FCP Audio Workflow: Streamlining Your Video Post-Production Process

How to Edit Audio of a Video on FCP

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Top-Rated Free 4K Video Editing Software

The Ultra HD video, also known as 4K video , defines 3840 2160 pixels. It became popular in 2016 and has overtaken both HD and ultra-HD to become the video with the highest resolution. Most videos are shot in HD, but as camera technology improves, 4K video seems to have become increasingly common. Because of the additional level of detail that the camera acquires, 4K videos are large files that allow you more editing possibilities.

Several free 4K video editing software has been developed to make video editing relatively easy in recent times. These free 4K video editors allow you to import, edit, and export videos easily. This article will provide you with some of the best free 4K video editors you should try in 2022.

In this article

01 Best Free 4K Video Editing Software for Windows and Mac

02 Things You Need to Pay Attention to Run Free 4K Video Editors

03 Tips for Editing 4K Videos Smoothly

Part 1: Top 5 Best Free 4K Video Editing Software for Windows and Mac

1. iMovie

Supported OS: iPhone, iPad, and Mac

iMovie is one of the most popular free 4K Video editing software. Using iMovie, you can create a professional-looking video even without any editing experience. You can import 4K images and 4K videos to iMovie, and then trim, split and add titles, transitions, filters or effects to the video by dragging and dropping. What’s more, you can import and export 60 frames per second video in iMovie.

iMovie is a video editing software that imports video footage from digital video cameras that use the MiniDV format. It can play DV, HDV, AVCHD, iFrame, Animation Codec, and other video formats. You can import 4K videos directly to iMovie and export them as 4K videos at 24fps/30fps/60fps. You can also share the 4K video to YouTube from iMovie directly.

Pros:

1. Switching across different devices:

This free 4K video editor is designed to work together using different devices (iPhone, iPad & Mac). You can begin a project on your iPhone, then transfer it to your iPad using AirDrop or iCloud Drive. It allows you to share what you have worked on to different devices, and you can also send projects from your iPad to your MacBook or iMac.

2. Advanced editing features:

What makes this free 4K video editor special is the ability to add some innovative editing functions when creating and editing your videos. Understandably, any video editor should offer basic editing features; however, iMovie allows you to work with more advanced functions like split-screen , picture-in-picture , and green-screen effects .

3. Saving all the original files

An advantage of working with different devices provides an opportunity to save all original files. It saves you time since you can import any media you need to get your project started in the video editor without losing the original files.

Cons:

• Distorted files: If you don’t follow the importing and exporting process, the files might get distorted, resulting in fuzzy images.
• Only available on iOS/macOS/iPad devices

2. VSDC

Supported OS: Windows 2000/XP/2003/Vista/7/8/10

VSDC is a free 4K video editor that allows for beginner-level editing. It supports recording voice-over, capturing the desktop screen, editing the video and audio files. With VSDC, you can blend multiple footage layers into a single composition. You can easily apply a picture-in-picture effect and make things change their appearance or position.

VSDC allows you to import 4K video, audio, and image files. To successfully import these files; Click ‘Shift + I’ to add an image, ‘Shift A’ to add an audio file, and ‘Shift V’ to add a video file. VSDC allows you to export 4K videos to PC or share to web platforms like YouTube. To export these files, go to the export project tab at the top, and then set the profile to the highest quality. Click the Edit profile button and then select the 4K preset from the list. Choose the video and audio quality size, and then save the video as 4K.

Pros:

• Every tool for video editing is available
• Amazing Visual Effects
• Efficient Text Processing
• Lots of Blending modes

Cons:

• Pro editing features are missing
• Available for Windows only
• Audio waveform and hardware acceleration features are not available

3. ShotCut

Supported OS: Windows, Mac, and Linux.

Shotcut is another free 4K video editor made for Linux, Macintosh, and Windows gadgets. It has wide arranged support that features its astounding usefulness. This 4K video editing software may not be the most alluring programming you see, yet it can assist with making the process of editing smooth and straightforward.

This professional video editing software support almost all the latest audio and video formats, including ProRes, DNxHD, and 4K, and it allows you to trim, cut, insert, and overwrite the video and audio. With its video effects, you can do color correction and grading, add fade-in and fade-out effects, reverse the clip, and even edit the 360° videos.

Here is a completed video tutorial from YouTuber Kevin Stratvert, which provides almost all information about how to use Shotcut, including how to create a project, add media, edit clips and export.

Pros:

• Easy Access: The 4K video editor is open source. Users can easily alter the source codes, enabling the process of editing simple and clear.
• Shotcut has every one of the required instruments to give excellent outcomes to clients. It has all elements of good video editing software and a bunch of other supportive and current choices.
• Shotcut offers an easy-to-use interface that allows you to finish a project quickly while having it examined by multiple members of your team. Its preview panel gives users access to a quick start menu, and its view menu lets them decide which features appear on the screen. The software’s video and audio filters are the most amazing of all its features. These filters can be customized, and they can be combined and layered in a variety of ways. Adjusting is now easier thanks to the easy checkbox and slider systems. Shotcut is so good that it makes even the most complicated effects understandable to the average user.

Cons:

• The platform might be a bit confusing when using the software for the first time because the interface isn’t intuitive.

4. LightWorks

Supported OS: Windows, Linux, and macOS

Lightworks is another video editor that can edit 4K videos from EditShare for people who have video editing experience. It has a simple and intuitive user interface, and you will find LOG, EDIT, VFX, and AUDIO tabs at the top of the interface. It integrates some paid royalty-free audio files, so you don’t need to find the background music from somewhere else. This software has some advanced editing features such as Multicam editing and batch export. It even supports third-party plugins, such as Boris FX, Boris Graffiti, and GenArts Sapphire. It enables its users to freely edit videos, even to the extent of trimming a video down to the size you desire.

However, if you want to export the videos in 4K, you need to pay, since it is limited to Lightworks Pro users.

Pros:

• The software allows clips to be easily imported and provides a platform where these clips can be played. This is made possible because this 4K video editor provides an interface made of panels such as bins, timeline, and edit review.
• Lightworks provides an easy way of applying varieties of effects from different clips in a coordinated manner. The software utilizes the hub-based framework to put together clips and recordings, which is needed for clips with numerous effects and tracks.
• Navigating this software, a right-click menu allows the user to export videos directly to YouTube. Also, the software automatically saves your work, so you don’t lose the files you’ve worked on.

Cons:

• Poor quality exporting options when making use of the free version (720p only)
• You need to register first to use it

5. Filmora Instant Cutter Tool

Supporting OS: Windows and Mac

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora is one of the best video editors for beginners to create professional-looking videos in a modern way. One of the biggest advantages of using Filmora is its resources. You can now search the resources in the search bar and drag and drop them to the timeline to preview the result without paying first.

Some of you may say, Filmora is not a free video editor since there will be a watermark at the export video. But here, I will introduce the Instant Cutter Tool which is a perfect tool to trim and merge large 4K videos and action camera videos. This free 4k tool provides a proper way of instantly trimming or merging videos without de-coding, which means the video resolution will not be changed. Using the instant cutter tool, you can upload or merge files of huge sizes in different formats, such as MP4/MOV or MTS/M2TS.

Note: You can try some legal ways to remove the Filmora watermark without paying .

Pros:

• Clean and Intuitive User Interface
• 4K Video Support
• Trim and merge large videos quickly

Cons:

• Limited video formats supported when using Instant Cutter Tool

Part 2: Things You Need to Pay Attention to Run Free 4K Video Editors

While the general features of the best free 4K video editors have been discussed, it’s important you are aware of some specific requirements your system must possess to edit your videos successfully. Irrespective of the kind of device you’re using to edit your videos, you need to pay attention to some features your device must have. However, these requirements depend on the 4K video editing software free.

• Central Processing Unit (CPU): The Processor of the software being used must be Intel Core i7, 2.3Ghz four-core; this is applicable if you will be editing your videos offline. Then, Dual Intel Xeon 2Ghz six-core is applicable if you will be editing your videos online.
• Random Access Memory (RAM): Preferably an 8GB Memory if you’re editing offline, and 32GB Memory if you’re editing online.
• Internal storage: The required storage must be sufficient because 4K videos are huge files.

Note: Offline editing refers to editing a proxy file of the original source material ; online editing is the editing of the original material.

Part 3: Tips for Editing 4K Videos Smoothly

• Choose the software based on your hardware: To choose the best 4K video editing software free, you must not opt for an editing software with higher requirements than your hardware; such software won’t work well on your device. You should instead select an editing software with lower requirements.
• Split large 4K videos into several parts: It has been reiterated that 4K videos are huge files; to edit your videos smoothly, it is recommended to split up the videos and edit one after the other. This will save you from heavy data loss.
• Enable graphics accelerator: A graphic accelerator is used in video editing to turbocharge your video exporting. It’s usually clung to a video board of your system. It makes the editing easier and faster by preventing a heavy workload.

02 Things You Need to Pay Attention to Run Free 4K Video Editors

03 Tips for Editing 4K Videos Smoothly

Part 1: Top 5 Best Free 4K Video Editing Software for Windows and Mac

1. iMovie

Supported OS: iPhone, iPad, and Mac

iMovie is one of the most popular free 4K Video editing software. Using iMovie, you can create a professional-looking video even without any editing experience. You can import 4K images and 4K videos to iMovie, and then trim, split and add titles, transitions, filters or effects to the video by dragging and dropping. What’s more, you can import and export 60 frames per second video in iMovie.

iMovie is a video editing software that imports video footage from digital video cameras that use the MiniDV format. It can play DV, HDV, AVCHD, iFrame, Animation Codec, and other video formats. You can import 4K videos directly to iMovie and export them as 4K videos at 24fps/30fps/60fps. You can also share the 4K video to YouTube from iMovie directly.

Pros:

1. Switching across different devices:

This free 4K video editor is designed to work together using different devices (iPhone, iPad & Mac). You can begin a project on your iPhone, then transfer it to your iPad using AirDrop or iCloud Drive. It allows you to share what you have worked on to different devices, and you can also send projects from your iPad to your MacBook or iMac.

2. Advanced editing features:

What makes this free 4K video editor special is the ability to add some innovative editing functions when creating and editing your videos. Understandably, any video editor should offer basic editing features; however, iMovie allows you to work with more advanced functions like split-screen , picture-in-picture , and green-screen effects .

3. Saving all the original files

An advantage of working with different devices provides an opportunity to save all original files. It saves you time since you can import any media you need to get your project started in the video editor without losing the original files.

Cons:

• Distorted files: If you don’t follow the importing and exporting process, the files might get distorted, resulting in fuzzy images.
• Only available on iOS/macOS/iPad devices

2. VSDC

Supported OS: Windows 2000/XP/2003/Vista/7/8/10

VSDC is a free 4K video editor that allows for beginner-level editing. It supports recording voice-over, capturing the desktop screen, editing the video and audio files. With VSDC, you can blend multiple footage layers into a single composition. You can easily apply a picture-in-picture effect and make things change their appearance or position.

VSDC allows you to import 4K video, audio, and image files. To successfully import these files; Click ‘Shift + I’ to add an image, ‘Shift A’ to add an audio file, and ‘Shift V’ to add a video file. VSDC allows you to export 4K videos to PC or share to web platforms like YouTube. To export these files, go to the export project tab at the top, and then set the profile to the highest quality. Click the Edit profile button and then select the 4K preset from the list. Choose the video and audio quality size, and then save the video as 4K.

Pros:

• Every tool for video editing is available
• Amazing Visual Effects
• Efficient Text Processing
• Lots of Blending modes

Cons:

• Pro editing features are missing
• Available for Windows only
• Audio waveform and hardware acceleration features are not available

3. ShotCut

Supported OS: Windows, Mac, and Linux.

Shotcut is another free 4K video editor made for Linux, Macintosh, and Windows gadgets. It has wide arranged support that features its astounding usefulness. This 4K video editing software may not be the most alluring programming you see, yet it can assist with making the process of editing smooth and straightforward.

This professional video editing software support almost all the latest audio and video formats, including ProRes, DNxHD, and 4K, and it allows you to trim, cut, insert, and overwrite the video and audio. With its video effects, you can do color correction and grading, add fade-in and fade-out effects, reverse the clip, and even edit the 360° videos.

Here is a completed video tutorial from YouTuber Kevin Stratvert, which provides almost all information about how to use Shotcut, including how to create a project, add media, edit clips and export.

Pros:

• Easy Access: The 4K video editor is open source. Users can easily alter the source codes, enabling the process of editing simple and clear.
• Shotcut has every one of the required instruments to give excellent outcomes to clients. It has all elements of good video editing software and a bunch of other supportive and current choices.
• Shotcut offers an easy-to-use interface that allows you to finish a project quickly while having it examined by multiple members of your team. Its preview panel gives users access to a quick start menu, and its view menu lets them decide which features appear on the screen. The software’s video and audio filters are the most amazing of all its features. These filters can be customized, and they can be combined and layered in a variety of ways. Adjusting is now easier thanks to the easy checkbox and slider systems. Shotcut is so good that it makes even the most complicated effects understandable to the average user.

Cons:

• The platform might be a bit confusing when using the software for the first time because the interface isn’t intuitive.

4. LightWorks

Supported OS: Windows, Linux, and macOS

Lightworks is another video editor that can edit 4K videos from EditShare for people who have video editing experience. It has a simple and intuitive user interface, and you will find LOG, EDIT, VFX, and AUDIO tabs at the top of the interface. It integrates some paid royalty-free audio files, so you don’t need to find the background music from somewhere else. This software has some advanced editing features such as Multicam editing and batch export. It even supports third-party plugins, such as Boris FX, Boris Graffiti, and GenArts Sapphire. It enables its users to freely edit videos, even to the extent of trimming a video down to the size you desire.

However, if you want to export the videos in 4K, you need to pay, since it is limited to Lightworks Pro users.

Pros:

• The software allows clips to be easily imported and provides a platform where these clips can be played. This is made possible because this 4K video editor provides an interface made of panels such as bins, timeline, and edit review.
• Lightworks provides an easy way of applying varieties of effects from different clips in a coordinated manner. The software utilizes the hub-based framework to put together clips and recordings, which is needed for clips with numerous effects and tracks.
• Navigating this software, a right-click menu allows the user to export videos directly to YouTube. Also, the software automatically saves your work, so you don’t lose the files you’ve worked on.

Cons:

• Poor quality exporting options when making use of the free version (720p only)
• You need to register first to use it

5. Filmora Instant Cutter Tool

Supporting OS: Windows and Mac

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora is one of the best video editors for beginners to create professional-looking videos in a modern way. One of the biggest advantages of using Filmora is its resources. You can now search the resources in the search bar and drag and drop them to the timeline to preview the result without paying first.

Some of you may say, Filmora is not a free video editor since there will be a watermark at the export video. But here, I will introduce the Instant Cutter Tool which is a perfect tool to trim and merge large 4K videos and action camera videos. This free 4k tool provides a proper way of instantly trimming or merging videos without de-coding, which means the video resolution will not be changed. Using the instant cutter tool, you can upload or merge files of huge sizes in different formats, such as MP4/MOV or MTS/M2TS.

Note: You can try some legal ways to remove the Filmora watermark without paying .

Pros:

• Clean and Intuitive User Interface
• 4K Video Support
• Trim and merge large videos quickly

Cons:

• Limited video formats supported when using Instant Cutter Tool

Part 2: Things You Need to Pay Attention to Run Free 4K Video Editors

While the general features of the best free 4K video editors have been discussed, it’s important you are aware of some specific requirements your system must possess to edit your videos successfully. Irrespective of the kind of device you’re using to edit your videos, you need to pay attention to some features your device must have. However, these requirements depend on the 4K video editing software free.

• Central Processing Unit (CPU): The Processor of the software being used must be Intel Core i7, 2.3Ghz four-core; this is applicable if you will be editing your videos offline. Then, Dual Intel Xeon 2Ghz six-core is applicable if you will be editing your videos online.
• Random Access Memory (RAM): Preferably an 8GB Memory if you’re editing offline, and 32GB Memory if you’re editing online.
• Internal storage: The required storage must be sufficient because 4K videos are huge files.

Note: Offline editing refers to editing a proxy file of the original source material ; online editing is the editing of the original material.

Part 3: Tips for Editing 4K Videos Smoothly

• Choose the software based on your hardware: To choose the best 4K video editing software free, you must not opt for an editing software with higher requirements than your hardware; such software won’t work well on your device. You should instead select an editing software with lower requirements.
• Split large 4K videos into several parts: It has been reiterated that 4K videos are huge files; to edit your videos smoothly, it is recommended to split up the videos and edit one after the other. This will save you from heavy data loss.
• Enable graphics accelerator: A graphic accelerator is used in video editing to turbocharge your video exporting. It’s usually clung to a video board of your system. It makes the editing easier and faster by preventing a heavy workload.

02 Things You Need to Pay Attention to Run Free 4K Video Editors

03 Tips for Editing 4K Videos Smoothly

Part 1: Top 5 Best Free 4K Video Editing Software for Windows and Mac

1. iMovie

Supported OS: iPhone, iPad, and Mac

iMovie is one of the most popular free 4K Video editing software. Using iMovie, you can create a professional-looking video even without any editing experience. You can import 4K images and 4K videos to iMovie, and then trim, split and add titles, transitions, filters or effects to the video by dragging and dropping. What’s more, you can import and export 60 frames per second video in iMovie.

iMovie is a video editing software that imports video footage from digital video cameras that use the MiniDV format. It can play DV, HDV, AVCHD, iFrame, Animation Codec, and other video formats. You can import 4K videos directly to iMovie and export them as 4K videos at 24fps/30fps/60fps. You can also share the 4K video to YouTube from iMovie directly.

Pros:

1. Switching across different devices:

This free 4K video editor is designed to work together using different devices (iPhone, iPad & Mac). You can begin a project on your iPhone, then transfer it to your iPad using AirDrop or iCloud Drive. It allows you to share what you have worked on to different devices, and you can also send projects from your iPad to your MacBook or iMac.

2. Advanced editing features:

What makes this free 4K video editor special is the ability to add some innovative editing functions when creating and editing your videos. Understandably, any video editor should offer basic editing features; however, iMovie allows you to work with more advanced functions like split-screen , picture-in-picture , and green-screen effects .

3. Saving all the original files

An advantage of working with different devices provides an opportunity to save all original files. It saves you time since you can import any media you need to get your project started in the video editor without losing the original files.

Cons:

• Distorted files: If you don’t follow the importing and exporting process, the files might get distorted, resulting in fuzzy images.
• Only available on iOS/macOS/iPad devices

2. VSDC

Supported OS: Windows 2000/XP/2003/Vista/7/8/10

VSDC is a free 4K video editor that allows for beginner-level editing. It supports recording voice-over, capturing the desktop screen, editing the video and audio files. With VSDC, you can blend multiple footage layers into a single composition. You can easily apply a picture-in-picture effect and make things change their appearance or position.

VSDC allows you to import 4K video, audio, and image files. To successfully import these files; Click ‘Shift + I’ to add an image, ‘Shift A’ to add an audio file, and ‘Shift V’ to add a video file. VSDC allows you to export 4K videos to PC or share to web platforms like YouTube. To export these files, go to the export project tab at the top, and then set the profile to the highest quality. Click the Edit profile button and then select the 4K preset from the list. Choose the video and audio quality size, and then save the video as 4K.

Pros:

• Every tool for video editing is available
• Amazing Visual Effects
• Efficient Text Processing
• Lots of Blending modes

Cons:

• Pro editing features are missing
• Available for Windows only
• Audio waveform and hardware acceleration features are not available

3. ShotCut

Supported OS: Windows, Mac, and Linux.

Shotcut is another free 4K video editor made for Linux, Macintosh, and Windows gadgets. It has wide arranged support that features its astounding usefulness. This 4K video editing software may not be the most alluring programming you see, yet it can assist with making the process of editing smooth and straightforward.

This professional video editing software support almost all the latest audio and video formats, including ProRes, DNxHD, and 4K, and it allows you to trim, cut, insert, and overwrite the video and audio. With its video effects, you can do color correction and grading, add fade-in and fade-out effects, reverse the clip, and even edit the 360° videos.

Here is a completed video tutorial from YouTuber Kevin Stratvert, which provides almost all information about how to use Shotcut, including how to create a project, add media, edit clips and export.

Pros:

• Easy Access: The 4K video editor is open source. Users can easily alter the source codes, enabling the process of editing simple and clear.
• Shotcut has every one of the required instruments to give excellent outcomes to clients. It has all elements of good video editing software and a bunch of other supportive and current choices.
• Shotcut offers an easy-to-use interface that allows you to finish a project quickly while having it examined by multiple members of your team. Its preview panel gives users access to a quick start menu, and its view menu lets them decide which features appear on the screen. The software’s video and audio filters are the most amazing of all its features. These filters can be customized, and they can be combined and layered in a variety of ways. Adjusting is now easier thanks to the easy checkbox and slider systems. Shotcut is so good that it makes even the most complicated effects understandable to the average user.

Cons:

• The platform might be a bit confusing when using the software for the first time because the interface isn’t intuitive.

4. LightWorks

Supported OS: Windows, Linux, and macOS

Lightworks is another video editor that can edit 4K videos from EditShare for people who have video editing experience. It has a simple and intuitive user interface, and you will find LOG, EDIT, VFX, and AUDIO tabs at the top of the interface. It integrates some paid royalty-free audio files, so you don’t need to find the background music from somewhere else. This software has some advanced editing features such as Multicam editing and batch export. It even supports third-party plugins, such as Boris FX, Boris Graffiti, and GenArts Sapphire. It enables its users to freely edit videos, even to the extent of trimming a video down to the size you desire.

However, if you want to export the videos in 4K, you need to pay, since it is limited to Lightworks Pro users.

Pros:

• The software allows clips to be easily imported and provides a platform where these clips can be played. This is made possible because this 4K video editor provides an interface made of panels such as bins, timeline, and edit review.
• Lightworks provides an easy way of applying varieties of effects from different clips in a coordinated manner. The software utilizes the hub-based framework to put together clips and recordings, which is needed for clips with numerous effects and tracks.
• Navigating this software, a right-click menu allows the user to export videos directly to YouTube. Also, the software automatically saves your work, so you don’t lose the files you’ve worked on.

Cons:

• Poor quality exporting options when making use of the free version (720p only)
• You need to register first to use it

5. Filmora Instant Cutter Tool

Supporting OS: Windows and Mac

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora is one of the best video editors for beginners to create professional-looking videos in a modern way. One of the biggest advantages of using Filmora is its resources. You can now search the resources in the search bar and drag and drop them to the timeline to preview the result without paying first.

Some of you may say, Filmora is not a free video editor since there will be a watermark at the export video. But here, I will introduce the Instant Cutter Tool which is a perfect tool to trim and merge large 4K videos and action camera videos. This free 4k tool provides a proper way of instantly trimming or merging videos without de-coding, which means the video resolution will not be changed. Using the instant cutter tool, you can upload or merge files of huge sizes in different formats, such as MP4/MOV or MTS/M2TS.

Note: You can try some legal ways to remove the Filmora watermark without paying .

Pros:

• Clean and Intuitive User Interface
• 4K Video Support
• Trim and merge large videos quickly

Cons:

• Limited video formats supported when using Instant Cutter Tool

Part 2: Things You Need to Pay Attention to Run Free 4K Video Editors

While the general features of the best free 4K video editors have been discussed, it’s important you are aware of some specific requirements your system must possess to edit your videos successfully. Irrespective of the kind of device you’re using to edit your videos, you need to pay attention to some features your device must have. However, these requirements depend on the 4K video editing software free.

• Central Processing Unit (CPU): The Processor of the software being used must be Intel Core i7, 2.3Ghz four-core; this is applicable if you will be editing your videos offline. Then, Dual Intel Xeon 2Ghz six-core is applicable if you will be editing your videos online.
• Random Access Memory (RAM): Preferably an 8GB Memory if you’re editing offline, and 32GB Memory if you’re editing online.
• Internal storage: The required storage must be sufficient because 4K videos are huge files.

Note: Offline editing refers to editing a proxy file of the original source material ; online editing is the editing of the original material.

Part 3: Tips for Editing 4K Videos Smoothly

• Choose the software based on your hardware: To choose the best 4K video editing software free, you must not opt for an editing software with higher requirements than your hardware; such software won’t work well on your device. You should instead select an editing software with lower requirements.
• Split large 4K videos into several parts: It has been reiterated that 4K videos are huge files; to edit your videos smoothly, it is recommended to split up the videos and edit one after the other. This will save you from heavy data loss.
• Enable graphics accelerator: A graphic accelerator is used in video editing to turbocharge your video exporting. It’s usually clung to a video board of your system. It makes the editing easier and faster by preventing a heavy workload.

02 Things You Need to Pay Attention to Run Free 4K Video Editors

03 Tips for Editing 4K Videos Smoothly

Part 1: Top 5 Best Free 4K Video Editing Software for Windows and Mac

1. iMovie

Supported OS: iPhone, iPad, and Mac

iMovie is one of the most popular free 4K Video editing software. Using iMovie, you can create a professional-looking video even without any editing experience. You can import 4K images and 4K videos to iMovie, and then trim, split and add titles, transitions, filters or effects to the video by dragging and dropping. What’s more, you can import and export 60 frames per second video in iMovie.

iMovie is a video editing software that imports video footage from digital video cameras that use the MiniDV format. It can play DV, HDV, AVCHD, iFrame, Animation Codec, and other video formats. You can import 4K videos directly to iMovie and export them as 4K videos at 24fps/30fps/60fps. You can also share the 4K video to YouTube from iMovie directly.

Pros:

1. Switching across different devices:

This free 4K video editor is designed to work together using different devices (iPhone, iPad & Mac). You can begin a project on your iPhone, then transfer it to your iPad using AirDrop or iCloud Drive. It allows you to share what you have worked on to different devices, and you can also send projects from your iPad to your MacBook or iMac.

2. Advanced editing features:

What makes this free 4K video editor special is the ability to add some innovative editing functions when creating and editing your videos. Understandably, any video editor should offer basic editing features; however, iMovie allows you to work with more advanced functions like split-screen , picture-in-picture , and green-screen effects .

3. Saving all the original files

An advantage of working with different devices provides an opportunity to save all original files. It saves you time since you can import any media you need to get your project started in the video editor without losing the original files.

Cons:

• Distorted files: If you don’t follow the importing and exporting process, the files might get distorted, resulting in fuzzy images.
• Only available on iOS/macOS/iPad devices

2. VSDC

Supported OS: Windows 2000/XP/2003/Vista/7/8/10

VSDC is a free 4K video editor that allows for beginner-level editing. It supports recording voice-over, capturing the desktop screen, editing the video and audio files. With VSDC, you can blend multiple footage layers into a single composition. You can easily apply a picture-in-picture effect and make things change their appearance or position.

VSDC allows you to import 4K video, audio, and image files. To successfully import these files; Click ‘Shift + I’ to add an image, ‘Shift A’ to add an audio file, and ‘Shift V’ to add a video file. VSDC allows you to export 4K videos to PC or share to web platforms like YouTube. To export these files, go to the export project tab at the top, and then set the profile to the highest quality. Click the Edit profile button and then select the 4K preset from the list. Choose the video and audio quality size, and then save the video as 4K.

Pros:

• Every tool for video editing is available
• Amazing Visual Effects
• Efficient Text Processing
• Lots of Blending modes

Cons:

• Pro editing features are missing
• Available for Windows only
• Audio waveform and hardware acceleration features are not available

3. ShotCut

Supported OS: Windows, Mac, and Linux.

Shotcut is another free 4K video editor made for Linux, Macintosh, and Windows gadgets. It has wide arranged support that features its astounding usefulness. This 4K video editing software may not be the most alluring programming you see, yet it can assist with making the process of editing smooth and straightforward.

This professional video editing software support almost all the latest audio and video formats, including ProRes, DNxHD, and 4K, and it allows you to trim, cut, insert, and overwrite the video and audio. With its video effects, you can do color correction and grading, add fade-in and fade-out effects, reverse the clip, and even edit the 360° videos.

Here is a completed video tutorial from YouTuber Kevin Stratvert, which provides almost all information about how to use Shotcut, including how to create a project, add media, edit clips and export.

Pros:

• Easy Access: The 4K video editor is open source. Users can easily alter the source codes, enabling the process of editing simple and clear.
• Shotcut has every one of the required instruments to give excellent outcomes to clients. It has all elements of good video editing software and a bunch of other supportive and current choices.
• Shotcut offers an easy-to-use interface that allows you to finish a project quickly while having it examined by multiple members of your team. Its preview panel gives users access to a quick start menu, and its view menu lets them decide which features appear on the screen. The software’s video and audio filters are the most amazing of all its features. These filters can be customized, and they can be combined and layered in a variety of ways. Adjusting is now easier thanks to the easy checkbox and slider systems. Shotcut is so good that it makes even the most complicated effects understandable to the average user.

Cons:

• The platform might be a bit confusing when using the software for the first time because the interface isn’t intuitive.

4. LightWorks

Supported OS: Windows, Linux, and macOS

Lightworks is another video editor that can edit 4K videos from EditShare for people who have video editing experience. It has a simple and intuitive user interface, and you will find LOG, EDIT, VFX, and AUDIO tabs at the top of the interface. It integrates some paid royalty-free audio files, so you don’t need to find the background music from somewhere else. This software has some advanced editing features such as Multicam editing and batch export. It even supports third-party plugins, such as Boris FX, Boris Graffiti, and GenArts Sapphire. It enables its users to freely edit videos, even to the extent of trimming a video down to the size you desire.

However, if you want to export the videos in 4K, you need to pay, since it is limited to Lightworks Pro users.

Pros:

• The software allows clips to be easily imported and provides a platform where these clips can be played. This is made possible because this 4K video editor provides an interface made of panels such as bins, timeline, and edit review.
• Lightworks provides an easy way of applying varieties of effects from different clips in a coordinated manner. The software utilizes the hub-based framework to put together clips and recordings, which is needed for clips with numerous effects and tracks.
• Navigating this software, a right-click menu allows the user to export videos directly to YouTube. Also, the software automatically saves your work, so you don’t lose the files you’ve worked on.

Cons:

• Poor quality exporting options when making use of the free version (720p only)
• You need to register first to use it

5. Filmora Instant Cutter Tool

Supporting OS: Windows and Mac

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora is one of the best video editors for beginners to create professional-looking videos in a modern way. One of the biggest advantages of using Filmora is its resources. You can now search the resources in the search bar and drag and drop them to the timeline to preview the result without paying first.

Some of you may say, Filmora is not a free video editor since there will be a watermark at the export video. But here, I will introduce the Instant Cutter Tool which is a perfect tool to trim and merge large 4K videos and action camera videos. This free 4k tool provides a proper way of instantly trimming or merging videos without de-coding, which means the video resolution will not be changed. Using the instant cutter tool, you can upload or merge files of huge sizes in different formats, such as MP4/MOV or MTS/M2TS.

Note: You can try some legal ways to remove the Filmora watermark without paying .

Pros:

• Clean and Intuitive User Interface
• 4K Video Support
• Trim and merge large videos quickly

Cons:

• Limited video formats supported when using Instant Cutter Tool

Part 2: Things You Need to Pay Attention to Run Free 4K Video Editors

While the general features of the best free 4K video editors have been discussed, it’s important you are aware of some specific requirements your system must possess to edit your videos successfully. Irrespective of the kind of device you’re using to edit your videos, you need to pay attention to some features your device must have. However, these requirements depend on the 4K video editing software free.

• Central Processing Unit (CPU): The Processor of the software being used must be Intel Core i7, 2.3Ghz four-core; this is applicable if you will be editing your videos offline. Then, Dual Intel Xeon 2Ghz six-core is applicable if you will be editing your videos online.
• Random Access Memory (RAM): Preferably an 8GB Memory if you’re editing offline, and 32GB Memory if you’re editing online.
• Internal storage: The required storage must be sufficient because 4K videos are huge files.

Note: Offline editing refers to editing a proxy file of the original source material ; online editing is the editing of the original material.

Part 3: Tips for Editing 4K Videos Smoothly

• Choose the software based on your hardware: To choose the best 4K video editing software free, you must not opt for an editing software with higher requirements than your hardware; such software won’t work well on your device. You should instead select an editing software with lower requirements.
• Split large 4K videos into several parts: It has been reiterated that 4K videos are huge files; to edit your videos smoothly, it is recommended to split up the videos and edit one after the other. This will save you from heavy data loss.
• Enable graphics accelerator: A graphic accelerator is used in video editing to turbocharge your video exporting. It’s usually clung to a video board of your system. It makes the editing easier and faster by preventing a heavy workload.

Get the Best Free 3GP Video Rotator for Your Needs: Top Recommendations

Top 5 Best Free 3GP Video Rotators

Ollie Mattison

Mar 27, 2024• Proven solutions

3GP is a format generally used to store videos in 3G mobile phones. At times, when you make videos with your smart phone, they may look up side down because your smart phone has flipped the videos automatically. In this case, you would prefer to rotate 3GP videos 90 degrees for a better viewing. Here is a list of top 5 free 3GP video rotators.

• Movie Rotator 2.0
• Video Rotator
• Free Video Flip and Rotate
• Freemake Video Converter
• Any Video Converter
• Recommended: Wondershare Filmora (originally Wondershare Video Editor)

Movie Rotator 2.0

Movie Rotator 2.0 is the updated version of Movie Rotator. It’s fully compatible with Windows 7 and 8 and enables you to rotate videos in just one few clicks. In addition to 3GP, the software also supports other formats such as AVI, MPG, FLV, MP4, WMV, MOV and so much more.

Pros:

• Easy-to-use.

Cons:

• Only available for Windows 7 and 8.

Video Rotator

Video Rotator is an application for flipping video clips 90 degree clockwise, horizontal mirror, anticlockwise, or upside-down. The program supports over 15 popular video input formats which includes 3GP, MPG, AVI, FLV, WMV, MOV and MP4, etc. Video Rotator allows users to also save the rotated videos into 5 popular video formats: MPG, FLV, MP4, AVI, and MOV. This program supports batch mode which enables users are able to flip & rotate videos in bulk.

Pros:

• Supports various video formats;
• Straightforward and easy-to-use;
• Can rotate Videos in Bulk.

Cons:

• Crashed occasionally;
• No previewer.

Free Video Flip and Rotate

With Free Video Flip, you can flip or rotate video with a mouse click. It features different predefined presets and you can rotate the video by 90 degrees, 180 degrees in clockwise and anti-clockwise direction. Or flip the video vertically as well as horizontally to make more correction to the original video or rotated video.

Pros:

• Appealing user-interface.

Cons:

• It offers to install a lot of unwanted applications.

Freemake Video Converter

Freemake Video Converter is more than just a video converter. It also provides a very easy way for you to change the rotation of your movies. It supports various video formats like MOV, AVI, MP4, WMV, MKV, 3GP and more. Once you get going it’s easy to use, straightforward and uncomplicated.

Pros:

• Supports various video formats;
• Different video editing options;
• User-friendly interface and easy-to-use.

Cons:

• There is a charge to upgrade it to the Gold Version.

Any Video Converter

Any video Converter features a very easy-to-use interface. It even enables you to rotate in batches and do some smart editing like trimming, cropping, clipping as well. It’s a bit of all-singing, all-dancing rotating software as it also supports a huge amount of file formats, including 3GP of course.

Pros:

• Supports almost any video formats;
• Different video editing functions.

Cons:

• Can’t convert audio files.

Recommended: Wondershare Filmora (originally Wondershare Video Editor)

Wondershare Video Editor is a great program for 3GP rotation. With just some clicks, you can rotate the videos to normal viewing position. You are not only able to rotate your videos 90 degrees and more clockwise or anticlockwise, but also spin them vertically and horizontally. It has a fast rotation speed and will carry out the changes without tarnishing the original quality. In addition to 3GP, the software supports also other formats such as MOV, ASF, FLV, VOB, WMA, MP4, WMV, AVI, MKV, MPG and many more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

3GP is a format generally used to store videos in 3G mobile phones. At times, when you make videos with your smart phone, they may look up side down because your smart phone has flipped the videos automatically. In this case, you would prefer to rotate 3GP videos 90 degrees for a better viewing. Here is a list of top 5 free 3GP video rotators.

• Movie Rotator 2.0
• Video Rotator
• Free Video Flip and Rotate
• Freemake Video Converter
• Any Video Converter
• Recommended: Wondershare Filmora (originally Wondershare Video Editor)

Movie Rotator 2.0

Movie Rotator 2.0 is the updated version of Movie Rotator. It’s fully compatible with Windows 7 and 8 and enables you to rotate videos in just one few clicks. In addition to 3GP, the software also supports other formats such as AVI, MPG, FLV, MP4, WMV, MOV and so much more.

Pros:

• Easy-to-use.

Cons:

• Only available for Windows 7 and 8.

Video Rotator

Video Rotator is an application for flipping video clips 90 degree clockwise, horizontal mirror, anticlockwise, or upside-down. The program supports over 15 popular video input formats which includes 3GP, MPG, AVI, FLV, WMV, MOV and MP4, etc. Video Rotator allows users to also save the rotated videos into 5 popular video formats: MPG, FLV, MP4, AVI, and MOV. This program supports batch mode which enables users are able to flip & rotate videos in bulk.

Pros:

• Supports various video formats;
• Straightforward and easy-to-use;
• Can rotate Videos in Bulk.

Cons:

• Crashed occasionally;
• No previewer.

Free Video Flip and Rotate

With Free Video Flip, you can flip or rotate video with a mouse click. It features different predefined presets and you can rotate the video by 90 degrees, 180 degrees in clockwise and anti-clockwise direction. Or flip the video vertically as well as horizontally to make more correction to the original video or rotated video.

Pros:

• Appealing user-interface.

Cons:

• It offers to install a lot of unwanted applications.

Freemake Video Converter

Freemake Video Converter is more than just a video converter. It also provides a very easy way for you to change the rotation of your movies. It supports various video formats like MOV, AVI, MP4, WMV, MKV, 3GP and more. Once you get going it’s easy to use, straightforward and uncomplicated.

Pros:

• Supports various video formats;
• Different video editing options;
• User-friendly interface and easy-to-use.

Cons:

• There is a charge to upgrade it to the Gold Version.

Any Video Converter

Any video Converter features a very easy-to-use interface. It even enables you to rotate in batches and do some smart editing like trimming, cropping, clipping as well. It’s a bit of all-singing, all-dancing rotating software as it also supports a huge amount of file formats, including 3GP of course.

Pros:

• Supports almost any video formats;
• Different video editing functions.

Cons:

• Can’t convert audio files.

Recommended: Wondershare Filmora (originally Wondershare Video Editor)

Wondershare Video Editor is a great program for 3GP rotation. With just some clicks, you can rotate the videos to normal viewing position. You are not only able to rotate your videos 90 degrees and more clockwise or anticlockwise, but also spin them vertically and horizontally. It has a fast rotation speed and will carry out the changes without tarnishing the original quality. In addition to 3GP, the software supports also other formats such as MOV, ASF, FLV, VOB, WMA, MP4, WMV, AVI, MKV, MPG and many more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

3GP is a format generally used to store videos in 3G mobile phones. At times, when you make videos with your smart phone, they may look up side down because your smart phone has flipped the videos automatically. In this case, you would prefer to rotate 3GP videos 90 degrees for a better viewing. Here is a list of top 5 free 3GP video rotators.

• Movie Rotator 2.0
• Video Rotator
• Free Video Flip and Rotate
• Freemake Video Converter
• Any Video Converter
• Recommended: Wondershare Filmora (originally Wondershare Video Editor)

Movie Rotator 2.0

Movie Rotator 2.0 is the updated version of Movie Rotator. It’s fully compatible with Windows 7 and 8 and enables you to rotate videos in just one few clicks. In addition to 3GP, the software also supports other formats such as AVI, MPG, FLV, MP4, WMV, MOV and so much more.

Pros:

• Easy-to-use.

Cons:

• Only available for Windows 7 and 8.

Video Rotator

Video Rotator is an application for flipping video clips 90 degree clockwise, horizontal mirror, anticlockwise, or upside-down. The program supports over 15 popular video input formats which includes 3GP, MPG, AVI, FLV, WMV, MOV and MP4, etc. Video Rotator allows users to also save the rotated videos into 5 popular video formats: MPG, FLV, MP4, AVI, and MOV. This program supports batch mode which enables users are able to flip & rotate videos in bulk.

Pros:

• Supports various video formats;
• Straightforward and easy-to-use;
• Can rotate Videos in Bulk.

Cons:

• Crashed occasionally;
• No previewer.

Free Video Flip and Rotate

With Free Video Flip, you can flip or rotate video with a mouse click. It features different predefined presets and you can rotate the video by 90 degrees, 180 degrees in clockwise and anti-clockwise direction. Or flip the video vertically as well as horizontally to make more correction to the original video or rotated video.

Pros:

• Appealing user-interface.

Cons:

• It offers to install a lot of unwanted applications.

Freemake Video Converter

Freemake Video Converter is more than just a video converter. It also provides a very easy way for you to change the rotation of your movies. It supports various video formats like MOV, AVI, MP4, WMV, MKV, 3GP and more. Once you get going it’s easy to use, straightforward and uncomplicated.

Pros:

• Supports various video formats;
• Different video editing options;
• User-friendly interface and easy-to-use.

Cons:

• There is a charge to upgrade it to the Gold Version.

Any Video Converter

Any video Converter features a very easy-to-use interface. It even enables you to rotate in batches and do some smart editing like trimming, cropping, clipping as well. It’s a bit of all-singing, all-dancing rotating software as it also supports a huge amount of file formats, including 3GP of course.

Pros:

• Supports almost any video formats;
• Different video editing functions.

Cons:

• Can’t convert audio files.

Recommended: Wondershare Filmora (originally Wondershare Video Editor)

Wondershare Video Editor is a great program for 3GP rotation. With just some clicks, you can rotate the videos to normal viewing position. You are not only able to rotate your videos 90 degrees and more clockwise or anticlockwise, but also spin them vertically and horizontally. It has a fast rotation speed and will carry out the changes without tarnishing the original quality. In addition to 3GP, the software supports also other formats such as MOV, ASF, FLV, VOB, WMA, MP4, WMV, AVI, MKV, MPG and many more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

3GP is a format generally used to store videos in 3G mobile phones. At times, when you make videos with your smart phone, they may look up side down because your smart phone has flipped the videos automatically. In this case, you would prefer to rotate 3GP videos 90 degrees for a better viewing. Here is a list of top 5 free 3GP video rotators.

• Movie Rotator 2.0
• Video Rotator
• Free Video Flip and Rotate
• Freemake Video Converter
• Any Video Converter
• Recommended: Wondershare Filmora (originally Wondershare Video Editor)

Movie Rotator 2.0

Movie Rotator 2.0 is the updated version of Movie Rotator. It’s fully compatible with Windows 7 and 8 and enables you to rotate videos in just one few clicks. In addition to 3GP, the software also supports other formats such as AVI, MPG, FLV, MP4, WMV, MOV and so much more.

Pros:

• Easy-to-use.

Cons:

• Only available for Windows 7 and 8.

Video Rotator

Video Rotator is an application for flipping video clips 90 degree clockwise, horizontal mirror, anticlockwise, or upside-down. The program supports over 15 popular video input formats which includes 3GP, MPG, AVI, FLV, WMV, MOV and MP4, etc. Video Rotator allows users to also save the rotated videos into 5 popular video formats: MPG, FLV, MP4, AVI, and MOV. This program supports batch mode which enables users are able to flip & rotate videos in bulk.

Pros:

• Supports various video formats;
• Straightforward and easy-to-use;
• Can rotate Videos in Bulk.

Cons:

• Crashed occasionally;
• No previewer.

Free Video Flip and Rotate

With Free Video Flip, you can flip or rotate video with a mouse click. It features different predefined presets and you can rotate the video by 90 degrees, 180 degrees in clockwise and anti-clockwise direction. Or flip the video vertically as well as horizontally to make more correction to the original video or rotated video.

Pros:

• Appealing user-interface.

Cons:

• It offers to install a lot of unwanted applications.

Freemake Video Converter

Freemake Video Converter is more than just a video converter. It also provides a very easy way for you to change the rotation of your movies. It supports various video formats like MOV, AVI, MP4, WMV, MKV, 3GP and more. Once you get going it’s easy to use, straightforward and uncomplicated.

Pros:

• Supports various video formats;
• Different video editing options;
• User-friendly interface and easy-to-use.

Cons:

• There is a charge to upgrade it to the Gold Version.

Any Video Converter

Any video Converter features a very easy-to-use interface. It even enables you to rotate in batches and do some smart editing like trimming, cropping, clipping as well. It’s a bit of all-singing, all-dancing rotating software as it also supports a huge amount of file formats, including 3GP of course.

Pros:

• Supports almost any video formats;
• Different video editing functions.

Cons:

• Can’t convert audio files.

Recommended: Wondershare Filmora (originally Wondershare Video Editor)

Wondershare Video Editor is a great program for 3GP rotation. With just some clicks, you can rotate the videos to normal viewing position. You are not only able to rotate your videos 90 degrees and more clockwise or anticlockwise, but also spin them vertically and horizontally. It has a fast rotation speed and will carry out the changes without tarnishing the original quality. In addition to 3GP, the software supports also other formats such as MOV, ASF, FLV, VOB, WMA, MP4, WMV, AVI, MKV, MPG and many more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Also read: