Open the Color panel and adjust parameters according to your preference such as white balance, tone, and 3D LUT, etc.
Open the toolbar, click the Advanced Color Tuning icon, go to the advanced color tuning window, and adjust the white balance, color tint and temperature, HSL, 3D LUT, Vignette, and Light. If you are a beginner, try applying the present templates.
To set a specific tone or beautify your video, open the Tools tab and click the Color Correction option to change the color tones.
Open Effects and Transitions and select the skin smooth filter. Hover the cursor over the filter and click the plus icon in the middle to add that effect. You can also apply the effect to the whole clip by dragging and dropping it directly onto the video clip.

Part 5: How to smooth skin in Adobe Pro?

Given below are simple steps to create a face matter, control the skin smoothing, adjust color correction, and correct the skin glow in Adobe Pro by using the Beauty Studio Effect:

Applying the Beauty Studio effect smoothens all parts of the image including the background. However, it will make your footage look artificial, which is not desired. Hence, turn on the Pixel Chooser, pick two colors with the eye dropper tool. Color A for the darker area and Color B for the lighter area.
Underneath the Mocha Matte, use the eyedropper tool to select colors on the skin of the subject in your footage.
Now, click on View Matte/Mask to visualize the image areas where you are applying the skin smoothing effect. The Beauty Studio will affect the smoothing effect in the white area while the black area will remain unsmoothed.
Adjust the Saturation, Hue, and Luma softness to enhance the appearance of the skin, eyes, and mouth.
To prevent the rest of the image from getting affected, create a Mocha mask around the face by clicking on the Mocha logo and drawing a mask with the X-Spline tool. Make sure the mask moves as the subject is moved after your track forward and back.
Beauty Studio offers four levels of skin smoothing. You can adjust these levels as per your situation by lowering the smoothing amount for each level. For better results, adjust the levels at 70 or below.
For the final touch, adjust the sharpening between 10-20 points, add saturation between 3 to 8 points for color correction, and add 5 to 10 points of glow. Your image is ready, compare the results before and after applying the effect.

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

It’s quite common for vloggers to try to show the best of their states. However, makeup, weather, and the shooting equipment may disagree. So, how to tackle this problem?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Part 2: Where to Find Good Skin Smoother Plugins?

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Part 4: How to Smooth Skin in Filmora?

Part 5: How to smooth skin in Adobe Pro?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Here’s how you can do this:

step2Open the Inspector pan and select Compositing from its bottom. Switch the Blend Mode to Lighten and adjust the Opacity slider as per your desired glow. Usually, 40 to 45% is ideal.

Part 2: Where to Find Good Skin Smoother Plugins?

Skin Smoother 2

Skin Smoother 2 is a powerful and easy-to-use plugin that allows you to smooth out unwanted skin details and enhance your facial appearance.

Price: $19.99 (One-time Charges)

Software Requirements: FCP 10.2 or later

Features:

Enhanced control over facial adjustments with fine-tuning giving more natural results;
Precise color sampling without a need to match up with present skin tones; and
3 to 5 times faster rendering.

Color Finale

Color Finale is a user-friendly, fine-tuned, and fully-featured professional skin smoother plugin purpose bit for FCP.

Price: $152

Software Requirements: FCP 10.4.8 - 10.5.1

Features:

Color wheels, curves, and LUT utilities;
A complete professional color toolset for videographers, colorists, and editors; and
Allows personal preference on the interface.

Universe

A comprehensive FCP tool with 89 individual plugins to apply the next-generation skin smoothening and facial improvement effects.

Price: $199/year

Software Requirements: FCPX 10.5 or later

Features:

Advanced transitions and effects and motion graphics tools;
A variety of cool presents and text generators; and
Number counters, chromatic aberration, VHS looks, camera shake, glitch effects.

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Follow these steps to use the Skin Smooth 2 Plugin for Final Cut Pro X:

Purchase and download the Skin Smoother 2 plugin. Go to downloads, unzip the folder containing the plugin and install it on your computer.
Open the FCPX, go to Effects, and click on Skin Smoother 2. A list of options will appear. Import the image or video you want to edit.
To apply the skin-smoothing effect, click on Add Color Mask, and select the areas of the face where the color mask has to be added.
Adjust the Skin Smoothing, Smoothing Mix, and the Softness of the color mask as per your requirements.
Finally, click on Add Shape Mask, two circles will appear on the image. Adjust the covering area of both circles for Shape Mask 1 to add a smiling face.

Part 4: How to Smooth Skin in Filmora?

Wondershare Filmora features advanced tuning tools and a variety of video filters and overlays. Learn how to smooth skin or beautify your face in the video with this advanced video-editing software.

Open Filmora, open New Project and click Import to load your videos to the timeline.
Double click on the video to open the editing window. Open the Color panel and adjust parameters according to your preference such as white balance, tone, and 3D LUT, etc.
Open the toolbar, click the Advanced Color Tuning icon, go to the advanced color tuning window, and adjust the white balance, color tint and temperature, HSL, 3D LUT, Vignette, and Light. If you are a beginner, try applying the present templates.
To set a specific tone or beautify your video, open the Tools tab and click the Color Correction option to change the color tones.
Open Effects and Transitions and select the skin smooth filter. Hover the cursor over the filter and click the plus icon in the middle to add that effect. You can also apply the effect to the whole clip by dragging and dropping it directly onto the video clip.

Part 5: How to smooth skin in Adobe Pro?

Given below are simple steps to create a face matter, control the skin smoothing, adjust color correction, and correct the skin glow in Adobe Pro by using the Beauty Studio Effect:

Applying the Beauty Studio effect smoothens all parts of the image including the background. However, it will make your footage look artificial, which is not desired. Hence, turn on the Pixel Chooser, pick two colors with the eye dropper tool. Color A for the darker area and Color B for the lighter area.
Underneath the Mocha Matte, use the eyedropper tool to select colors on the skin of the subject in your footage.
Now, click on View Matte/Mask to visualize the image areas where you are applying the skin smoothing effect. The Beauty Studio will affect the smoothing effect in the white area while the black area will remain unsmoothed.
Adjust the Saturation, Hue, and Luma softness to enhance the appearance of the skin, eyes, and mouth.
To prevent the rest of the image from getting affected, create a Mocha mask around the face by clicking on the Mocha logo and drawing a mask with the X-Spline tool. Make sure the mask moves as the subject is moved after your track forward and back.
Beauty Studio offers four levels of skin smoothing. You can adjust these levels as per your situation by lowering the smoothing amount for each level. For better results, adjust the levels at 70 or below.
For the final touch, adjust the sharpening between 10-20 points, add saturation between 3 to 8 points for color correction, and add 5 to 10 points of glow. Your image is ready, compare the results before and after applying the effect.

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

It’s quite common for vloggers to try to show the best of their states. However, makeup, weather, and the shooting equipment may disagree. So, how to tackle this problem?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Part 2: Where to Find Good Skin Smoother Plugins?

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Part 4: How to Smooth Skin in Filmora?

Part 5: How to smooth skin in Adobe Pro?

Part 1: How to Add a Skin Smoother Effect without Plugins in Final Cut Pro?

Here’s how you can do this:

step2Open the Inspector pan and select Compositing from its bottom. Switch the Blend Mode to Lighten and adjust the Opacity slider as per your desired glow. Usually, 40 to 45% is ideal.

Part 2: Where to Find Good Skin Smoother Plugins?

Skin Smoother 2

Skin Smoother 2 is a powerful and easy-to-use plugin that allows you to smooth out unwanted skin details and enhance your facial appearance.

Price: $19.99 (One-time Charges)

Software Requirements: FCP 10.2 or later

Features:

Enhanced control over facial adjustments with fine-tuning giving more natural results;
Precise color sampling without a need to match up with present skin tones; and
3 to 5 times faster rendering.

Color Finale

Color Finale is a user-friendly, fine-tuned, and fully-featured professional skin smoother plugin purpose bit for FCP.

Price: $152

Software Requirements: FCP 10.4.8 - 10.5.1

Features:

Color wheels, curves, and LUT utilities;
A complete professional color toolset for videographers, colorists, and editors; and
Allows personal preference on the interface.

Universe

A comprehensive FCP tool with 89 individual plugins to apply the next-generation skin smoothening and facial improvement effects.

Price: $199/year

Software Requirements: FCPX 10.5 or later

Features:

Advanced transitions and effects and motion graphics tools;
A variety of cool presents and text generators; and
Number counters, chromatic aberration, VHS looks, camera shake, glitch effects.

Part 3: How to adopt Skin Smoothing Plugins into FCPX?

Follow these steps to use the Skin Smooth 2 Plugin for Final Cut Pro X:

Purchase and download the Skin Smoother 2 plugin. Go to downloads, unzip the folder containing the plugin and install it on your computer.
Open the FCPX, go to Effects, and click on Skin Smoother 2. A list of options will appear. Import the image or video you want to edit.
To apply the skin-smoothing effect, click on Add Color Mask, and select the areas of the face where the color mask has to be added.
Adjust the Skin Smoothing, Smoothing Mix, and the Softness of the color mask as per your requirements.
Finally, click on Add Shape Mask, two circles will appear on the image. Adjust the covering area of both circles for Shape Mask 1 to add a smiling face.

Part 4: How to Smooth Skin in Filmora?

Wondershare Filmora features advanced tuning tools and a variety of video filters and overlays. Learn how to smooth skin or beautify your face in the video with this advanced video-editing software.

Open Filmora, open New Project and click Import to load your videos to the timeline.
Double click on the video to open the editing window. Open the Color panel and adjust parameters according to your preference such as white balance, tone, and 3D LUT, etc.
Open the toolbar, click the Advanced Color Tuning icon, go to the advanced color tuning window, and adjust the white balance, color tint and temperature, HSL, 3D LUT, Vignette, and Light. If you are a beginner, try applying the present templates.
To set a specific tone or beautify your video, open the Tools tab and click the Color Correction option to change the color tones.
Open Effects and Transitions and select the skin smooth filter. Hover the cursor over the filter and click the plus icon in the middle to add that effect. You can also apply the effect to the whole clip by dragging and dropping it directly onto the video clip.

Part 5: How to smooth skin in Adobe Pro?

Given below are simple steps to create a face matter, control the skin smoothing, adjust color correction, and correct the skin glow in Adobe Pro by using the Beauty Studio Effect:

Applying the Beauty Studio effect smoothens all parts of the image including the background. However, it will make your footage look artificial, which is not desired. Hence, turn on the Pixel Chooser, pick two colors with the eye dropper tool. Color A for the darker area and Color B for the lighter area.
Underneath the Mocha Matte, use the eyedropper tool to select colors on the skin of the subject in your footage.
Now, click on View Matte/Mask to visualize the image areas where you are applying the skin smoothing effect. The Beauty Studio will affect the smoothing effect in the white area while the black area will remain unsmoothed.
Adjust the Saturation, Hue, and Luma softness to enhance the appearance of the skin, eyes, and mouth.
To prevent the rest of the image from getting affected, create a Mocha mask around the face by clicking on the Mocha logo and drawing a mask with the X-Spline tool. Make sure the mask moves as the subject is moved after your track forward and back.
Beauty Studio offers four levels of skin smoothing. You can adjust these levels as per your situation by lowering the smoothing amount for each level. For better results, adjust the levels at 70 or below.
For the final touch, adjust the sharpening between 10-20 points, add saturation between 3 to 8 points for color correction, and add 5 to 10 points of glow. Your image is ready, compare the results before and after applying the effect.

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Smart Video Creator

Updated 2024 Approved No Cost, High Reward Top 10 Free Online Video Quality Enhancement Tools

No Cost, High Reward: Top 10 Free Online Video Quality Enhancement Tools

Top 9 Best Online Video Quality Enhancer for FREE

Ollie Mattison

Why Do You Need an AI Video Enhancer?

5 Free AI Video Enhancers [Software Options]

1.Wondershare Filmora - AI Video Enhancer

Features

Pros

Cons

2.AVCLabs Video Enhancer AI

Features

Pros

Cons

3.UniFab Video Enhancer

Features

Pros

Cons

4.Topaz Video Enhance AI

Features

Pros

Cons

5.HitPaw Video Enhancer

Features

Pros

Cons

Top 2 4K Video Enhancer Online Free Options

1.Cutout.Pro

Features

Pros

Cons

2.Clideo Video Enhancer

Features

Pros

Cons

How to Choose the Best Video Enhancer

1.Type of Content

2.Consider The Features You Need

3.Sharing Formats and Requirements

4.Your Budget

Conclusion

Ollie Mattison

Why Do You Need an AI Video Enhancer?

5 Free AI Video Enhancers [Software Options]

1.Wondershare Filmora - AI Video Enhancer

Features

Pros

Cons

2.AVCLabs Video Enhancer AI

Features

Pros

Cons

3.UniFab Video Enhancer

Features

Pros

Cons

4.Topaz Video Enhance AI

Features

Pros

Cons

5.HitPaw Video Enhancer

Features

Pros

Cons

Top 2 4K Video Enhancer Online Free Options

1.Cutout.Pro

Features

Pros

Cons

2.Clideo Video Enhancer

Features

Pros

Cons

How to Choose the Best Video Enhancer

1.Type of Content

2.Consider The Features You Need

3.Sharing Formats and Requirements

4.Your Budget

Conclusion